Best Wolf Tooth Components Bike Seat Posts in 2026

【PAY ATTENTION】Please do measure the actual required diameter before purchasing. Saddle clamp is not included, please buy the saddle clamp separately if needed.

【MATERIAL】Seatpost made of 6061 aluminum alloy,strong and durable.

【SIZE】Length:350mm;Diameter:25.4mm 27.2mm 28.6mm 31.6mm;Thickness of the tube:3mm.

【PAY ATTENTION】Please do measure the actual required diameter before purchasing. Saddle clamp is not included, please buy the saddle clamp separately if needed.

【SIZE】Length: 350 mm; Diameter: 27.2mm; Thickness of the tube: 2 mm. Weight：6.6 ounces. Color: Black.

【MATERIAL】 Seatpost made of aluminum alloy,light weight and durable.Polished anodized finish, never rust.

2x lever - Works on mountain bikes will all drivetrains, but is designed to play nice with front shifters

Includes Jagwire LEX-SL cables and housing

Both levers are compatible with most mechanically actuated dropper posts. Made from forged alloy, no plastic or poly

Spring Coil Suspension: Build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks. Rebound force adjustable by tighten or loose the bottom screw. Suspension travel 42mm/ 1.65inch.

★Pay Attention to Diameter Before Buy★ . Wrong diameter will not able to install, 27.2mm/28.6mm/30mm/30.4/30.9/31.6/33.9 they are different and not exchangeable. You can see your seatpost diameter if you take out it from the bike frame.

Clamp Angle Adjustable: Saddle clamp angle can adjust in -5 degree to +18 degree. Clamp offset 14mm.

Mountain Bike Seatpost Size: 27.2mm/30.9mm/31.6mm,Total length: 400mm.

Pay Attention to Choose Correct Diameter Size:Take out your current seatpost, the diameter marked on it’s lower area. Then buy same size from the option.

Material:Forged aluminum alloy 6061 T6.

Versatile Use : UpDown bike seat post lever can be mounted left or right, under or above the handlebar, allowing riders to find the most comfortable and ergonomic position for the lever while tackling the trails!

Perfect Compatibility : UpDown works with the cable-actuated dropper posts and with posts with cable stops at the post or lever end, meaning riders can easily upgrade their dropper seatpost setup without having to worry about compatibility issues.

Effortless Activation : Funn UpDown gives longer leverage that allows you to apply less force to the lever in order to activate the seatpost, making it easier and more comfortable to switch between seated and standing positions, especially on rough terrain.

The Frodon Seat Clamp is available in two sizes - 31.8mm and 34.9mm - to fit a range of bike seat posts. Simply measure the size of your seat tube and choose the corresponding clamp size to ensure that it fits securely and holds your seat post in place.

Easy Installation: Its locking threaded nut allows for a simple and secure attachment to your bike, ensuring that your seat stays put no matter how bumpy the ride gets. With the Frodon bicycle seat clamp, you can hit the trails with confidence knowing that your seat is secure.

Built to Last : Fully CNC machined from aerospace 6061 alloy, this seat clamp is built to last and withstand the wear and tear of everyday use. Its unique two-tone finish adds a touch of style to your bike, and at just 13g, it won't weigh you down.

★How To Choose Correct Diameter Size★ : (1) Check The Original Seatpost Size Marked On The Body ,Choose The Same Size As The Original One.(2) Measure The Inside Diameter Of The Frame Tube(Normally It Is Not Accurate, Considering Operator,Measuring Tool , Temperature,Etc.,).(3) Inquire The Bike Frame Seller To Get The Further Information

★How To Adjust And Install Suspension★ : Rebound Force Adjustable By Tighten Or Loose The Bottom Screw Wiht M6 Allen Wrench. Suspension Travel 42mm/ 1.65inch.Build-In Spring Coil And Damper Rubber Absorb The Vibration While Riding, The Seat Post Comfort Your Riding Experience, Improve The Shocks. Saddle Clamp Angle Can Adjust In -5 Degree To +18 Degree. 2 Bolts Hold The Clamp, Enhance Safe And Easy To Install

★Seat Tube Parameters★ :Material: 6061-T6 Alloy Aluminum , Diameter : 27.2mm Length: 350mm Travel: 40mm Adjustable Preload Suspension Travel. Offset :14mm .Weight: Approx 490g(1.08 Lbs) Damping:Coil Spring , You Can Add Seatpost Thim(27.2~28.6/30.0/30.4/30.8/30.9/31.6/33.9) To Fit Different Size

PAY ATTENTION:Please do measure the actual required diameter before purchasing. Saddle clamp is not included, please buy the saddle clamp separately if needed.

SEATPOAT SIZE: 27.2*300 mm (1 x 11.8 inch). Shock absorb travel 55 mm /2.17 inch.

SPRING COIL SUSPENSION:Bicycle seat post has built-in spring coil and damper rubber , which are designed to absorb vibration during riding and bring a comfortable riding experience.

Large Diameter Ball Bearing Pivot

Breakaway Axle Pivot

Cable-Kind Clamp

Spring Coil Suspension: Build-in spring coil and damper rubber absorb the vibration while riding, the seat post comfort your riding experience, improve the shocks. Rebound force adjustable by tighten or loose the bottom screw. Suspension travel 40mm/ 1.58inch.

★Pay Attention to Choose Correct Diameter Size★ . Wrong size will not work and will cause return. This suspension post has 27.2, 28.6, 30, 30.4, 30.9, 31.6mm diameter for choose.

Clamp Angle Adjustable: Saddle clamp angle can adjust in -5 degree to +18 degree. Clamp offset 14mm.

ReMote Magura for Magura brakes and some 2-bolt clamp SRAM brakes - Includes Magura hardware and large-diameter ball-bearing pivot with a sealed cartridge for smooth operation and unparalleled modulation.

The dropper cable is attached at the lever and has an intgrated barrel adjuster to make setup and adjustment quick and easy.

Compatible with all cable actuated dropper posts. Compatible with 9point8, Bike Yoke Revive, Bontrager, DVO Garnet, Easton Haven, Fox Transfer, Giant Contact, Gravity Dropper, KS, PNW, OneUp, Race Face Turbine, Shimano Koryak, Specialized, Thomson, TransX and more.

ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware and large-diameter ball-bearing pivot with a sealed cartridge for smooth operation and unparalleled modulation.

The dropper cable is attached at the lever and has an intgrated barrel adjuster to make setup and adjustment quick and easy.

Compatible with all cable actuated dropper posts. Compatible with 9point8, Bike Yoke Revive, Bontrager, DVO Garnet, Easton Haven, Fox Transfer, Giant Contact, Gravity Dropper, KS, PNW, OneUp, Race Face Turbine, Shimano Koryak, Specialized, Thomson, TransX and more.

ReMote IS-EV for Shimano I-Spec EV - Includes IS-EV hardware and large-diameter ball-bearing pivot with a sealed cartridge for smooth operation and unparalleled modulation.

The dropper cable is attached at the lever and has an intgrated barrel adjuster to make setup and adjustment quick and easy.

Compatible with all cable actuated dropper posts. Compatible with 9point8, Bike Yoke Revive, Bontrager, DVO Garnet, Easton Haven, Fox Transfer, Giant Contact, Gravity Dropper, KS, PNW, OneUp, Race Face Turbine, Shimano Koryak, Specialized, Thomson, TransX and more.

Strong resilient and non-marring DuPont  Delrin thermoplastic allowing for easy snap-on installation and full strength all the way down to -20°F/-29°C. | Shifts cargo to the bike: Small- and mid-sized saddle bags are ideal places to securely store tubes mini tools and CO2 cartridges ensuring that they’re always on hand when needed while freeing up the top tube and handlebar bags for more regularly accessed items. | Protects dropper post stanchion: Inexpensive insurance the Valais protects dropper post stanchions from the wear that occurs at the intersection of saddle bag seatpost and wheel-flung grit. | Emergency crutch: While dropper posts continue to improve locking mechanism failure still occurs- often far from the trailhead. The Valais can be used to keep posts extended allowing the rider to comfortably pedal out of the backcountry. | Raceday travel limiter: When seven inches is more than the terrain calls for the Valais can be used to limit dropper travel to suit. | 35mm tall |Valais limits the dropper travel by at least 25mm.|Must have an internal cable routing dropper post|Optimized for straps up to 1" (25mm) wide though will work with wider straps|There are two Valais sizes available: 25mm diameter stanchions and one for the 26mm stanchions. Measure your upper seatpost stanchion diameter to determine the correct size to use.|Valais 25mm accommodates posts with 24.75-25.25mm stanchion diameter. Some known posts of this size include:|Easton Haven|Giant Contact (internal routing)|RaceFace Turbine|RockShox Reverb Stealth|Specialized Command Post|9Point8 Fall Line|Bikeyoke Revive|Others|Valais 26mm accommodates posts with 26-26.5mm stanchion diameter. Some known posts of this size include:|Wolf Tooth Resolve|Thomson Covert|Fox Transfer|KS eTen|One-Up|Others|At full compression the Valais' deep skirt contacts the seal collar first and will not contact the seal lip (protecting delicate seals from damage). |Remove the screw and slide Valais over seatpost stanchion|Put the Valais at the highest position install the screw and tighten to 2-3 NM|Install your saddle bag with it as full as it will be on the trail.  |Let all the air out of your frame shock drop the post and compress the bike suspension all the way.|Assure there is adequate tire to saddle bag clearance. If there is not tire clearance raise the dropper and lower the Valais until there is adequate tire to saddle bag clearance.|Re-inflate your shock and be sure that the Valais is torqued to 2-3 Nm|Cockpit Accessories

ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB hardware and large-diameter ball-bearing pivot with a sealed cartridge for smooth operation and unparalleled modulation.

The dropper cable is attached at the lever and has an intgrated barrel adjuster to make setup and adjustment quick and easy.

Compatible with all cable actuated dropper posts. Compatible with 9point8, Bike Yoke Revive, Bontrager, DVO Garnet, Easton Haven, Fox Transfer, Giant Contact, Gravity Dropper, KS, PNW, OneUp, Race Face Turbine, Shimano Koryak, Specialized, Thomson, TransX and more.

Large Diameter Ball Bearing Pivot

Breakaway Axle Pivot

Hope Brake Mount

A leak-proof robust and low-maintenance mechanical actuation system | Easy cable detachment for service or shipping | A 40mm (1 5/8in) reduction of in-frame height when compared to Connectamajig-equipped Reverbs | Straightforward 15-minute installation | Reverb Stealth generation A2 and B1 compatibility | Wolf Tooth's low-profile high-traction lever | Easily installed upfront cable fixing | A large-diameter 21mm ball-bearing pivot | Our low-torque cable-kind clamp | A solidly-mounted rattle-free integrated cable adjuster | The industry-first breakaway axle pivot making the inevitable mishaps less (financially) painful |Compatible with Rockshox Reverb A2 and B Spec Stealth (internal) routing dropper posts.|NOT compatible with A1 or C1 spec Reverbs.  See below for figuring out if you have an A1.  C1 Reverbs will have "Reverb" will be marked in gold cursive at the top of the post.|NOT compatible with non-Stealth (externally routed hydraulic hose)|A2 Spec has no marking at the top of the stanchion and the speed adjuster knob is black (vs Silver for the A1)|B Spec has gold "Rockshox" written at the top of the stanchion|If you have large hands (size XL glove) we recommend the 22mm handlebar clamp so you have more flexibility to move the lever in.|See the picture carousel for a comparison of the ReMote IS-II vs ReMote LA IS-II (note that the Sustain system requires the use of a LA or Light Action lever)| ReMote IS-AB for Shimano works for some Hope Brakes.  See details here | Contact us for questions on other post compatibility.|ReMote IS-AB for Shimano I-Spec A or B - Includes IS-AB Hardware|ReMote IS-AB for Shimano works for some Hope Brakes.  See details here.|ReMote IS-II for Shimano I-Spec II - Includes IS-II Hardware |ReMote MM SRAM/Avid MatchMaker X  - Includes the MatchMakerX hardware which is a T-Nut and bolt that allows the ReMote MM to attach to the MatchMakerX clamp. You will need the MatchMakerX handlebar clamp which we do not sell but can easily be purchased.|ReMote 22.2mm - includes hinged handlebar clamp for 22.2mm handlebars (22.2mm is the standard diameter where your shift and brake levers attach). Attach with 1 NM max (it doesn't take much!). |Standard ReMote for cable actuated droppers|Other cockpit accessories|ReMote replacement parts 

Wolf Tooth

ReMote Sustain

Dropper Seatpost Remote

Large Diameter Ball Bearing Pivot

Breakaway Axle Pivot

Hope Brake Mount

Material: aluminum

Length: 55mm

Claimed Weight: [Shimano I-Spec B] 46g, [Shimano I-Spec II] 47.5g, [Shimano I-Spec EV] 47g, [SRAM MatchMaker X] 48.5g, [22.2mm universal clamp] 48.5g, [Magura] 48.5g, [Hope Tech 4] 48g, [Hayes] 47g

Wolf Tooth

ReMote Sustain

Dropper Seatpost Remote

Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head

Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash

Cable Kind Clamp does not damage secured cables and features captive hardware

Material: CNC-machined

Diameter: 30.9mm, 31.6mm

Travel: 125mm, 160mm, 200mm

Material: aluminum

Length: 55mm

Claimed Weight: [Shimano I-Spec B] 46g, [Shimano I-Spec II] 47.5g, [Shimano I-Spec EV] 47g, [SRAM MatchMaker X] 48.5g, [22.2mm universal clamp] 48.5g, [Magura] 48.5g, [Hope Tech 4] 48g, [Hayes] 47g

The ReMount is designed to work with cable-actuated dropper and shock remotes with pivots parallel to the handlebar center|We do not recommend the ReMount for RockShox Reverb remotes.|We do not recommend the ReMount for multi-chainring drivetrains (it sits where your front shifter does)|The ReMount mounts securely to all standard (22.2mm) mountain bike handlebars |The ReMount is designed to work with cable-actuated dropper and shock remotes with pivots parallel to the handlebar center|The ReMount MM mounts securely to all MatchMaker X (MMX) compatible SRAM and Avid brake levers|TheReMount MM can be mounted to the underside of top/left RockShox MMX hydraulic lockouts|SRAM's MatchMaker X T-nut and matching Torx screw (pictured in gallery) are required for mounting| The ReMount MM is available with genuine MatchMaker X hardware if needed | The ReMount IS-AB mounts securely to all Shimano I-Spec A and I-Spec B left brake levers |Not all provided hardware will be required for each standard | The ReMount IS-II mounts securely to all Shimano I-Spec II (11-speed generation) brake levers

Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head

Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash

Cable Kind Clamp does not damage secured cables and features captive hardware

Levers are Reverb Stealth series specific - A-series have no Rockshox marking below the head whereas B-series have gold Rockshox markings below the head

Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash

Cable Kind Clamp does not damage secured cables and features captive hardware