Best Annhua Blocks in 2026

★【Clean Installation】- How to clean up your cluttered battery terminals? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system.

★【Heavy Duty】- Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground, battery, and ignition on). Great for compact wiring jobs.

★【Protect Cover】- Our dual row screw terminal strips that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers.

DOUBLE-SIDED MAGNETIC DESIGN: Our magnetic knife holder comes with four super-strength hid magnets for wide coverage and strong suction to hold a variety of kitchen knives securely. Suitable for metal kitchen utensils such as steak knives, bread knives, chef knives, fish knives, bottle openers, etc. The double-sided design holds up to 10 knives. Note: NOT for CERAMIC KNIVES.

CLEAR ACRYLIC PROTECTIVE COVER: This knife stand avoids the danger of knives sliding back when pulled open like a drawer knife holder, and the acrylic protective cover eliminates potential injury from sharp blades. There's plenty of room at the top to slide the knife in and out. Our universal knife block securely stores knives with blades up to 8.6"/22 cm. Please take the length of the knife handle into account if you plan to use it under a cupboard.

WIDENED BASE & ANTI-SLIP FEET: The knife storage's base is 4.5 inches wide and 0.8 inches high, which is more stable than other knife holders, and has a non-slip mat at the bottom, so you don't have to worry about slipping, skidding, sliding, or wobbling around when bumped.

The Mantello knife holder fits all your knives and kitchen accessories. The universal knife block allows you to put your utensils wherever you want, without the restrictiveness of pre-measured slots.

The unique flex rods on the knife storage block won’t chip or dull your knife blades like other wood knife blocks, keeping your knives sharp and ready to go.

Clear your space of clutter with the kitchen knife holder. Whether it's a messy drawer or cluttered countertop, this universal knife holder allows you to attractively store and display your knives and other utensils.

★【What You Get】 - In this terminal block set,it include 6pcs 4 positions 600V 15A double row screw terminal strip blocks with cover,6pcs 400V 15A pre-insulated barrier jumper strips,60pcs insulated fork wire connectors,1pc screwdriver.Total 73pcs packed in a bag.

★【Easy Install】 - The terminal strips are easy to install and held in place by two screw holes at either end of the terminal.The fork terminal stripe can be cut in any position to meet with your different demand.You have the option of of making 4 individual connections or by using the whole barrier bar or part of it up to 4 connections to a single line. Once the connections have been made, clear plastic covers are included that push lock into place to protect the terminals.

★【Heavy Duty】 - Our terminal/barrier strips are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. The shell is made with flame resistant material, more safer. Copper plate conductor has good electrical conductivity and also nickel plated has a better anti-oxidation performance which make it more durable.

HIGH QUALITY ACACIA WOOD:The texture is clear, refined and polished, the surface is treated with natural vegetable oil, the wood is delicate, fashionable and beautiful.

EASY TO CLEAN:The internal bristles are detachable, easy to clean and convenient

STABLE AND FIRM:The anti-skid foot pad is set at the bottom, which can enhance the stability of the anti-skid foot when cutting, and ensure the safety when using. Acacia wood ensures that the knife holder can withstand the natural chaos of any kitchen or busy restaurant environment.

STYLISH SPACE-SAVING DESIGN - A double-sided magnetic design can easily hold up to 12 knives, with additional storage on the back to hold your cutting board. Knives are easily accessible when you need them, there is no need to rummage in drawers looking for knives. ENOKING knife display magnetic not only can keep your kitchen countertop neat and organized but also showcase your knife collection, beautiful and elegant.

POWERFUL DOUBLE-SIDED MAGNETIC DESIGN - Built-in multiple enhanced black magnetic stripes, wide-coverage, strong adsorption to secure the knife blades securely in place, even if cutlery widgets, no need to worry about falling off. Also suitable for common household kitchen knives and other metal kitchen tools (steak knife, chef knife, scissors, sharpener).

PROTECTIVE ACRYLIC SHIELD & ANTI-SLIP FEET - Transparent acrylic protection eliminates potential injuries caused by sharp knife blades, essential for families with children or pets. The anti-slip base design makes the tool placement more arbitrary and stable, and no need to worry about slipping or shaking. The acrylic shield can be disassembled when you do not need it.

★【What You Get:】In this terminal block set, it include 5pcs 3 positions double row screw terminal strip blocks with cover, 5pcs black and red pre-insulated barrier jumper strips, 60pcs insulated fork wire connectors. Total 70pcs are well packed in a bag.

★【High Quality:】The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance (transparent dust cover is not flame retardant). High-quality brass guide, excellent electrical conductivity, the appearance of nickel-plated, rust and durable.

★【Product Feature:】The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite; Also include a clear cover to protect accidental touching of the terminal. Transparent cover, clear and intuitive internal components, allows for visual inspection of insert terminals.

HIGH QUALITY ACACIA WOOD:The texture is clear, refined and polished, the surface is treated with natural vegetable oil, the wood is delicate, fashionable and beautiful.

EASY TO CLEAN:The internal bristles are detachable, easy to clean and convenient

STABLE AND FIRM:The anti-skid foot pad is set at the bottom, which can enhance the stability of the anti-skid foot when cutting, and ensure the safety when using. Acacia wood ensures that the knife holder can withstand the natural chaos of any kitchen or busy restaurant environment.

Included: (1) Walnut knife organizer

Product can simply be dropped into drawer or trimmed to a custom fit (table saw recommended)

Designed for drawers from 12.5" to 18.5" in Width

THE BEST PROTECTION FOR YOUR KNIVES - keep them sharp hygienic and damage free instead of sitting in a traditional dirty knife stand or knife block this magnetic kitchen knife holder is the answer

INCLUDED - double sided large magnetic knife block crafted from Acacia wood with gift box. Our knife display stand has strong magnets, stainless steel stand with anti-slip rubber base, clear acrylic screens to protect your knives. Our kitchen knife blocks are the ideal wooden knife holders without knives

RISK FREE PURCHASE - we know you’ll love our extra large universal knife block but if there's problems with your knife rack contact us and we will take care of it. Satisfaction guaranteed

The product only contains knife stand, without any accessories (such as cleaning brush, chopping board, knife). Versatile use, double-sided strong hidden magnets can safely and healthily place kitchen knives and cutting boards. Suitable for common household kitchen knives. Built-in multiple enhanced black magnetic strips, with wide coverage and strong adsorption, can hold the blade firmly in place, even if it is a tableware gadget, there is no need to worry about the knife falling.

Protective acrylic shield and non-slip feet, 0.11" double acrylic sheet for easy cleaning. Clear acrylic guard eliminates potential injury from sharp blades, which is essential for households with children or pets. This magnetic knife block is very safe for the blade you are going to place because the blade only touches the wood and the blade stays sharp to prevent damage.

No installation required, and unlike magnetic blade bars or shanks, this blade requires no screws and won't damage walls or countertops. Eliminate tedious installation steps and the knife holder won't damage your walls or kitchen countertops. Smooth and delicate surface, clear vision, easier to clean and maintain than slotted knife holders.

Easy to assemble: The knife holder is very easy to assemble, the whole operation takes only 5-8 minutes. We provide instructions and installation videos to make sure you can assemble it correctly.

Ergonomic and durable: Knife Block is designed with an inclined angle to make it easier to grasp the knives habitually. Knife Block is sturdy enough to hold heavy knife sets, greatly helping your kitchen stay organized and ready for cooking delicious food.

Tempered glass:Added to its versatility, this fantastic bamboo block is placed between two tempered glass sheets with an attractive curve. Your knives are at the perfect angle for both display and use, with an open bottom that allows moisture and dust to fall away naturally.

Safely stores most sized knives (unlike tradtional knife blocks with pre-sized slots)

Keeps your fingers safe while protecting your knife's blade

Frees up valuable counter space, and makes all other knife storage solutions obselet

👩‍🍳【Special Material】The drawer type knife holder is made of beech wood, which is beautifully cut, with clear lines and smooth polishing. Storing the knife set in the knife holder can keep the knives sharp. Beechwood is stronger than bamboo, more impact resistant, less prone to breakage, and lasts longer as a kitchen appliance. We are confident in that.

👩‍🍳【Special Design】The drawer design keeps the knives neat and orderly, making the knives more secure and saving counter space. The finely sculpted grooves and angled handle design make it easier to pick and place the knife, allowing room for even larger knives, and it also ensures that the tip doesn't point up.

👩‍🍳【Comparison with other knife slots】Compared with other drawer knife holders, it can be placed in the drawer to keep the countertop neat and tidy. When you are not using it, you can easily take it and organize it in the drawer, no matter how you hide it, it will not be hidden Takes up too much space. Not only can be used as a kitchen knife holder, but also as a kitchen decoration

★CLEAR UP KITCHEN COUNTER & SPACE-SAVING - A double-sided magnetic design can easily hold up to 12 knives, with additional storage on the back to hold your cutting board. Knives are easily accessible when you need them, there is no need to rummage in drawers looking for knives. knife display magnetic not only can keep your kitchen countertop neat and organized but also showcase your knife collection, beautiful and elegant.

★CLEAR UP KITCHEN COUNTER & SPACE-SAVING - A double-sided magnetic design can easily hold up to 12 knives, with additional storage on the back to hold your cutting board. Knives are easily accessible when you need them, there is no need to rummage in drawers looking for knives. knife display magnetic not only can keep your kitchen countertop neat and organized but also showcase your knife collection, beautiful and elegant.

★PROTECT ACRYLIC SHIELD & ANTI-SLIP FEET - Transparent acrylic protection eliminates potential injuries caused by sharp knife blades, essential for families with children or pets. The anti-slip base design makes the tool placement more arbitrary and stable, and no need to worry about slipping or shaking. The acrylic shield can be disassembled when you do not need it.

Dual row with 6 positions Barrier Terminal Block

Clear plastic insulating cover is removable,screw barrier terminal block

Each pair of terminals is insulated from the next, prevent circuit in disorder

✯ Category: Barrier Terminal Strip; Type: TB-4503L, 3 Positions Dual Rows.

✯ Material: Copper, PVC; Color: Black, Brass Tone.

✯ Rated voltage/current: 600V/45A.

Rated Value: 600V 45A; Poles: 6 Position, Dual Row; Terminal Quantity: 12.

Removable clear plastic insulating cover prevents accidental contact the terminals.

Each pair of terminals is insulated from the next, prevent circuit in disorder.

The knife holder is made of natural acacia wood and marble, which is beautiful and practical. Made from natural high quality acacia wood, it is durable and has a beautiful patterned texture that complements any kitchen

Clear acrylic guard eliminates potential injury from sharp blades, which is essential for households with children or pets. This knife block is very safe for the blade you are going to place

Stylish Space-Saving Design double-sided acrylic shield can easily hold up to 10 knives, and keep your kitchen countertop neat and organized. Display your knife collection, and make it easier, quicker to use & safer to store your knives.

【SIMPLE AND GENEROUS DESIGN】：You can adjust the distance of the knife holder at will, no matter your knife is long or short, it is very suitable. The transparent acrylic material shows the knife and allows you to produce amazing results.

【UNIQUE DESIGN】: the right size of the opening does not easily let your knife slip off. The clear acrylic material shows the knife and gives you amazing results

【HIGH-QUALITY ACRYLIC MATERIAL】： knife holder is a high -quality and ultra -thick acrylic material. It is sturdy and durable, bending and deformation are not easy, and the service life is long.

Durable Beech Wood Material: Beechwood is stronger than bamboo, more durable and impact resistant, less prone to breakage. Our Beech Wood Knife Drawer Organizer Block, Eco friendly, high grade beech wood with excellent craftsmanship, no splinters or chips , beautifully cut, with clear lines and smooth polishing, it's a good choose for kitchen knife storage

In Drawer Knife Organizer: Our beech wood in-drawer knife organizer keeps your knives perfectly arranged and prevents them from sliding around or pointing up. It keeps the blades and handles from jamming your drawer or damaging your other kitchen utensils. The drawer design keeps the knives neat and orderly, making the knives more secure and saving counter space.

Functional tool & Save your kitchen space：The knife holder is pale yellow with beautiful wood grain. Fit most Standrad Kitchen Drawers- [17” Long, 9" Wide, 2” Tall]. Perfect fit for steak knife, bread knife, chef knife and ceramic knife etc. Safely and efficiently organize kitchen knives and save space.

【PREMIUM ACRYLIC MATERIAL】 -This knife holder is made of acrylic material, which is clean and transparent, and it is durable and will not rust. Used for a very long time. If you encounter any product problems, you can also contact us directly, we will provide after-sales service to your satisfaction.

【DUST-PROTECTED ACRYLIC KNIFE HOLDER DESIGH】 - Our design is safer than knife holders with knives exposed. The knives are also dust-proof in the knife holder and eliminate potential injuries from sharp blades, a must for families with children or pets. The non-slip base design makes the tool placement more random and stable, without worrying about slipping or shaking.

【CLEAR KITCHEN COUNTERS AND SAVE SPACE】 - Double-layer knife holder design can easily hold up to 12 knives. Knives are easily accessible when you need them, no need to rummage through drawers for knives. AITEE knives not only keep your kitchen countertop neat and tidy, but also display your knives collection in a beautiful and elegant way. The wall-mounted design is also very space-saving and keeps your kitchen clean and tidy.

ELEGANT DESIGN: This Dagger Stand Knife Display Stand is made of high-quality transparent acrylic material, which gives it a sleek and elegant look. Its clear design allows you to showcase your knives without distracting from their beauty.

HOLDS 6 KNIVES: With six slots, this display stand can hold up to six knives of various sizes and shapes, including hunting knives, daggers, and pocket knives. The slots are spaced apart to ensure that each knife has enough room to be displayed properly.

DESKTOP DISPLAY: Measuring 8.4 inches in length, 5.1 inches in width, and8.6 inches in height, this display stand is compact enough to be placed on any desktop or shelf. It's perfect for displaying your favorite knives in your office, study, or living room.

【LARGE CAPACITY & SAVE SPACE】Measuring 8.5” in width and 8.6” in height. The knife holder holds up to 12 knives, 2 extra slots to store sharpening rod and kitchen scissors. With a slim profile, it has compact countertop footprint, makes it convenient for saving space in kitchen.

【WHAT YOU SEE IS WHAT YOUR GET】With this Transparent knife holder box, it's easy to get the right knives at one shot, never worried about getting the wrong knives. At the same time, it can also better protect you from being injured by the knife.

【MODERN DESIGN & PREMIUM QUALITY】Clear white color is absolutely modern and all-match, sturdy and durable. It's a fashion and modern knife holder on your counter. You can reach the knives easily when you need.

❄【Exquisite Design】 Place your knives horizontally on the knife holder. Once placed on the table, they are sturdy, space saving and perfect for displaying your knives.

❄ 【Simple and generous innovation】Made of cylindrical slotted, the opening is the right size. The clear acrylic allows you to display your swords without covering them, making your products more eye-catching.

❄ 【High quality acrylic material】Made of high quality transparent acrylic material, solid and durable, not easy to bend and deform, long service life, the display stand is very durable and can be used for a long time without any maintenance.

【Electrical Test Passed】This is PLC breakout board can be mounted on DIN rail with width 15/32/35mm,Suitable for PLC and DIN rail mount,has been assembled, and electrical test passed.

【Rated Voltage】: 48V, rated current is 1A / per pin.

【Terminal Pitch】: 2.54mm / 0.1" screw terminal block.