Best Tuff Support Automotive Replacement Shock Lift Supports in 2026

OE replacement lift supports, easy fit

Compatible with dodge ram 1500 2500 3500 5500 2002-2010

Reference Number: 55276321AA,55276321AB,55276321AC, SG314036, 4364

Placement on Vehicle:Hood/Front

Extended Length:20.20" Compressed Length:12.18"

Easy to install with simple hand tools in just minutes

Placement on Vehicle: Back Glass

Fitment: 2000-2006 Cadillac Escalade; 2003-2006 Cadillac Escalade ESV; 2002-2006 Cadillac Escalade EXT

Fitment: 2000-2006 Chevrolet Suburban 1500; 2000-2006 Chevrolet Suburban 2500; 2000-2006 Chevrolet Tahoe; 2000-2006 GMC Yukon; 2000-2006 GMC Yukon XL 1500; 2000-2006 GMC Yukon XL 2500

【Fitmemt】Replacement for 2011-2014 Kia Sorento

【Part Number】OEM# PM3048, 201165, 6261, 817711U000, 81771-1u000, 317711U000, 31771-1U000

【Specification】Extended length: 18.90inches (center to center), compressed length: 12.12inches (center to center)

【Basic Info.】BDFHYK hood lift supports are compatible with Dodge 2002-2013 RAM 1500/ 2500/ 3500/ 4500/ 5500. Please see specifications at detail page.It has 2 items in one set and is installed at front hood. Hood struts are 11.81in compressed and 19.68in extended.No ball studs. 12+6 months warrany.

【Worry about the Fitting?】Dodge hood struts are exactly fitting for OE: 55276321AA, 55276321AB, 55276321AC, 8196174, 95980, SG314036, 4364.We compared all the dimensions with OEM product in order to make sure every aspect meets your expectation. And it is.

【Worry about the Easy-use?】BDFHYK gas struts are very easy to install. You can install it only by yourself with a flat screwdriver,but you need to hold your hood sefely first. We prepared online instructions for your reference. It's also very convenient after installed and almost like your original one. It's very soft during use.

YHTAUTO Affordable and Prime Rear Window Glass Lift Supports, Directly Fit

Replacement for Cadillac Escalade 2007-2014, Escalade ESV 2007-2011, Escalade ESV 2013-2014 Sport Utility---Does not fit pickup truck

Replacement for Chevrolet Suburban 1500/Tahoe 2007-2014, Suburban 2500 2007-2013---Sport Utility

Lids soft open gently, Ideal for supporting the lid to keep it open

Force: 18 Lbs(Per Strut), Length (Center-to-Center): 6.89 inch(175 mm), Compressed Length (Center-to-Center): 4.73 inch(120 mm)

Support opens lids to a maximum angle of 90 degrees. Available working temperature: -10℃~50℃/14℉-122℉

FITMENT - Struts shock lift supports prop rods for Jeep Grand Cherokee 1999 2000 2001 2002 2003 2004 Compatible with 4699 SG314030 SG404018 4048 SG314022 4528 lift support strut

QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications

FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate hatchback doors while they are open, no need to hold the door up with your head

【Perfect Fitment】Compatible with Dodge Challenger 2008-2018---Coupe

【Reference Number】Replacement for 04589645AB, 04589645AA, 6657, 244263, SG414063

【About Package】Package includes 2 pieces Lift Supports Strong. package with thick cardbord and air column bag, which provides shock absorption and protection during transportation

【Basic Info】The lift supports are universal and used for Leer ARE ATC Tacoma Camper Shell Topper RV or DIY box. It's 12 inches from side to side. Each strut can support 50 Lbs weight. Please don't compress it with your hand. It has a 12+6-month warranty for any quality problem and lifetime customer service.

【How to Choose Right One? 】We recommend that measure weight and length before purchasing. It will be more convenient for your shopping experience. The lift support can be used for DIY, RV, or camper shell. Please check OE number: C16-12104. Please notice that 50Lbs/ 12 inches （don't furnished with ball studs.）

【Worry about Easy-use? 】BDFHYK gas struts are very easy to install. You can install it only by yourself with a flat screwdriver. We prepared online instructions for your reference anytime and anywhere. It's also very convenient after installation and almost like your original one. It's very soft during use.

FITMENT - Lift supports struts rods gas spring for 2007 2008 2009 2010 2011 for Toyota Camry Compatible with 6333 lift support strut

QUALITY - Rust-resistant Nitride corrosion resistant piston rod extends product life, Multi-Lobe Seal make gas springs more tolerant to vibration and extreme temperature, 100% brand new and tested to meet or exceed OEM specifications

FUNCTION - Use compressed gas, contained in a cylinder and compressed by a piston, to exert a force to support the weight of front hood or rear liftgate tailgate trunk hatchback doors while they are open, no need to hold the door up with your head

Best Value：A Set of 2 gas struts suit for Car Pickup Truck Cap Tool Box Lid

Why Choose Us：180，000 times TUV Fatigue test，Precision steel pipe，High quality sealing ring，QPQ nitriding treatment，very safe.

APPLICATION：Gas Prop Shocks Most used for Car Pickup Truck Cap Tool Box Lid

Lids soft open gently,Ideal for supporting the lid to keep it open

Pressure:45N/10lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8"

Support opens lids to a maximum angle of 100 degrees. WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉mm).

28in Heavy duty gas strut most used for project such as truck toneau cover, snowmobile cap lift, heavy lid, heavy duty window, heavy toolbox lid, trailer cap and more heavy equipment.

Gas spring replacement interchage number. 100-175,100-200,12161,3100175,3100200,3100-200,8195618,AVM100-175,AVM100-200,AVM100-200ME,GS3100200,SE1000200ME,SE1000-200ME,SPD3100200,SPD-3100-200,ST280M200. Please check whether the original cylinder has the above OEM interchange number before purchasing for an exact match.

If you are unsure how to select the correct lift supoort, please contact us before purchase.

FORCE:22.5 Lbs/100 N(Per Strut),LENGTH(Center-to-Center):14.96 inch(380 mm),COMPRESSED LENGTH(Center-to-Center):9.06 inch(230 mm).Bracket Holes' Size: 8 mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉

SET OF 2 IN THE PACKAGE:It could hold open 22.5 lb individually or together for around 45lb on any object such as car lid ,trailer,bed,RV under-bed storage, trap door etc.mm(diameter),8 mm(diameter),10 mm X 8 mm(Length X Width).WORKING TEMPERATURE: -10 ℃ - 40 ℃/14℉-104℉

HOW TO INSTALL&ADJUST IT:The instructions is NOT included. Screws are NOT included. Just install it as the image shown in the description ,While if you still have problem, please kindly Click "Ask Seller" Besides Your Order for In-time Assistance

Fit for Chrysler 300 Sedan 2009-2010 Trunk Lid

Extended Length [in] 11.72 Compressed Length [in] 8.02

Replaces Part Numbers: 6373,4589618AA

【Perfect Fitment】Compatible with Buick Regal 1978-1987 Coupe, Estate Wagon 1982-1983 Wagon---Front Hood (Left and Right); Shaft Connection: 8mm; Body Connection: 10.2mm

【Reference Number】Replacement for 8195241, 25514798, 4428, SG330003, 901202, RB8795053, 95053, 613501

【About Package】Package includes 2 pieces Lift Supports. Strong package with thick cardboard and air column bag, which provides shock absorption and protection during transportation.

YHTAUTO Affordable and Prime Front Hood Bonnet Lift Supports Gas Struts, Directly Fit

Replacement for Acura MDX 2007 2008 2009 2010 2011 2012 2013 Sport Utility

Extended Length: 22.38 inches; Compressed Length: 13.63; Stroke Length: 8.75 inches

【Perfect Fitment 】Compatible with Nissan Maxima 2016-2019 Sedan---Front Hood (Left and Right Side)

【Reference Number】Replacement for 654704RA0A, PM3370

【About Package】Package includes 2 pieces Lift Supports. Strong package with thick cardbord and air column bag, which provides shock absorption and protection during transportation.

Replacement Part Number # - 84306929 23226162 23235697 23431143 84036214 84183516 84183515 23408748 23431142 23487668. Before ordering, please confirm compatibility and weather are suitable for your vehicle!

Compatible Vehicle - Rear Tailgate Power Lift compatible with 2015-2019 Cadillac Escalade, Escalade ESV; 2015-2020 Chevy Suburban, Tahoe, 2016-2019 Chevy Suburban 3500 HD; 2015-2020 GMC Yukon, Yukon XL.

Advantage - It’s easy to install, durable and corrosion-resistant, wear-resistant, heat-resistant, strong impact resistance, and good overall performance. More convenient to directly replace old or damaged.

Pls check our production description to make sure our lift support fit your vehicle

Replacement Lift Supports For:Trunk Caps, Camper,Marine,Toolbox & Universal Applications

Ext Length:15.157[Inch] Comp Length:9.449[Inch]

SACHS OE Quality Clutch Kit Application Matched for OE Form, Fit, and Function

Manufactured with high-quality materials, using state-of-the-art technology and processes

Delivers more transmittable torque and more stability, longer life and superior thermal resistance

【High Quality Material】: The zipelo lift support clamp is made of quality aluminum alloy material, and features a compact and lightweight design. Our lift support clamp is sturdy and solid, reliable and stable in structure, strong enough against breakage, wear, fracture and rust, serving you for a long time use.

【Practical Function】: The lift support clamp is designed with a brass core to protect your hood from scratches and damage caused by the clamp being tightened in place, ensuring a safe and secure fit every time. The car hood prop struts clamps can save more efforts when you have the repair work or check, due to the fact that the dropping weight can be dangerous, providing a safe and comfortable work environment.

【Easy to Use】: The clamp firmly maintains the lifting support clamp in a straight state. Place the tool on the lifting rod next to the cylinder block and tighten it with the knob until it is fixed on the lifting rod. The spark plug adjustment function is also easy to use, simply screw the spark plug into the tool, use the spark plug gap gauge to measure the gap size, and then adjust the gap by turning the knob.

Sach's provide best performance and dynamics while ensuring road grip and cornering behavior.

Built with the highest quality components to maximize quality and performance, providing improved steering response.

Sach's offers the best driving comfort withstanding challenging road conditions.

Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!

Force:100N/22.5lb (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8"

Support opens lids to a maximum angle of 90 degrees.Available working temperature :-10℃~50℃/14℉-122℉

Made in Mexico - Produced and Supplied to Automotive Manufacturer. Same performance and quality specifications. Exact replacement engineered for this application. Original opening and closing control of your hood, hatch or trunk.

Fit for 2019 - 2014, Acura RLX

Extended Length [in] 16,22