Best 2 Ball Nose End Mills in 2026

5PCS Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge

1/8Inch Shank Diameter, 2 Flutes, TiAlN Coated for wear resistance

Ball Raidus 0.25MM, Flute Length:15MM, Overall Length: 1-1/2Inch, Single Side Angle 5.12°

Solid carbide spiral ball nose tapered router bit

2 flute, 1/4" shank, 1-1/4" cutting length, 0.5mm tip diameter, 5.2Deg, H-Si coating, 55HRC

Mostly used for 2D/3D engraving work, detail carving

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron

HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance

AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings

Material: Made of Tungsten Steel, highly wear resistance, high hardness, bending strength, highly working efficiency

Highly precision: With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left

Set of 12 different size: Cutting Size: 0.5mm, 0.8mm, 1mm, 1.2mm, 1.5mm, 1.6mm, 1.8mm, 2mm, 2.4mm, 2.5mm, 3mm, 3.175mm. Shank Size: diameter, about 3mm, length, about 22mm. 12 pcs different size for meeting your needs

0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs.

Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.

Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.

4 flute design for creating finer finishes and a higher metal removal rate

General purpose end mill for working on all types of materials

Made of extra-fine grade carbide for ultra high transverse rupture strength

High Quality: The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.

Cost-Effective: Specially designed for ultra-fine carving projects, including 4x tapered ball nose end mills, 4x single flute spiral end mills, 2x flat bottom carbide engraving bits. Shank Diameter: 3.175mm, Cutting diameter: 0.1 - 3.1mm (0.1, 0.2, 0.25, 0.5, 0.75, 1, 2, 3.1mm) , Overall Length: 38mm.

Versatile：Perfect for 3D relief sculpturing, cutting, engraving, slotting, milling, etc. Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.

Applicable Materials: ball mill bit usually used for steel（Carbon steel/Alloy steel/Hardened steel/Cast lron, etc.）

Ball End Mill Specification -- Cutting Diameter: 1 - 6MM（1mm 2mm 3mm 4mm 6mm），Shank Diameter:4 - 6MM（4mm 4mm 4mm 4mm 6mm），Cutting Length:2 - 12MM（2mm 4mm 6mm 8mm 12mm），Overall Length:50MM

Wide Compatibility: ball nose end mill set are compatible with most desktop CNC machines, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.

Top Quality: The End Mill Round Top with 2-Flute，Made from HRC55 Carbide with AlTiN Coated that is very tough, resists wear and offers high cutting performan;

AlTiN Coating: Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings;

Widely Application: Nano carbide ball nose Mill tools perfect for Hard Materials carbon steels , alloy steels , pre-hardened steels , hardened Steels, cast iron,Titanium Alloy, Graphite, plastic, composite material etc;

0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 diameter sizes of 0.5mm, 0.75mm, 1mm, 1.5mm, 2mm, 3mm, satisfy your different needs.

Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.

Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.

0.5-1.5mm Ball Nose Carbide End Mill: This end mill set includes 4 diameter sizes of 0.5mm, 0.75mm, 1mm, 1.5mm, satisfy your different needs.

Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.

Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.

【1】Package is 5pcs end mill 【2】Dimensions include: R0.5x2x4x50mm+R0.75x3x4x50mm+R1.0x4x4x50mm+R1.5x6x4x50mm+R2.0x8x4x50mm 【3】Material: solid carbide end mills;Bar: 0.3um granular tungsten steel 【4】Coating layer: NANO;For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability

【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc

【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining

Cutter Radius:1.0; Shank diameter:4mm ;Overall Length:50mm

Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45.

Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide.