Best Complete Struts Automotive Replacement Struts in 2026

Replacement for [1992-2002 Ford Crown Victoria][1992-2002 Mercury Grand Marquis][1990-2002 Lincoln Town Car]

Design with premium hollow bumper prevents component against damage when the suspension bottoms out, and the durable Strut Dust Boot protects the strut rod and seal from dirt and debris.

Replace Complete Strut Assembly NO#: 65003c 90003 C-2614 CK-7800WS 45F-30-KIT

Includes: 2x Front Complete Strut Assembly with strut spring & strut mount + 2x Front Stabilizer / Sway Bar End Link

Replacement for 2003 2004 2005 Toyota Corolla quick struts 2006 2007 2008 Toyota Corolla strut shock assembly

Detroit Axle automotive replacement struts are complete and ready for installation with no additional work or special tool required for installation.

Allows you to compress the external coil springs on struts to replace shock absorbers, spring sets and repair bent struts and damaged spindles.

Suitable for use where space under wheel arch is limited.

Specification: Overall length of 12 inches (305 mm). Maximum load 2645lb (1200 kg). Use with 1/2" D ratchet or 0.8''(21 mm) socket or spanner.

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

QUICKER, SAFER, EASIER AND COMPLETE REPAIR -- Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor

RESTORES RIDE HEIGHT -- Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle's weight

VEHICLE-SPECIFIC DESIGN -- Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile

Since this part fits select application, please ensure that it fits yours.Material:steel,rubber

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Front Strut Tower Brace for 5.7L and 6.4L engine vehicles, Mopar logo

Attaches to front strut towers and production brace

Not compatible with vehicles equipped with "Shaker" Hood Scoop

Meets or exceed OEM performance requirements

Strong rubber

Replacement part

Fitment: Full set strut assembly Compatible with Chevrolet Cobalt 2005 2006 2007 2008 2009 2010;HHR 2006 2007 2008 2009 2010 2011, Pontiac G5 2007 2008 2009, PURSUIT 2005 2006.

Time to replace your old struts:1)The car make abnormal sound. 2)The car sink when the road is bad or load is heavy. 3)Oil Leakage. 4)The tire wear is frequent and irregular. 5)It's difficult to control the car. 6)Poor stability make you feel very uncomfortable.

Easy & Safe Installation: This is complete strut assembly, buckle holes are consistent with the original car in situ,so you can remove and replace it without take apart existing strut assembly or any other changes,easy and quick installation.

EASY-TO-USE SPRING COMPRESSOR: Easily remove and replace MacPherson strut springs with the broad contact hooks on our coil spring compressor tool; Our 3/4” (19mm) hex head on the threaded rod is designed to be hand-torqued with a ratchet or wrench

SAFE STRUT SPRING COMPRESSION: Strut compression is dangerous work; Our strut compressor features detent pins that keeps the strut spring in place during compression; Add anti-seizing compound to the threaded rod before using MacPherson Strut Compressor

STRUT MAINTENANCE TOOL: Remove MacPherson strut springs quickly and easily so that you can make repairs to the strut assembly; Access bent struts, strut tubes, and strut cartridges safely thanks to the power of our near universal strut compressor

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Replacement for 2000-2006 Hyundai Elantra (Models Built After 7/2000)

Oredy High Quality Quick Install Gas Shock Strut

Kit Includes: 2x Front Struts w/Coil Spring Assembly

Cross Reference Number: 2701-80661, 2701-80953, 341629, 61541, 61551, 81583, 81691, G63490, G63511, 344091, 344092, 565055, 565056, KG5467, KG5468, 32219, 32220, 37120, 37121

Product Type :Auto Part

Package Dimensions :8.89 Cm L X10.922 Cm W X22.098 Cm H

Country Of Origin :Thailand

Compatible for 2000-2006 Nissan Sentra (Detailed Application Below)

Replace Complete Strut Assembly NO#: 171312 15350 55S15350 G57036 1336339 ST8591 9212-0001 853316 D171312 2701-480161 K171312 145018

Includes a pair of Rear Complete Strut Assembly which Equiped with Strut, Soil, Spring, Mounts

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications

The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements

All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Compatible for 2005 Chevrolet Cobalt BASE MODEL-LS-L, Compatible for 2010 Chevrolet Cobalt BASE MODEL-LS-LT-LT TEAM CANADA, Compatible for 2009 Chevrolet Cobalt LS-LT, Compatible for 2006-2007 Chevrolet Cobalt LS-LT-LTZ (Detailed Application Below)

Replace Complete Strut Assembly NO#: 172179R 172179L

Includes 1 pairs of Front Complete Strut Assembly which Equipted with Strut, Soil, Spring and Mounts

Engine Torque Strut Mounts undergo extensive lab and vehicle fitment testing. Highest quality materials are utilized along with stringent quality control standards to meet or exceed OE specifications

The rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle's application requirements

All parts are tested throughout the manufacturing process to ensure proper management of engine torque and dampening of excess noise and vibration

Replacement for 2004 - 2012 Chevrolet Malibu, 2005 - 2010 Pontiac G6, 2007 - 2009 Saturn Aura

Kit Includes: 1x Left & 1x Right Front Struts Assembly

Notice: Orders for Two or More Struts Will Probably Be Shipped in Separate Packages!

Preassembled Suspension Strut Assembly Including Top Mount, Bearing Plate, Bumper, Insulators and Coil Spring

Restores Your Vehicle Factory Ride Height and Provides a Stable Comfortable Ride

Engineered for a Superior Fit and Trouble-Free Installation

Direct from manufacturer

Engineered to restore a vehicle's original ride, handling and control

The complete assembly unit is faster, safer, and easier to install than traditional struts

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Since this part fits select application, please ensure that it fits yours

DEA Products, Inc has been a trusted manufacturer of engine and transmission mounts in the aftermarket industry for over 30 years

Products are manufactured using the highest quality of raw materials available

Improves handling while cornering and over uneven roads

Reduces chassis flex

Distributes lateral load over both front strut towers

Fully loaded complete unit is safe and easy to install. Guranteed fit and function.

The strut is nitrogen gas charged with 4 Lip Teflon banded Piston Seal, micro polished chrome plated piston rod and all weather SV3 fluid.

Coil Spring is heated treated & powder coated to ensure longevity and protection from Corrosion.

The World's Best Complete Strut Assembly from the most trusted name in OEM quality shocks and struts

Designed for proper ride height and original handling capabilities on GM trucks

Exact fitment engineered and pre-assembled for professional results