Best Tektro Bike Rim Brake Sets in 2026

R55C4 padsAluminum pad holder

Forged alloy calipers are strong and lightweight

SRAM Dual-Pivot design provides powerful stopping power

Sleek, Jet Black gloss finish compliments any bike

Efficient design with low operating Forces

Designed for smooth and quiet stopping power

107 mm arch

2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions

Size: the road brake pad is about 50 mm/ 1.97 inch in length; Each piece has a nut and a spacer, it's easy to remove and install with the tool

V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability

Item Package Dimensions: 17.78 L X 10.414 W X 1.777 H (Cm)

Product Type: Vehicle Brake Pad

Item Package Weight: 0.050 Pounds

102mm arm length

158g per pair

sport type: Cycling

Efficient design with low operating forces

Designed for smooth and quiet stopping power

107 mm arch

Carbotecture Enclosure

Ergonomic 1-finger HC brake lever made of aluminium.

Forged 4-piston brake caliper with banjo

✅Bike V-Brake Kit : The Package Contaion V-Brake Kit with 4 Pcs V brake pad ,2 sets of bolt screws.

✅Strong Brake Arm Size : 110mm long Aluminum Alloy, Durable and Reliable.Fit with most V-Bike Bicycle Installation

✅Brake Arm tension adjustable : Easy adjust tension of Brke Arch in Spring inside by putting in the correct position of Frame/Fork

You will get: 2 pairs mountain bike brakes with the brake pads fit for most bicycle, road bike, etc.; 2 Pieces barrel ended brake cables (2 m in length), 2 pieces cable end caps and 6 pieces end ferrules

Product dimensions: the bike brakes in arch size is 110 mm (4.3 inches), brake pad is 55 mm (2.1 inches), barrel ended brake cables are 2 m in length

Durable material: this bike brakes set is made of alloy and plastic, strong and durable enough for using long time, meet your needs

2,000 mm cable length

Higher braking performance +5%

Lighter weight (-15 g)

▲70mm brake pads symmeteric shape : Compatible with V-brake, mountain bike. the longer contact area on the front of wheel rim ,Its not necessary identify Left /Right for our Design

▲High-end Rubber compound :The brake pads use supreme rubber suitable for all dry and wet weather condition and noise-free,no skid

▲Strong threaded Alu-Alloy body Design: It attached with nuts and washers, let it better align with the Rim clearance more easy.

BETTER BRAKING POWER: Our bike brakers generate far more braking power than standard brake pads. For the rider this means having to apply far less pressure on the brake levers, reducing muscle tiredness, especially on long descents where you are constantly having to check your speed of bicycles.

RELIABILITY IN WET WEATHER: Our mountain bike pads provide better grip in wet weather. Our bmx brake pads for the bike is designed in such a way that you do not get slightly delay in braking of bikes and provide a better ride in wet conditions too.

A FASTER RIDE: Our mountain brake pads are designed in such a way that a rider gets a faster ride. As riders will get more trust on the braking power of the road bike brake pad so they brake frictionally and spend more time travelling at the higher speeds as they are spending less time on the brakes.

Material: Ceramic(Asbestos free) / Color : Dark Orange

Extremely long service life, high temperature resisting. Adapted to various road surface

Smooth and powerful braking, low noise. Designed for professional trainings and games. Perfect performance

Odyssey Springfield Kit – Springfield U-brake – Springfield lever – Slic cable

3-finger lever

Cover black

Can be used left/right

Size: The bicycle V brakes Arch size:110mm (4.3inches), Brake Pads Size:55mm(2.1inches). Suitable for most V-type brakes bike

Material: This V Brakes strong and durable enough for using long time. The brake arm is made of aluminum alloy, solid and not easy to break. The brake pad is made of hard-wearing rubber, resistance to cold, heat and oxidation, not easy to deform. This Bicycle Brakes can provide great braking power on bike rim in both dry and wet conditions

Install: 1. Screw the fixing hole of the brake corresponding to the body fixing hole; 2. Pass the brake wire through the brake wire tube in sequence, and fix the position of the metal wire tube; 3. Fix the brake line on the bolt, then install the brake leather, adjust the distance, position and length of the brake line, and then fix the brake line firmly

CNC bike V brake arms are made of T6 forged aluminum.

Arm Length: 110mm.

Coil springs design aims for rim brakes’ tension adjustment.

HYBRID BRAKE AND EASY TO INSTALL AND FIX-The Juin Tech M1 isn't a straightforward mechanical disc brake though, it's a hybrid or cable-operated hydraulic.This means you can use them with just about any standard MTB or road-style integrated shifters - even ones designed for use with rim brakes.

POWERFUL BRAKE-It's an appealingl solution for anyone looking to gain some of the much vaunted advantages of hydraulic braking - increased power and better modulation - without needing to replace an entire groupset.

HIGH QUALITY AND LIGHTWEIGHT-Juin Tech has tested these brakes in the 3 Peaks Cyclocross race, outstanding braking performance and stopping power.They're lightweight at just About 142g and 30g less than the Shimano mechanical units.

【Pack & Note】-- Pack of 1 pair Mechanical Disc Brake (0mm for Front, 20mm for Rear), 2PCS 160mm 6-Bolt Disc Rotors, 4PCS 16.8mm fixing bolts, 12PCS titanium bolts. Please check the specifications in the 2 & 3 product image to ensure it match your requirements for proper fit.

【Dismensions】-- All calipers have both 74mm and 51mm mounting bolt spacing, each weights 180g. The Disc Rotor inner diameter 44mm, outer diamerter 160mm, thickness 2mm, each weights 126g.

【Mechanical Disc Brake】-- Cable actuated post mount mechanical disc brake calipers provide excellent stopping power and are easy to service.

Upgraded bicycle brake pads,Spring tension adjustable.

Lightweight rim brakes give more stopping power.

Arch size:110mm,Brake Pads Size:70mm.

4 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions

Size: the road brake pad is about 50 mm/ 1.97 inch in length; Each piece has a nut and a spacer, it's easy to remove and install with the tool

V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability

(F.BRAKE Screw Length 28mm,18mm Nut.) (R.BRAKE Screw Length 12mm,10mm Nut.)

Arm length: 47-57mm / Double shaft/ Brake pads can adjust the angle.

Suitable for aluminium road frame / field vehicle

New bike Rim brake sets, adjustable spring tension

Lightweight skid brakes provide greater stopping power.

Shackle size: 110 mm, brake pad size: 70 mm.

This is professional bike brake bleed kit, compatible with Most Brake Systems In the Market

10pieces adapters apply for Avid, Formula, Hayes, Fox, DTSWISS, Rockshox, Bengal, Quad, Echo,Giant Brake System and Fork,Shimano, Magura, Tektro, Hope

Compatible with Both Mineral and DOT Fluid, but same one cylinder do not exchange from DOT and Minerial Oil.

Complete bike braking kit: you will get 2 pairs of V type brakes, 2 pieces of braking cables and 4 pieces of cable end caps in total; This is a complete set of mountain bike brake equipment

Size information: the brake arm is 110 mm/ 4.3 inches; The brake pad is 55 mm/ 2.2 inches; The front and rear brake cables are 27.5 inches and 68.9 inches respectively; They are suitable for most V-type brakes bike

Quality materials: the brake arm is made of aluminum alloy, which is solid and not easy to break; The brake pad is made of hard-wearing rubber, which is heat resistant and not easy to deform, providing great braking power on bike rim in both dry and wet conditions; The brake cable is also made of quality aluminum alloy and covered with black PU leather pipe, which makes the cable more strong and durable

Front or rear side pull brake set

Includes lever, cable, housing and two mounting bolts for use on front or rear

Forged aluminum construction

Brake Design: Side-pull caliper

Brake Max Width 88mm

Lever Dimension:67-85mm(lever)

Nice combination: the bike C brake kit includes 2 pieces bike brakes calipers road bike C shape brake, 1 pair aluminum bicycle brake lever brake housing, 1 pair cable brakes V type replacement set, enough for your bike C brake set replacement

Quality materials: C brake and brake are made of quality aluminum alloy material, the brake line is also made of quality aluminum alloy, the outer cover is covered with black leather tube, strong and durable, is a quality bicycle journey companion

Adjustable brake: the upper and lower distance of dual pivot bike brake can be adjusted to fit your various types of bicycle, offering a comfortable using period to you; The distance between the 2 brake skins is about 1.46 inches/ 3.7 cm; Note: please confirm your tire size before purchasing; This brake is suitable for most road bikes: e.g. 24/26 Inch 183 tires, 700C road bikes, not suitable for mountain bikes and children's mountain bikes

Contains everything you need for a rear brake on a BMX

Includes U-Brake, Lever, Cable, Straddle cable, Brake hanger and Brake pads