Best Kemimoto Bike Cup Holders in 2026

Multifunctional cup holder could be used for stroller, wheelchair, walker, bike, scooter, armrest , trolleys , pushchair , lawnmowers , ATV, treadmill etc. Suitable for many objects with poles , such as golf cart , boat handle bar, motorcycle , beach chair etc.

Cup holder is adjustable and suitable for all the bottles, whose diameter less than 85mm / 3.4 in. It fits for baby bottles, water bottles, coffee mug, drink bottles, beverage cups etc.

The width of the clip can freely adjust from 0.55 in to 1.7 in . So the holder can be installed on different brands of strollers with rods 1.4 cm- 4.5 cm / 0.55 -1.7 in diameter .

Our stroller cup holder with phone holder fits for most strollers, walker, wheelchair, bike, scooter, boat handle bar, shopping cart, kayak, ATV, lawnmowers, motorcycle, treadmill etc.

This 2-in-1 stroller cup holder with a phone holder, it can load drink bottles and cell phones at the same time. You can see new messages, incoming calls in the first time when you are pushing a stroller or running on a treadmill. It is applicable to most mobile phones on the market.

The cup holder liner have flexible silicone petals, it secure the cup in place to prevent the beverage from moving and spilling. The cup holder fits for different sizes of cups and bottles.The open sides accommodate cups with handles, such as sippy cups, baby bottle with handle,coffee mug,drinks bottles etc.

This stroller cup holder designed to keep the cups secure and safe from spilling or falling off. With this bottle holder , your drinks will within your reach when you walking on the park or cycling outside.

Compatible with most baby strollers, bicycles, walker, wheelchair, scooter on the market.

The clip can be rotated 360 degrees. So it can be fitted on any angle. It can be fitted on handle bar, under seat, down tube, fork, front pipe.

【Wider Application】Kemimoto bike cup holders are designed to work well with vertical roll bar such as UTVs, Bicycle, Scooter, Wheelchair and boat. You can install the roll bar cup holder in any place with roll bar or square tube any time and get your drink easily with you.

【Fit Most Size of Bottle】KEMIMOTO bottle holder fits up to 32 OZ water bottles with locking drawstring design: UTV cup holder will hold up to 32 oz water bottle, soft drinks, coffee mug, or beer beverage. Locking the drawstring after putting your drink into the UTV cup holder to keep your bottle safe while riding.

【Hands Free】2 separated Mesh pockets and easy to get small items in Wheelchair cup holder: kemimoto drink holder is designed for holding your small items such as phone, MP3, sunglasses, key, card etc. You can get the small item easily while riding or pushing a wheelchair. In addition, foldable design is not necessary to take the wheelchair cup holder off when you fold the wheelchair.

🍶WIDE APPLICATION: The universal fit cup holder can be attached on anything with a 1.5’’ to 2.3’’ diameter roll bar.

🍶REINFORCEMENT STITCHING: The adjustable velcro straps are reinforced to hold the cup holder tight for tough road.

🍶MULTI-FUNCTION DESIGN: Not just a cup holder! It is also ideal to hold bottle, cell phone, wall charger and much more to make your item organized.

Multifunctional cup holder could be used for stroller, walker, wheelchair, bicycle , scooter, armrest , beach chair , lawnmower , ATV, treadmill etc.Suitable for many objects with poles , such as golf cart , boat handle bar, motorcycle , microphone stand, etc.

The flexible silicone insert can secure different size cups. And the open sides accommodate bottles with handles. This cup holder fits for sippy cups , baby bottles, water bottles, coffee mug, drink bottles, beverage cups etc.

The clamp designed with rubber pad, swivel allows 360 degree as well. So it can install on different angle as your need. The holder clip range is 0.55-1.7 in / 14 mm- 45 mm, the width of the clip can freely adjust and firmly clamp on the stroller rod to avoid sliding easily.

This W4W Cup Holder is built with super durable Plastic, designed with a silicone insert that expands to fit any size Beverage or Bottle .The heavy Duty clip expands to fit on most Baby strollers, Bicycle, wheelchair seat, microphone Stand, Golf Cart, Boat handle bar, Treadmill, Motorcycle, Beach Chair, walker, kayak, ATV, Scooters etc.

The clamp is wrapped with a Non Slip Silicone Grip to assure that the cupholder locks onto the device without movement. The 360° Technology allows the clamp to swivel at any angle, which makes it easy to attach to even the most oddly shaped objects. Such as a, Cane, umbrella, walkers, crib, desk, car seat, handlebar, Foldable seats etc.

This stroller cup Holder Measures 4”inches in diameter allowing it to fit from the smallest to the largest cups, the silicone Liner acts as a guard to secure the cup in place to prevent the beverage from moving and spilling. The unique design of this Holder is engineered to fit even the most awkward shaped cups, Like Coffee cups, infant baby bottles, Sippy cups, mini cup with handles, glass coke bottles and Yeti Cups. Also large enough to fit a Cell Phone, Snack or even a small Bluetooth speaker

【Upgraded Alligator Clamp】Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles.

【Easy to Install on 0.6"-1.5" Pole】The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.

【24oz Max Load Capacity】The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out.

Wide Application: Belinous drink holders are design to work well with vertical roll bars, such as UTVs, wheelchairs, walker rollators, and bicycles.

Various Compatibility: UTV cup holder will hold up to 32oz water bottles, soft drinks, tumblers, beer beverages, coffee mugs, or thermos cups.

Sturdy Strap Support: Two adjustable velcro straps can fit a 1.5"-2" roll bar. With anti-slip dot, it supports the weight and does not slide around.

Cup holder with Adjustable size: Fits cups up to 3.14inch. Fits mobile phone maximum thickness size (including case): 0.59in. Size of the pole to fit the cup holder clip: 0.55in-1.57in.

Non-slip design: the bike cup holder is made of safety and environmental protection materials and the surface is smooth to avoid scratches. Even walking on an bumpy road, It can prevent liquid from leaking out of the cup.

Stability: baby carriage cup holders have 4 elastic fastening strips that allow the baby bottle to be inserted and fastened to prevent excessive shaking and falling.

Wide range of uses: This cup holder with a mobile phone holder, (Not applicable for cups over 3.45 inches wide, mobile phones over 3.3 inches wide) is suitable for all kinds of baby bottles and coffee cup. This stroller cup holder is compatible with most strollers: uppababy, doona, nuna, Jogger, Britax, Bugaboo, etc...

Applicable scenarios: The stroller cup holder with mobile phone holder is suitable for most strollers, wonderfold wagon, walker, wheelchairs, bicycles, scooters, boat handles, shopping carts, kayaks, ATVs, lawn mowers, motorcycles, Treadmills, golf push cart, station wagons, etc.

Fixed cups: Inner of this bottle holder has soft silicone petals, which can fix the cup in place to prevent the beverage from moving and overflowing. The opening edge can accommodate cups with handles, such as baby bottles with handles, coffee cups, etc.

This bike cup holder fits for most bicycles, baby strollers, tricycles, scooters, walkers and wheelchair on the market. It is a great bike accessory for kids bike, road bike, mountain bike etc.

The clamp can be rotated 360 degrees. It can be fitted on bike handle bar, under seat, down tube, fork, front pipe.

This bike water bottle holders can hold most bottles. Suitable for water bottles, flask, coffee cups, drink bottles, beverage cans, baby bottles and so on.

Solid Metal Clamp: This motorcycle cup holder uses high quality metal clamps,increasing max weight and extended service life.Other cup holders with plastic mounting clamp in the market can not withstand higher pressure and can be easily broken.

Universal Compatibility: 0.6-1.75in Diameter range clamp design makes the drink holder used on ATV/motorcycle/bike/boat/wheelchair/stroller/walker/scooter/desk to meet your professional/daily needs.

Storage Capacity: The diameter of 2.8 inch and the maximum load capacity of 20oz can meet the needs of customers with different cup types like nursing bottle/beer bottle/Sports cup and so on. The cup holder doesn't take up too much space so it won't interfere with driving.

Have your drinks within your reach. Designed with your convenience in mind, this stroller drink holder allows you to have a secure place to put your coffee cup or water bottle on when you take your baby to the park or when you’re riding your bike. You can easily grab your drink when you need to refresh.

Prevents Spills. Securely holds your cup or bottle in place and keeps your drinks from spilling or falling off. Fits most cup, mug or water bottle sizes.

360-Degree Rotation. This drink holder can be rotated on a full 360 degrees so it can adjust on any angle. It’s compatible with most strollers and can be also be used on wheelchairs, trolleys, bikes or walkers.

Enjoy a Comfortable and Productive Ride. Designed with your convenience in mind, our innovative stroller drink holder provides a secure place to put your coffee cup or water bottle in when you’re out and about. It can be mounted on the handle bar or pole of your baby’s stroller or your bike so you can conveniently grab your drink when you need to refresh.Measure your Bottle or Cup before order.

Versatile Use. This drink holder can be rotated on a full 360 degrees allowing you to adjust its position at any angle. It’s compatible with most strollers and can also be used on bed railings, arm rests, trolleys, rollators, wheelchairs or walkers. Our stroller cup holder fits most coffee cup, soda can, travel mug or water bottle sizes.

Easy-to-Install. You can install the drink cup holder without need for tools or equipment. Clamp is fully adjustable so you can mount it on rods, pipes or tubes and locks tightly to keep your drink from spilling or tipping over.

【Increased Capacity】Our motorcycle cup holder bag has a height of 7.8 inches, allowing you to easily place large cups during your travels, and comes with a front pocket that is 5.5 inches high, enabling you to store small personal items.

【Aluminum Foil Lining】The upgraded aluminum foil liner makes cleaning this boat cup holder easy and helps to keep your drinks cold or hot for a short duration.

【Upgraded Alligator Clamp】Featuring a new alligator clamp design with two screws, one gasket, one rubber pad, and internal anti-scratch Velcro, our ATV cup holder is more stable and less likely to damage your cup or become loose.

Stay Hydrated On The Road - Easily grab your beverage while you are out cruising the open road. Our motorcycle drink holder securely attaches to handlebars and is able to fit standard water bottles.

A Snug, Secure Fit - Worried about your refreshment slipping out or falling off this motorcycle beverage holder? It's fitted with a foam insert that holds your drink securely in place while you ride.

Built For Year-Round Use - You can count on this motorbike, or ATV cup holder to last years. It is made of premium stainless steel which withstands the formation of rust, stains, or corrosion.

【Universal Applicable】Kemimoto motorcycle cup holder can multi-functionally fit mountain bicycles, road bikes, motorcycles, ATVs, scooters, boats, wheelchairs, walkers, strollers with 0.6-1.75 inches handlebar. One-handed operation is allowed while you're thirsty on a journey, makes you feel free at any time and anywhere.

【Superior Durability and Stronger Grip】Kemimoto cup holder made of a high-impact plastic housing is more durable and scratching-proof. And its heavy-duty metal clamp behind offers a stronger grip and load-bearing capacity, steadily preventing your drinks from spilling and falling down.

【Larger Capacity】Kemimoto ATV cup holder 12oz-28 oz with an adjustable bottom design can accommodate bottles with a maximum diameter of 3.5 inches. Universally suitable with water bottles, drink bottles, coffee mugs, and beverage cans, etc. Easily meets your diverse needs at any time. Compatible with 18/21/24oz Hydro Flasks, 12/18/26oz Yeti, 16/20/24oz Nalgene, Camelbak, Tervis, and so on.

This walker cup holder can be rotated 360 degrees. It can be fitted on handle bar, under seat, down tube, fork, front pipe. Can be used on most walkers, wheelchairs, rollator,scooters etc.

The clip is adjustable from 0.59in to 1.57in. It is a "clip on" cup holder. Can be easily clipped in a place where you can easily reach the water bottle.

Designed to keep the cup secure and safe from spills. The bottle organizer diameter is 7cm~8cm/2.76in~3.15in. You can put different drink bottles, coffee cups, travel mugs etc.

【Easy-to-Install】- Easy use and install or remove without any tools.

【Versatile Use】- It’s compatible with most baby strollers and can also be used on bikes, bicycles, wheelchairs, trolleys, walkers, tricycles, scooters on the market.

【360º Rotation】- With its 360 degrees rotation design, you can adjust the cup holder to any angle you want, it can be mounted on handle bar, under seat, down tube, fork, front pipe.

Our stroller cup holder with phone holder fits for most strollers, walker, wheelchair, bike, scooter, boat handle bar, shopping cart, kayak, ATV, lawnmowers, motorcycle, treadmill etc.

Phone storage box: cup holder for walker has a mobile phone storage box that allows you to rest the phone and release both hands.

The cup holder liner have flexible silicone petals, it secure the cup in place to prevent the beverage from moving and spilling. The cup holder fits for different sizes of cups and bottles.The open sides accommodate cups with handles, such as sippy cups, baby bottle with handle,coffee mug,drinks bottles etc.

UNIVERSAL CUP HOLDER. When you’re out for a stroll, riding your bike or simply enjoying the fresh air, it’s convenient to always have a drink at hand. This cup holder mounts onto a 1-inch tube frame, easily clipping onto most walkers, wheelchairs, bicycles, transport chairs and bed rails so you can enjoy your beverage whether you’re indoors or out.

COMPACT SIZE. Measuring 4.5” x 8” x 1” and weighing less than half a pound, the AdirMed won’t add cumbersome weight or bulk to the product it’s attached to. Despite it’s lightweight, compact design, the universal holder is expertly crafted using molded plastic to provide long-lasting strength and use.

ADJUSTABLE CONVENIENCE. Whether you drink coffee, water, soda or juice, this universal holder can accommodate your beverage of choice. The grip adjusts to any sized beverage from 2.35" to 3.95" in diameter, making it suitable for holding a cup, bottle, thermos or can.

WHAT’S INCLUDED: Set includes 2 universal cup holders for strollers, joggers or bikes

FITS ALMOST ANY STROLLER (OR BIKE): Compatible with most baby strollers, including: Delta Children, Jeep, Chicco, Britax, Peg Perego, City Mini, UPPAbaby, Graco, Summer Infant, Kolocraft and more | Also attaches to bikes, golf carts, shopping carts and more

EASY TO ATTACH: Adjustable clamp allows you to securely attach the cup holder to any handle bar

【Lovely Chick Design】With the unique chick appearance looking cute and charming, our stroller phone holder made of soft food-grade silicone material is not only suitable for water glasses of various sizes but also will not scratch the items or make any noise during usage.

【Anti-Slip Strap】The stroller caddy cup strap comes with anti-slip design, so there is no need to worry about the strap will slide around, providing easy and secure attachment to your stroller.

【Hangings Bottom Ring】Designed with a small ring at the bottom, the cup holder allows hanging baby toys to help comfort and distract your baby. You could also hang your keychain or other pendants on the ring just to add more charm to this cup holder.

Phone And Cup Holder : This is a multifunctional cup holder for walker and at the same time a phone holder. Lets you use your phone, take videos, face time, or watch videos while strolling.

Easy Installation: This stroller accessories has a knob to easily attach, simply twist the knob to hold it tight, and no tools are required. It has a clamp where you can attach your phone securely.

Scratch-Free Materials: This wheelchair accessories is made of soft materials to keep your stroller, wheelchair, or bike from being scratched. The phone holder is also made of soft materials to hold your phone scratch-free.

MULTIFUNCTIONAL - an item used in many situations while working from home, while out camping, in the car, on a boat, with your bike, scooter, motorcycle, at your desk, on your chair, on your stroller, on the wall, with your camera.

SPACE SAVING - with its folding design, helps you save space and be used when is no more space on your desk. Holds cups, glasses, bottles, phone, headphone, headsets, small food bytes;

ADJUSTABLE - can be adjusted in many positions to be convenient for your use. SECURE tight all the adjustable parts before use, for a perfect experience and do not overload it;

【Universal Compatibility】Phone Holder and Cup Holder can be used on ATV/motorcycle/bike/boat/wheelchair/stroller/walker/scooter/desk to meet your professional/daily needs.

【Phone Holder - Free Rotation】Lossing the locking kit, you can adjust the UTV Phone Holder 720° freely, rotate the phone screen to the perfect place and angle, making you navigate, play music, pick up phones, and do some other phone work conviently.

【Phone Holder - Wide Application】ATV Phone Holder has powerful and adjustable clamps, which can be pulled to fit phones and tablets with width/length 4.7"-13" and thickness within 0.7", fit most phones, tablets, and navigators.

【Stretchable Cup Mouth】: It is suitable for baby bottles, water bottles, coffee cups, beverage bottles, beverage cups, etc. The cup's mouth can be stretched, easily broken, and easily loaded with water cups, etc.

【Detachable Design】: Detachable design, put the clamp into the cup holder to save space and facilitate storage, which is convenient for carrying and storage.

【 Clip】: The clip clamps firmly on the cart stem to prevent slipping and ensure the cup stays stable even on rough roads.

【Credit Card for Quick Measurement】Thanks to the size of the credit card is regulated, you can use it to quickly measure your large water bottle and car cup holder insert are fit our cup holder extender or not, which obtain the best using experience.

【Hold Most Bottles of Popular Brand】The car cup holder adapter can hold most 18-40 OZ bottles, cups or mugs, which is compatible with Yeti 20-36oz, Hydro Flask 32 40oz, Nalgene 16-40oz, Camelbak 32 40oz, Contigo, Tervis, etc.

【Adjustable Straps for Wider Adaptability】The ratchet straps will keep the bicicletas frame in its cradle. The 360°rotating cradle and 3.2'' spacing will adapt most bikes' frames and prevent your bike from scratching each other.