Best Hybrid Bike Hubs in 2026

Made of Iron, durable and practical for most bikes

Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel.

Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 16cm / 6.3"

Reliable and Sturdy: these wheel axle nuts are made of steel, hard to deform, bend or break, not easy to rust, smooth and bright on surface, with clear and neat thread, without burrs or pointed edges, delicate and serviceable, with a long service life

What's Included: the package contains 2 pieces of M 9.5 bike nuts, 2 pieces of M 8 bike nuts, 2 pieces of M 10 bike nuts, 4 pieces of bike axle washers about 10 mm/ 0.39 inch, 2 pieces of bike axle washers approx. 8.5 mm/ 0.33 inch, various in sizes and sufficient in quantity, enough to meet your replacement needs of bicycle parts

Size Information: this M 8 flange nut is about 0.6 inch in overall width, 0.31 inch in inner diameter, 0.24 inch high, matching with safety washer approx. 0.33 inch, suitable for bicycle front axle; The M 9.5 nut is about 0.71 inch wide, 0.4 inch in inner diameter, 0.6 inch high, with safety washer about 0.39 inch, nice for bike rear axle, and the M 10 nut is about 0.71 inch in overall width, 0.4 inch in inner diameter, 0.28 inch high, with safety washer about 0.39 inch, nice for middle axle

It is made of high strength steel with antirust treatment

Includes 2 M 9.5 bike nuts, 2 M10 bike nuts, 2 M 8 bike nuts, 4 bike axle washers approx. 10 mm / 0.4 in, 2 Bike axle washers approx. 8.5 mm / 0.3 in suitable for most bicycle replacements

Spec: M8 flange nuts are approximately 0.6 inches wide, 0.3 inches in inner diameter and 0.24 inches high, matching safety washers approximately 0.33 inches for bicycle front axles; M9.5 nuts are about 0.71 inches wide, 0.4 inches inside and 0.6 inches high, with safety washers, about 0.39 inches, suitable for bicycle rear axle use, M10 nuts are about 0.7 inches wide, 0.4 inches inside diameter, 0.28 inches high with safety washers, suitable for the center axle

The new updated Road Mountain Cycling parts are made of Steel 1045, the quick release are made of alum, durable and practical for most bikes.

Usually the axels fit 20" 22" 24" 26" 28" bike, work on a 6 7 8 speed road bike, durable and extra hard dustproof cap, the thickness: 65 degrees, 2.4mm / 0.09inch.

The long release lever for the rear wheel, hollow shaft size: approx. 5.7", diameter: approx. 0.35", quick release: approx. 7.48"

Material: The MTB wheel axle made of high quality iron, durable and can be used for a long time.

Quick Release: The wheel equipped with a quick release mechanism, which can be removed from the frame for replacement without the use of tools. Easy to use and labor saving.

Application range: Usually the axles fit 20" 22" 24" 26" 28" bike, work on a 6 7 8 speed road bike.

【Material】Made of high-quality iron, durable and strong, suitable for most bicycles.

【Front Size】Short release lever for front wheel, hollow shaft size: approx.10.8cm / 4.25in, quick release: approx.15cm / 5.91in

【Rear Size】Long release lever for the rear wheel, hollow shaft size:14.5cm / 5.71in, quick release approx. 19cm / 7.48in.

Double contact sealing

Super polished bearing races for low friction rolling

Angular contact bearings

Double contact seals

Borozon treated races

MATERIAL - Made of premium quality iron and aluminum alloy, it is ultralight, durable, rugged, high strength and practical for most bikes.

USAGE - Shorter set of hollow shaft and hub quick release lever for the front wheel, longer one for the rear wheel.

SIZE - Short release lever for front wheel, hollow shaft size: 10.8cm / 4.25", quick release: 15cm / 5.9". Long release lever for the rear wheel, hollow shaft size: 14.5cm / 5.7", quick release: 18cm / 7.1".

Double contact sealing

Super polished bearing races for low friction rolling

6-bolt ISO disc mounting surface

Assorted Types and Sizes: these bike nuts come in 3 different types, which contain M10, M9.5 and M8, giving you multiple choices, and you can choose them according to your actual needs; And these bike axle washers are designed in 2 different sizes, including M10 and M8, meet your assorted demands

Precise Dimension: these bike safety washers measure approx. 8 mm in inner diameter, 19 mm in out diameter, and 26 mm in length, their hooks are measured approx. 4.69 mm in width, 6.9 mm in height and 2 mm in thickness; And another bike axle washer measure approx. 10.9 mm in inner diameter, 18.7 mm in out diameter, and 26 mm in length, their hooks are measured approx. 4.69 mm in width, 6.9 mm in height and 1.8 mm in thickness

Adequate Quantity to Meet Your Needs: you will receive 24 pieces of bike wheel nuts and 24 pieces of bike axle washers, 48 pieces in all, adequate quantity can meet your daily use and replacement demands, which allow you to replace your old one or broken one, and you can share them with your friends, relatives, colleagues and more

Bicycle Wheel Part Rear Hub 36 Hole,Rear Width 135mm,Alloy Alum Bike Hub

338g/0.75 lb; Thread:3/8　

Compatible with rotary fly wheel 21/24 Speed

Bike Bicycle Fittings 36 Holes Metal Disc Rear Hub Set

[Premium Material]: Made of quality Aluminium Alloy materials, high strength, anti-rust, non-deformation and durable

[Fine Workmanship]: Alloy forged and CNC machining makes the surface smooth and can prevent abrasion damage

[Specification]: Bike hub conversion with this adapters, you can change 100*15mm front hun into 110*15mm, and 142*12mm rear hub into 148*12mm (Optional)

Package includes: 2 x Bicycle Wheel Hub Nuts

Made of aluminum alloy material, it is light weight and high strength. Easy to install and durable

Size: M5; Out diameter: 19mm; Height: 16mm; Color: Black

Double contact sealing

Super polished bearing races for low friction rolling

This is 32hole Black 9x100mm Quick Release (QR) Front hub & 10x135mm Quick Release (QR) Rear hub. Compatible with Shimano 8-11speed & Sram 8-10 speed.

The classic 6 pawls / 72 hd freehub system. High efficiency and great sounds transmission. Whatever ride on the street or offroad, you can be passionate

All Aluminum Alloy CNC Precision Technology Disc Brake, super light, J-hook stable, durable

Track hub

Fixed gear high flange

Spacing 100mm Frt / 120mm Rear

Used to replace electric bike hub motor nuts, usually for 750W-1500W motors with 14mm shaft.

The motor screws are made of steel and rubber materials, which are very durable.

E-Bike hub motor screw nut fit for most bicycle replecement, electric bike, scooter, e-bike, etc.

Bore Dia (d): 17mm Outer Dia (D): 30mm Width (B): 7mm

Material: Chrome Steel / Si3N4 Balls

Compared With Steel Ball Bearing,Hybrid Ceramic Ball Bearing Has Long Service Life,Higher Speeds,Durable & Insulation

Contains front and rear quick-release hubs and quick-release skewers, easy to install, suitable for disc brake mountain bikes.

Spoke holes: 36 holes. O.L.D.: front 100mm/ rear 135mm. Axle diameter: front 9mm/ rear 10mm. Sealed bearings: front 2/ rear 4.

Axle material: aluminum alloy. Cassette body material: CrMo steel. Weight: front (259g/0.57lb)/ rear (547g/1.2lb); a Pair (806g/1.78lb).

Internal Details： With 32 holes, 6 Bolt Disc Brake, high efficiency, smooth and good rolling performance, 120 clicks, let you experience riding smooth, fast and full of passion.

Durable Material：The thru-axle hub is made of 7075 aluminum alloy, which is light in weight, high in strength, has strong corrosion resistance and rust resistance, and is durable and not easy to deform.

Hub Size: Front hub 15x110mm, rear hub 12x148mm, front 2 rear 4 sealed 6062 bearing, low friction, strong sealing, can effectively prevent cement and dirt.

1. Size : 6000 10*26*8mm(0.39*1.02*0.31inch); 6001 12*28*8mm(0.47*1.10*0.31inch); 6802 15*24*5mm(0.59*0.94*0.19inch); 6803 17*26*5mm(0.66*1.02*0.19inch); 6900 10*22*6mm(0.39*0.86*0.23inch); 6901 12*24*6mm(0.47*0.94*0.23inch); 6902 15*28*7mm(0.59*1.10*0.27inch); 6903 17*30*7mm(0.66*1.18*0.27inch); 15267 15*26*7mm(0.59*1.02*0.27inch); 15268 15*26*8mm(0.59*1.02*0.31inch); different sizes for your choice.<br>

2. The rotation speed is high, the ceramic ball has oil-free self-lubricating performance, and the friction coefficient of the ceramic ball is small, so the rotation speed of the ceramic ball bearing is more than 1.5 times.

3. Long service life, ceramic balls can be used without any grease, and the service life is 2-7 times that of ordinary bearings.

DT Swiss Service / Upgrade Kit for star ratchet hubs 24 teeth Hybrid

Model Number: HBDT978

Item Package Quantity: 1

🚴【36 Holes Wheel Hub】The Bicycle fittings has 36 round holes for spokes assembling, is a universal bike bicycle rear wheel hub.Rear wheel hub is easy for installing to the freewheel with the screw end nutted axle design.

🚴【LONG SERVICE LIFE】Rear wheel hub is a free hub, which integrates a freewheel mechanism and a hub, features both compact size and light weight, made it easier to replace sprockets, and increased the rigidity and durability of axles.

🚴【Universal Rear Wheel Hub】Universal bike bicycle 36 holes rear wheel hub has the advantage of high quality, stable, durable and has a long service life, easy to assemble, you only need to spend a little time to complete the replacement

Steel rear skewer

Compatible with mountain bike or hybrid bicycle with 135mm rear spacing

DT Swiss

350 Hybrid Rear Hub

Rear Hub