Best Kemimoto Car Cup Holders in 2026

【Wider Application】Kemimoto bike cup holders are designed to work well with vertical roll bar such as UTVs, Bicycle, Scooter, Wheelchair and boat. You can install the roll bar cup holder in any place with roll bar or square tube any time and get your drink easily with you.

【Fit Most Size of Bottle】KEMIMOTO bottle holder fits up to 32 OZ water bottles with locking drawstring design: UTV cup holder will hold up to 32 oz water bottle, soft drinks, coffee mug, or beer beverage. Locking the drawstring after putting your drink into the UTV cup holder to keep your bottle safe while riding.

【Hands Free】2 separated Mesh pockets and easy to get small items in Wheelchair cup holder: kemimoto drink holder is designed for holding your small items such as phone, MP3, sunglasses, key, card etc. You can get the small item easily while riding or pushing a wheelchair. In addition, foldable design is not necessary to take the wheelchair cup holder off when you fold the wheelchair.

UPGRADE VERSION: Seven Sparta Newest cup holder expander uses a Offsetting Base to avoid the lack of space , two cup holders can be used side by side. Compatible with the gear shifter, center console lid, car dash and other center console buttons.

FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES & MUGS IN 3.4"-4": Car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and mugs in 3.4"-4" diameter.

EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Car cup holder adapter comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts.

EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Seven Sparta car drink cup holder comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts. (Vehicles Not Recommended: Rav4, Mini)

FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES AND DIAMETER 3.4"-3.8": The car drink cup holder is big enough for oversized thermoses, it also can work with most popular brands bottles and many large fast food cups in 3.4"-3.8" diameter. (not fit for Rambler 14 oz Mug)

SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car cup holder built with solid and thick plastic and the rubber tabs around the top of the cup holder hold the cup firmly in place without tipping or spilling when driving down the road.

EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Seven Sparta car drink cup holder comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts. (Vehicles Not Recommended: Rav4, Mini)

SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car cup holder built with solid and thick plastic and the rubber tabs around the top of the cup holder hold the cup firmly in place without tipping or spilling when driving down the road.

FIT MOST 32 OZ. - 40 OZ. LARGE BOTTLES & DIAMETER 3.4"-3.8": This car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and many large fast food cups in 3.4"-3.8" diameter. (not fit for Rambler 14 oz Mug)

【Upgraded Alligator Clamp】Compared with the old style, kemimoto motorcycle cup holder has upgraded the 90°adjustable alligator clamp increased from 1 screw to 2 screws, and add a cross-mounting hole design, which is more sturdy, better load-bearing, and will not loosen or spin. Get rid of the trouble of falling off and loosening when riding at high speed and spinning when holding large-capacity water bottles.

【Easy to Install on 0.6"-1.5" Pole】The alligator clamp of this kayak cup holder fits 0.6"-1.5" diameter handlebars/pole, please confirm the diameter of your handlebar/pole before purchasing. And it is easy to install and remove with a hand screw design.

【24oz Max Load Capacity】The maximum cup capacity can reach 24oz, please note that the bottom diameter of the scooter cup holder is 3.94 in. With a drain at the bottom of cup holder to keep the water out.

【Upgraded Compatibility】The upgraded car drink holder expander ensures a more secure fit in a wider variety of automobile cup holders. The SHORT BASE is optimized for cylindrical cup holders between 2.75 and 3.25 inches in diameter and the LONG BASE can fit into a square or recessed cup holder. Please confirm which model will fit best for you.

【Wider Compatibility】The car cup adapter can hold most 18-40 OZ water bottles or coffee mugs, which is compatible with Yeti 20-36oz, Hydroflask 32 40oz, Nalgene 16-40oz, Camelbak 32 40oz, Contigo, Tervis, etc.

【Anti-vibration Rubber Base Maintain Steady】The sturdy rubber base of the car cup holder extender guarantees a secure fit with the console cup holder, and the whole process takes just a few seconds and no additional effort or tools.

Solid Metal Clamp: This motorcycle cup holder uses high quality metal clamps,increasing max weight and extended service life.Other cup holders with plastic mounting clamp in the market can not withstand higher pressure and can be easily broken.

Universal Compatibility: 0.6-1.75in Diameter range clamp design makes the drink holder used on ATV/motorcycle/bike/boat/wheelchair/stroller/walker/scooter/desk to meet your professional/daily needs.

Storage Capacity: The diameter of 2.8 inch and the maximum load capacity of 20oz can meet the needs of customers with different cup types like nursing bottle/beer bottle/Sports cup and so on. The cup holder doesn't take up too much space so it won't interfere with driving.

【Increased Capacity】Our motorcycle cup holder bag has a height of 7.8 inches, allowing you to easily place large cups during your travels, and comes with a front pocket that is 5.5 inches high, enabling you to store small personal items.

【Aluminum Foil Lining】The upgraded aluminum foil liner makes cleaning this boat cup holder easy and helps to keep your drinks cold or hot for a short duration.

【Upgraded Alligator Clamp】Featuring a new alligator clamp design with two screws, one gasket, one rubber pad, and internal anti-scratch Velcro, our ATV cup holder is more stable and less likely to damage your cup or become loose.

【Upgraded Compatibility】The upgraded cup holder expander ensures a more secure fit in a wider variety of automobile cup holders. The SHORT BASE is optimized for cylindrical cup holders between 2.75 and 3.25 inches in diameter and the LONG BASE can fit into a square or recessed cup holder. Please confirm which model will fit best for you.

【Wider Compatibility】The car cup adapter can hold most 18-40 OZ water bottles or coffee mugs, which is compatible with Yeti 20-36oz, Hydroflask 32 40oz, Nalgene 16-40oz, Camelbak 32 40oz, Contigo, Tervis, etc.

【Anti-vibration Rubber Base Maintain Steady】The sturdy rubber base of the car cup holder extender guarantees a secure fit with the console cup holder, and the whole process takes just a few seconds and no additional effort or tools.

【Universal Applicable】Kemimoto motorcycle cup holder can multi-functionally fit mountain bicycles, road bikes, motorcycles, ATVs, scooters, boats, wheelchairs, walkers, strollers with 0.6-1.75 inches handlebar. One-handed operation is allowed while you're thirsty on a journey, makes you feel free at any time and anywhere.

【Superior Durability and Stronger Grip】Kemimoto cup holder made of a high-impact plastic housing is more durable and scratching-proof. And its heavy-duty metal clamp behind offers a stronger grip and load-bearing capacity, steadily preventing your drinks from spilling and falling down.

【Larger Capacity】Kemimoto ATV cup holder 12oz-28 oz with an adjustable bottom design can accommodate bottles with a maximum diameter of 3.5 inches. Universally suitable with water bottles, drink bottles, coffee mugs, and beverage cans, etc. Easily meets your diverse needs at any time. Compatible with 18/21/24oz Hydro Flasks, 12/18/26oz Yeti, 16/20/24oz Nalgene, Camelbak, Tervis, and so on.

【Unique Adjustable Elastic Tab】Compared with a normal cup holder expander, kemimoto cupholder expansion not only has wider adaptability but also will hold your big size cups stably. The car cup adapter can hold 2.4"-3.7" diameter or 8-40 OZ bottles, cups, mugs, etc.

【Vibra Resistance Rubber Base】 The solid rubber base is used to ensure that the car drink holder adapter firmly adapt to the console cup holder. It will fit regular round shape cup holder insert with diameter of 2.75-3.25 inches, which is compatible with most vehicles, RVs, Jeeps, golf carts, UTVs, etc.

【Easy to Use & Install】Constructed by a one-piece water bottle adapter, just plug in and complete the installation, no need for any tools and worried about falling apart. In addition, the rubber tabs around the top can be removed when you use a large size cup.

【Upgraded Compatibility】The upgraded cup holder expander ensures a more secure fit in a wider variety of automobile cup holders. The SHORT BASE is optimized for cylindrical cup holders between 2.75 and 3.25 inches in diameter and the LONG BASE can fit into a square or recessed cup holder. Please confirm which model will fit best for you.

【Credit Card for Quick Measurement】Thanks to the size of the credit card is regulated, you can use it to quickly measure your large water bottle and car cup holder insert are fit our cup holder extender or not, which obtain the best using experience.

【Hold Most Bottles of Popular Brand】The car cup holder adapter can hold most 18-40 OZ bottles, cups or mugs, which is compatible with Yeti 20-36oz, Hydro Flask 32 40oz, Nalgene 16-40oz, Camelbak 32 40oz, Contigo, Tervis, etc.

【Wide Suitablity】The motorcycle cup holders with perch mounts are compatible with All '82-up Softail / Dyna / Heritage / Touring / Trike Models clutch or brake perch mounts (except '14-up Street Models), All Goldwing GL1800 / Goldwing GL1500 / VTX1300 / VTX 1800 / Shadow 750 / Shadow 1100 Models, '14-up Valkyrie , All Vulcan 900 / Vulcan 1500 / Vulcan 1600 including Mean Streak / Vulcan 2000 Models, All Road Star / Warrior / Vstar / Venture / Bolt / Stryker Models.

【360-Degree Swivel Ball Design】The leather motorcycle cup holder with adjustable ball mount base provides the possibility to adjust the angle as you need. You could adjust the angel to not contact the gas tanks when your motorcycles turn left or right.

【Hold Your Drink Firmly & Steady】KEMIMOTO motorcycle cup holder finger-like rubber gears can keep your drink securely, and you don't need to be afraid that the vibration causes a spill as long as the diameter of your drinks ranges from 1.97 to 3.15 inches.

【Easy Installation】The install location of this drink holder is on the dashboard. All you need is to drill 4 holes for each one in the pre-marked spots and complete the installation in a few minutes.

【Wide Adaptability】The cup holder can hold bottles or cups within a diameter of 85mm.

【Extra Storage Area】The cup holder provides a reachable place to put your stuff needed in a ride, such as cups, bottles, cellphones, gloves, sunglasses, etc.

【Keep Drinks Safe and Stable】The perfect anti-spill drinks holder has amazing suction power. The suction cup attaches easily and actually stays in place. The kemimoto boat cup holder has passed rigorous testing and can withstand a weight of 4 pounds without falling. You don't have to be concerned about your beverages spilling.

【Durable Desk Cup Holder】Premium-quality solid plastic makes this cup can holder both sturdy and washable. (It's best to let the sticky pad dry up completely before use).Don't worry about rust and fragility anymore. The strong glue on the bottom can ensure maximum strength and durability. Plus, reusable and environment-friendly, it won't leave any residue.

【Suitable for All Beverages】Our car boat drink holder is suitable for water bottles or beverage cups with a diameter of 1.37"-2.95", and can also be used for most beverage cups within 20 oz. Thanks to replaceable rubber parts and a tongue depressor, the black suction cup holder adjusts in size to carry your coffee, cola, juice, beverage, beer, etc.

【Upgraded Adjustable Base】：Upgraded cup holder expander for car has an adjustable base. Car cup holder expander has a retractable function can firmly clamp your items. Car cup holder to prevent items from moving and spilling while driving, so that your car stays tidy at all times. The cup holder shaft can be rotated 360°, turning one cup slot into two, which can store two beverages at the same time, increasing space utilization for you.This cup holder for car fit different vehicles.

【2 in 1 Multifunctional Design】:The water bottle holder for car is enough to hold the bottles in daily use. The bottom cup holder fits hydroflask, and beverage bottles/cups up to 3.74 inches in diameter. The upper cup holder adapter has a diameter of 2.36, cup holder for car can be extended from 2.36-5.35 inches , which can hold phones, ipad, and food like fried chicken and instant noodles but is not recommended for the heavy bottles.

【360° Arbitrary rotation】:Multifunctional Car Cups Holder Made of strong ABS & eco-friendly. The upper part of 2 in 1 car cup holder expander adapter has the function of stretching and shrinking, which can accommodate the stacking of larger objects and can be rotated 360 degrees, and the overall structure of the lower part is relatively stable! All purpose car cup holder store cell phones, drinks, water cups, coffee and ipad to make most of the space in the car.

【 Fitment 】 Garb bar cup holder compatible with 2008-2015 2016 2017 2018 2019 2020 Polaris RZR 570 / 570 S / 800 / 800 S / 4 800 / 900 / 900 XC / S 900 / 4 900 / S 1000 / S4 1000 / XP 1000 / XP 4 1000 / XP Turbo / XP 4 Turbo / XP Turbo S / XP 4 Turbo S / Trail / Trail S 900 / Trail S 1000. The package includes M8 screws and nuts needed for installation.

【 Designed for Large Containers 】 The passenger grab handle cup holder can hold most 18-40 OZ water bottles, which is compatible with Yeti 20-36oz, Hydroflask 32 40oz, Nalgene 16-40oz, Camelbak 32 40oz, Contigo, Tervis, etc.

【 RUBBER PROTECTION RINGS 】 The cup holder's rubber protection makes it possible to keep the bottle safe from damage. Dazzling exterior design make your RZR more stylish and unique, which aesthetically maintains the elegant style.

【cup holder expander for car】The cup holder is made of ABS material, weighs about 0.9 pounds, has a height of about 8.58 inches, and a diameter of about 4 inches. The material has been upgraded to be sturdy and durable.

【car cup holder expander】 According to different size requirements, we have designed a car cup holder with an adjustable mouth size ranging from 3 inches to 6.2 inches, which can hold various sizes of cups, coffee, drinks, lunch boxes, fried chicken buckets, etc. It is compatible with Hydroflask 32/40oz, YETI 20/36oz, Nalgene 16-48oz, YETI Rambler 10/46oz, etc. With it, you are no longer limited to only one cup size, providing a new experience.

【car cup holder Stability】The support height of the car cup holder extender is designed to be 2.36 inches with an adjustable base, and the inner wall of the support is equipped with a rubber pad to enhance the stability of the cup holder extender when accelerating and turning while driving, making it less likely to slip. The increased height allows for stable use of taller cups as well.

【Strong Stability】The cup holder has 4 built-in petal pads and 2 bottom pads to prevent slippage. The cup holder's tight grip relieves any worry that the bumps on the golf course may cause your cup to fall.

【2 in 1 Large Capacity】Cup holder storage box has a two-in-one design. The cup holder part can hold 18-40oz cups and the large storage box part can carry 3KG. Furthermore, the cup holder has an opening design to accommodate mugs with handles. Easy to handle!

【Solid Material】Golf cart holder has 3 layers of solid ABS structure dampens vibrations, a thickened pipe clamp section prevents cracks from forming under stress, and a snap-together design keeps the product together when on bumpy road.

1.Adjustable base cup holder: The cup holder expander for car is designed with an adjustable base that can fit in almost any car's cup holder, making it an essential accessory for any vehicle owner.

2.Three-in-one cup holder: With its three-in-one design, this cup holder expander can hold multiple coffee cups and beverages, large water bottles, and even be used as a meal tray, making it a versatile accessory for any driver.

3.Durable and Sturdy: Made of ABS material, this cup holder expander is designed to withstand the wear and tear of daily use. It can hold up to 6.6 pounds of weight, making it a reliable and sturdy option for your car.

Perfect Fit - The UTV cup holder compatible with 2011-2020 2021 2022 2023 Polaris RZR XP 1000/ XP 4 1000/ XP 4 900/ XP 900, RZR 900/ RZR XP 900/RZR 800 /RZR S 800/ RZR 4 800/ Ranger XP 900/ Ranger XP 1000, Slingshot.

Decorate your RZR - kemimoto cup holder to make your RZR more stylish and unique, which aesthetically maintains the elegant style and matches your car interior trim.

High Quality Material - The cup holder for RZR is made of CNC aluminum, with a surface-resisting float process for the lid that is effective in preventing scraping. Long lasting and will never rust, peel or corrode.

Adjustable & Stable Alligator Clamp- Kemimoto boat cup holder with a 360°adjustable high-quality aluminum mounting clamps, clamp firmly on the rails of your boats and side tables, have an impressive grip that won't slip, securely hold your drinks and cups. Easy to install and use. With a skid-proof pad, this kayak cup holder will be more stable and protect the rails. Stable without sliding for 0.6-1.75" rails and vertical bar.

With Tightening Drawstring- adjustable drawstring design for almost kinds of cups and water bottles. Perfectly hold your 12-24oz cans of beer, large cups, coffee mug, soft drinks, stainless steel bottle, fit YETI cup, RTIC cup.

2 Separated Mesh Pockets- Designed for holding your phone, mp3, key, sunglasses, card fishing bait etc. Help you storage the little things.

【Fit Most 18-32 oz Cup】Designed with a large room for 18-32 oz bottles and extra space to store all your small items needed outdoors, and specially designed recesses for travel mugs. Which can not only hold water cups but also small items such as sunglasses, phones, and rangefinders.

【Easy to Install in Three Angles】Surprisingly the pipe clamp can be adjusted at three angles for installation, suitable for vertical, horizontal, and sloping railings, and most suitable for square pipes with a diameter of 0.5"-1.5" inches. Equipped with an anti-slip rubber interior, your cups can keep the level stable no matter where in any case.

Granular textured non-slip surface】Excellent Granular textured design increases friction and prevents items in the dash liner from being thrown out during the steering process, the unique edge texture design adds a premium feel to your golf cart.

【Greater Capacity】Height increase and come with storage bag, kemimoto bar cup holder make it convenient to place large cups and small objects on your trip.

【Aluminum Foil】Upgraded aluminum foil liner makes it easy to clean this boat cup holder and keeps your drinks cold or hot temporarily.

【Easy to install】Thumbscrew design, kemimoto boat mirror design with 3 thumbscrews, it is absolutely convenient for you to install on your windshield frame without use tools.

【 Maximize Bed Space】kemimoto bed box is designed for maximum storage space with a heavy-duty lid for extra durability. It's a great box for some snacks, few tools, and gloves etc.

【Weather Resistance】Waterproof rubber ring design, good sealing performance. The angle of opening can only be a certain range, the design of the lid make storage box not fall down.

【Wider Compatibility】The car cup adapter can hold most 18-40 OZ water bottles or coffee mugs. The expandable cup holder fits standard round shape car cup holders with a diameter of 2.75-3.25 inches, is compatible with most automotives, vehicles, UTVs, golf varts, RVs, Jeeps, trucks, etc.

【Universal Compatibility】Phone Holder and Cup Holder can be used on ATV/motorcycle/bike/boat/wheelchair/stroller/walker/scooter/desk to meet your professional/daily needs.

【Phone Holder - Free Rotation】Lossing the locking kit, you can adjust the UTV Phone Holder 720° freely, rotate the phone screen to the perfect place and angle, making you navigate, play music, pick up phones, and do some other phone work conviently.

【Phone Holder - Wide Application】ATV Phone Holder has powerful and adjustable clamps, which can be pulled to fit phones and tablets with width/length 4.7"-13" and thickness within 0.7", fit most phones, tablets, and navigators.