Best Powertec Blades in 2026

Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts

Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts

Featuring both a 32-tooth blade for general woodcutting and a 80-tooth blade for fine-finish woodworking

Blades measure in at 12-inch diameter (305 mm) with a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts

Featuring both a 32-tooth blade for general woodcutting and a 60-tooth blade for fine-finish woodworking

Blades measure in at 10-inch diameter (254 mm) with a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM

Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.8 mm) provides clean and efficient cuts

Featuring a 12-inch diameter (305 mm), a 1-inch arbor (25.4 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.6 mm) provides clean and efficient cuts

Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 6000 RPM

Perfect for slicing through both hard and softwoods of all kinds

Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts

Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM

Perfect for slicing through fiber cement board and laminate flooring

Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts

72-Inch length designed for use with the WEN 3962 10-inch two-speed band saw and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/2-inch blade width provides users a minimum cutting radius of 2-1/2 inches

Featuring a 6. 5-inch diameter (165 mm), a 20 mm arbor, and a rating of up to 9000 RPM

24 carbide-tipped teeth perfect for slicing through hard and soft woods alike

1. 8 mm kerf (. 07 inch) provides clean and efficient cuts

72-Inch length designed for use with the WEN 3962 10-inch two-speed band saw and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/8-inch blade width provides users a minimum cutting radius of 3/16 of an inch

72-Inch length designed for use with the WEN 3962 10-inch two-speed band saw and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/4-inch blade width provides users a minimum cutting radius of 5/8 of an inch

72-Inch length designed for use with the WEN 3962 10-inch two-speed band saw and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

3/8-inch blade width provides users a minimum cutting radius of 1-1/2 of an inch

59.5-Inch length designed for use with the WEN 3959 9-inch benchtop band saw and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/8-inch blade width provides users a minimum cutting radius of 3/16 of an inch

64-1/2 Inch x 1/2" X 0.025 X 8/12 TPI Metal Bandsaw Blades

64-1/2 Inch Bandsaw Blades Perfect Fit for WEN 3970, Grizzly G0622 , Harbor Freight, JET Model: HBS-56S (414301) 414458 HVBS-56M 414457 Horizontal/Vertical Band Saw POWERTEC , Shop Fox W1715 , SKIL, RIKON, Sears Craftsman, BILT HARD 4"" x 6"" Metal-Cutting Band bandsaws requiring a 64-1/2" long 1/2" wide blade

Recommended for cutting Mild Steel ,aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects.

59.5-Inch length designed for use with the WEN 3959 9-inch benchtop band saw and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

3/8-inch blade width provides users a minimum cutting radius of 1-1/2 of an inch

Featuring a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM

Perfect for framing, trim carpentry, remodeling and more

Ultra-thin 1/10-inch kerf (2.4 mm) provides clean and efficient cuts

100.75-Inch length designed for use with the WEN 3966T and 3966 14-inch band saws and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/4-inch blade width provides users a minimum cutting radius of 5/8 of an inch

100.75-Inch length designed for use with the WEN 3966T and 3966 14-inch band saws and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/2-inch blade width provides users a minimum cutting radius of 2-1/2 inches

Product 1: 9.5-amp motor creates cuts up to 8.85 inches deep and 13-3/8 inches wide

Product 1: Uses 100-3/4-inch blades anywhere from 1/8 to 1 inch wide

Product 1: Spacious 21-1/2 x 15-3/4-inch work table bevels up to 45 degrees

62-Inch x 1/2" X 0.025 X 24 TPI Metal Cutting Band Saw Blades

Fits all band saws requiring a 62" long 1/2" wide blade

Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic

64.5-Inch length designed for use with the WEN 3970T and 3970 metal-cutting band saws and other similarly sized metal band saws

Hard back style offers a strong high carbon, spring-tempered back for straight and precise cuts

Blade measures in at 0.5 inches in width and .025 inches in thickness

59.5-Inch length designed for use with the WEN 3959 9-inch benchtop band saw and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/4-inch blade width provides users a minimum cutting radius of 5/8 of an inch

Easily take on ferrous metals, non-ferrous metals, plastics, woods, and more

Features a rectangular cutting capacity of 3.75 by 7.25 inches, a round tube cutting capacity of 5.125 inches, and a steel plate cutting capacity up to 0.5 inches thick

Powerful 15-amp motor rotates the blade at up to 1450 RPM

100.75-Inch length designed for use with the WEN 3966T and 3966 14-inch band saws and other similarly sized band saws

Flex back style combines hard teeth with a softer back to maximize the blade’s life span

1/8-inch blade width provides users a minimum cutting radius of 3/16 of an inch

Features a 7.25-inch diameter (185 mm), a 5/8-inch arbor (15.875 mm), and a 7000 RPM speed rating

Non-abrasive heat-resistant PTFE cool-cut coating prevents workpiece burns for a higher-quality cut

Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts

56.5-inch length designed for use with the WEN 3975T and 3975 Metal-Cutting Band Saw and other similarly sized metal band saws

Bi-metal blade design provides shock and heat-resistance to withstand temperatures up to 1000 degrees Fahrenheit

Blade measures in at 0.5 inches in width and .025 inches in thickness

Features a 7.25-inch diameter (185 mm) and a 5/8-inch arbor (15.875 mm)

Rated for speeds up to 7000 RPM

Ultra-thin 1/16-inch kerf (1.6 mm) provides clean and efficient cuts

Featuring a 10-inch diameter (254 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 4500 RPM

Perfect for framing, trim carpentry, remodeling and more

Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts