Best Boat Trailer Accessories in 2026

Suited for all environments

The package length is 6.6 centimeters

The package height is 18 centimeters

Heavy-duty group 24-31 battery box for 12-volt marine, RV, boat, camper, and travel trailer batteries with an adjustable divider to accommodate various group sizes..Fit Type: Universal Fit

Features patented locking tabs to fasten the lid to the base securely and reinforced handles to prevent cracking during relocation.

Built for rugged environments with an impact resistance down to minus 20-degrees Fahrenheit, and unaffected by acid, gas, oil, as well as, UV exposure.

Floating key chain helps you recover key that drops overboard

Float has convenient chain that opens to attach to a key

Chain attaches key to float, which remains buoyant so key can be recovered

【Standard Size】The square shaft locking pin has a diameter of 6.3mm/ 1/4 inch and a length of 70 mm /2-3 / 4 inch, suitable for a variety of trailer connectors.

【High carrying capacity 】The pto pin made of high-quality carbon steel and spring steel and has a strong load carrying capacity. It is structurally strong and difficult to loosen when in use.

【Good safety performance】It's got a nice safety latch it's gonna come around it and hold it in place，you don’t have to worry about it popping out.

The cooler tie down kit secure cooler in place, fit for YETI coolers and other brand like RTIC coolers with tie-down slots on the boat, deck, truck bed or trailer

Cooler tie down straps made of 316 marine grade stainless steel, not rust, heavy duty. The cooler hold down straps with stainless steel cam buckles are very durable and long lasting to use

When the cooler hold down kit is not in use, only the low-profile cooler lock bracket remain, will not leaving to trip over. Such a safe and convenient cooler accessories for yeti cooler rtic cooler

Awesome Brightness: Each tail light has 10 PCS high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.

Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6” x2. 5” x 1. 75”

Upgraded Unique Design: Niligh's tail light has unique “ears” on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires

Sturdy Trailer for Guiding Boat: Properly center load your boat even in wind or side current conditions with this bunk board, keeping your trailer sturdy

Adjustable Boat Bunk Board: Boat trailer with 21” height with adjustment out to 13” from the frame on each side; can be mounted for extra height

Durable Boat Accessories: Boards made from untreated Southern yellow pine and covered with high-grade marine carpet fabric

Set of 3 cord organizers in assorted colors

Hook and loop fasteners

Great for organization

【1/4" Diameter】: This safety coupler pin is 2" (50mm) long and 1/4" (6.3mm) in diameter，suitable for quick release applications in variety situations.

【Rust & Corrosion Resistant】: Made of high-quality spring carbon steel material, the 1/4" hitch pin is durable and sturdy, fits for outdoor long-term use.

【Secure Hold】: These spring safety pin are structurally strong, convenient for using and will hard to loosen during use.

UV FADE PROOF 600 Denier Heavy Duty Canvas

Made in USA

Open End For Easy Installation, Capped End so Pad Doesn't Slide Down Post

【1/4" Diameter】: This safety coupler pin is 2" (50mm) long and 1/4" (6.3mm) in diameter，suitable for quick release applications in variety situations.

【Rust & Corrosion Resistant】: Made of high-quality spring carbon steel material, the 1/4" hitch pin is durable and sturdy, fits for outdoor long-term use.

【Secure Hold】: These spring safety pin are structurally strong and has strong load carrying capacity, convenient for using and will hard to loosen during use.

The Eaz Lift RV and trailer hitch ball attaches to the your ball mount to create a connection from your hitch to your rv or trailer. The hitch ball is gripped by the ball mount coupler and held into place on the rv or trailer's frame.

The ball diameter measures 2 - 5/16 inches. The diameter of the shaft which is inserted through the ball mount, is 2 - 1/8 inches in length with a 1 inch diameter. Shank is finely threaded to ensure a secure towing connection with holding strength.

This hitch ball's quality chrome finish over steel gives it a solid resistance to rust and wear. Also comes with plated washer and nut that is also resistant to rust and wear

DITCH YOUR OLD RUSTY BOW STRAP HOOK! And replace it with our Premium Rust Free Solution. Boasting a Higher Load Capacity and made 100% from Marine Grade 316 Stainless Steel, it will easily outlast all other winch hooks on the market. When it comes to the safety of your Watercraft, don't make compromises - get the Most Durable and Long Lasting equipment (2" WINCH STRAP SOLD SEPARATELY).

GET THE MOST DURABLE AN LONG LASTING BOAT WINCH HOOK! Ever found yourself struggling with a seized rusty winch hook while trying to connect or disconnect your boat from the trailer? We had, that's why we decided to make a better version of it. We engineered our hook to Withstand the Harshest Marine Conditions and remain Corrosion Free For Life.

QUICK AND EFFECTIVE BOAT OR JET SKI RETREIVAL! WavesRx Premium Boat Trailer Winch Hook with Safety Latch Quickly and Effortlessly connects to you watercraft's Bow Eye so you can Safely Pull it out of the Water and Load it Onto your Trailer. Recommended for use with Deck Boat, Jet Boat, Fishing Boat, Pontoon, Jon Boat, Jet Ski, Sea Doo and Wave Runner trailer winches.

【Standard Size】:3/8 inch X2-3/4 inch

【Safety】: This pin Made of high-quality carbon steel and spring steel and has a strong load carrying capacity. It is structurally strong and difficult to loosen when in use.

【Corrosion-Resistant】: Zinc plated to resist rust and corrosion

precision metal stampings, fabrications and assemblies

Adjusts out to 13" each Side

Fits Frames up to 3" W x 4-1/4" H

Give More Use Out of Your Riding Mower with Eapele Lawnmower Trailer Hitch---Pull around your log splitter or hook up your cart, get your trailer in and out of the back yard to clean your garage, or pull a small mini camper , even drive your boat around to the shed, this will work well.

Fits All Conventional Lawnmowers -- List of confirmed compatible brands of riding lawnmowers: John Deere, Ariens, Cub Cadet, Poulan Pro, Husky, Husqvarna, Craftsman riding mowers. Mower must have a full length back plate to mount the Hi Hitch to.

Heavy Duty Iron Made -- Made out of solid Iron, strong and durable enough to tow your boat around the yard. Outstanding powder black coating for rust-resistant.

Each one is equiped with 39 Super bright LEDs: 12 Red LED as Stop Turn Tail Lights, 21 White LED as Reverse Lights, 6 White LED as License Plate illuminator.

This square stop turn tail light is Universal for 12V vehicles like Truck, Trailer, Boat, bus, Lorry, Van, etc. Also you may need to DIY to suit for Jeep YJ JK Wrangler, Jeep CJ CJ-7 ( NOT factory Jeep light );

Partsam Lights are impact resistant and less susceptible to shock damage; Each LED is directly wired and water-tight sealed.

【Pup Up Style Designed】Comes with 1/5''(5.5mm) Male Plug and Combo-Bunk Clip is made for Pop Up RV Campers. No need Wiring - Tail Cable comes with convenience Male Plug. If you don't have the Female plug with your RV Camper, please use the female plug we included in this package. The female plug comes with 2 wires design on the end: black wire = Positive (+), white wire = Negative (-). Voltage: 12V DC

【Energy Commercial】The Light Comes with Long-lasting LEDs only Provide 7W Power to Save Your Vehicle Battery Power

【Significantly Brightness】 Each Light Fixture Emits Super Brightness Up to 500 Lumens and Clear Light to Bright Your Vehicle. Compare this Lumen Number to Other Lights!

Attractive flush mount styling, a recessed handle, and concealed mounting hardware gives these latches an appealing look

UV stabilized black plastic flush latch is designed to withstand harsh marine conditions.

It fits standard 2-Inch hole cutout. This UV stabilized plastic boat latch is durable and resistant to the harsh marine conditions.

Features chunky wheels, diving gear, walkie-talkie, megaphone, a detachable trailer and life jacket

Diving Boat features an engine and a steering wheel

Unhitch the trailer and launch the Diving Boat, boat really floats

Retractable bow tie-down system for boats; stainless steel for brackish or saltwater environments

Single buckle has 1,500 – pound breaking strength and 500 pounds safe working load

Buckle automatically retracts to hold the boat snug to the trailer

This Thin, low-profile 12" Led Trailer Light Bar or S/T/T Bar Can be mounted horizontal, vertical or at an angle, Slim design for use where space is a premium; Powered by 15 high power 2835 led chips emitters with 460 lumen lighting output; This is a MUCH Brighter bar and improves both style and safety; 11-13/16(L) x 9/16"(W) x 9/16"(H); Mounting holes spacing: 11 7/16inch approx.; operates form 9-16 Volts;

Functions: This Low-profile trailer tail light serves 3 functions on trailers over 80" wide: Stop light, Tail light, Turn signal light, Also you can use it as Center Mount Third 3RD Brake Light, Led Clearance Lights bar, Led Marker Light Bar, Led Identification light Bar, id light bar etc.;

This led trailer light bar comes with the chrome bezel, and give you a shining look on road; Wiring: White Wire is the Ground; Red Wire is the high brightness; Brown Wire is the low brightness.;

- 【Solar Panel Mount】Solar panel mounts are used to secure your solar panels array to a surface and can also be used to optimize your panel’s energy production through its angle and direction. Tilt brackets can be easily adjusted from flat to almost 90 degrees at highest position.Gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat.Especially beneficial over winter months when there is less sunlight.

-【Heavy Duty Brackets】Made out of 3mm Aluminum anodized(rust free), lightweight and reasonable sturdy,It holds up to high winds.It’s made to be bolted to the frame of a rigid panel. The flexible panel needs to be secured to the frame to be used with this brackets set.Attention:Wearing gloves protects your hands from scratching of brackets rails’sharp corners during installation.

- 【Easy to Install】Bracket rack with pre-existing holes,easy bolt-on, no-drill installation.Solar panel stand kit come with necessary fastener hardware,included 4 module bolts,4 flange nuts,6 5/16＂wing bolts, 6 5/16＂wing nuts.Be happy and DIY your solar panel mounting system.

Trailer Alignment Kit Magnet Hitch Line Up

Quickly align your hitch with the trailers

Telescoping rod extend to 42"

Fits:This galvanized swivel top bunk bracket kit was well crafted ,can be used on boat trailers that with 2 x 4 inch crossmember.

Standard 8" height,adjustable height and angle,can be easily fixed on boats and trailers.

Good quality & Easy installation & Cost-efficient!

Fully sealed waterproof cover

UV-stabilized ABS plastic housing

Poly-carbonate tinted front panel

[Premuim Material] Durable PC plastic lens & housings lights with FREE black soft rubber grommet

[Long Lifespan] Bulit in piranha LED chips in the light, it's much better than SMD chips in heat transferring and brightness

[Easy Installation] Two-wire Design includes both lead wire and ground wire for mounting to all surfaces

【MULTIPURPOSE LASHING STRAPS】 - Used for car roof rack cargo tie down, kayak canoe SUP surfboard tie down, boat trailer tow strap, luggage strap, joining beds, car roof strap for roof top carrier

【TIE DOWN STRAP & DURABLE】 - Lashing straps with delicate gear and sturdy thick strap, they grip well and work strength 300lbs, break strength 800lbs.

【EASY TO USE】 - The Reusable Tie down Straps can be adjusted and meet a variety of strapping needs. If it's too long, just tie the surplus cord into a knot so it doesn't bang against your car.

12' Tether with Carabiner

Grommet

Includes: tether, grommet, ball stop, spacers, and screws

Security cable locks and bracket suitable for secure your yeti coolers at any place, such as a truck bed, trailer, boat, kayak, tree and more other areas

Cool lock for yeti/rtic cooler, fit all ice cooler of YETI Tundra and Roadie coolers with tie-down slots, cooler lock bracket for yeti cooler also can be used with combination lock separately

6 ft enough length braided steel cooler cable lock come with is convenient to tight cooler any position you want, perfect cooler accessories for secure yeti cooler.