Best Partsam in 2026

Application: Universal for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc

15 Diodes ( 12 Red+3 Red ) LED Combination stop turn tail side marker light w/reflector-Curb side; Passenger Side Serves 6 functions: Stop light, Turn signal light, Tail light, Rear reflex reflector, Side marker light, Side reflex reflector;

19 Diodes ( 12 Red+3 Red+4 White ) LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Driver Side Serves 7 functions: Stop light, Turn signal light, Tail light, Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator;

8-5/8" x 3-7/8" Rectangle Trailer Tail light Kit serves 3 functions: stop light, turn signal light, taillight. Perfect for surface mount on CAMPER TRAILER. At the bottom of the left hand driver's side, you can see a license plate light and license plate mounting brackets built in. Red lens. White plastic base.

left hand driver's side: 27 Diodes( 22 Red++5 White ); Right Hand Passenger's Side: 22 Diodes; this light uses LEDs, which make great replacements for incandescent lights. They last about 50 times longer. They are more efficient, provide better light with less power output, and of course there's not bulbs to replace, or not brittle filaments.

It is designed to mount on the surface of a trailer and Camper etc.; there's three wires to connect. White is your ground wire, black is your taillight, and then the red is the brake and turn signal. This light is SAE and DOT approved.

Tips : How To USE: As image 4 shows, it firstly needs a mental bar or solid wooden bar that affords enough weights to hang the hoist up ceiling indoor or hanging outdoor.

Lifting Weight: 220lb.(Single-line), 440lb.(Double-line) ; Lifting Height: 38ft(Single-line), 19ft(Double-line) ; Lifting Speed: 33ft/min(Single-line), 16ft/min(Double-line);

Handle remote cord is 4.9FT ; Electric chord 5.2 FT ; Diameter of wire rope: 0.12inch ; Tensile strength of wire rope ≧ 1870N/mm2

Warning: Wires come out from the conner, NOT from the center. (Check image 2)

Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】

Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.

10' x 2" (10 feet x 2 inches) lifting sling with flat loops, 2Ply, different from other slings on the market, make your job easier with Lifting Slings. (One Sling Included)

FEATURES: 3,100 lbs. Vertical Load Capacity; 2,480 lbs. Choker Load Capacity; 6,200 lbs. Basket Load Capacity, works great with chain hoist, electic hoist, winches etc.

VERSATILE USE: These polyester web slings with flat eye to eye loop ends are versatile slings for general use; Never again will you get troubled in confusion of how to lift loads.

Package incldues 2 Pieces White 7" Round LED Backup lights with reflex lens. Screws and thick mounting gaskets are included for complete mounting.

This is a 7 Inch Round LED Reverse lights which has 36 LEDs and works great for transit vehicles, bus, utility, and dome light applications. This 7" White LED Bus Tail Light is sonically sealed and waterproof with a surface mount light with mounting gasket. With the built-in reflex, the reflector in the center of the light can be visible from a long way off. They mostly works with the 7" round LED stop tail turn lights;

This 7 inch round back-up Light is 12V DC and is hard wired with separate ground wire: white is ground, black wire is dimmer for taillight/running light, and red wire is brighter for back up/revese lights mode. NOTE: These 7" School Bus lights can be used but they do not have flashing patterns. But with a proper relay it can be a flasher;

Partsam 2 Pcs 10' x 2" (10 feet x 2 inches) lifting sling with flat loops, 2Ply, different from other slings on the market, make your job easier with Partsam Lifting Slings. (2 Slings Included)

FEATURES: 3,100 lbs. Vertical Load Capacity; 2,480 lbs. Choker Load Capacity; 6,200 lbs. Basket Load Capacity, works great with chain hoist, electic hoist, winches etc.

VERSATILE USE: These polyester web slings with flat eye to eye loop ends are versatile slings for general use; Never again will you get troubled in confusion of how to lift loads.

Partsam (2 x Amber) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens with white base. Surface mount . 2-Wire design

DOT Approved. Function as front / Rear clearance Lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Partsam (1 x Red ) Waterproof truck trailer Identification Light Bar, long-lasting stainless steel black bracket base, stainless hardware included. three-light, 3-LEDs each marker light, totally 9LEDs, Red Lens Red LED Light; This Truck Trailer ID Light bar is great for trailer applications more than 80" wide;

This red clearance light bar is sealed and waterproof. Size: 350mm x 30mm x 26mm (14.17" x 1.18" x 1.1"); Hole distance: 212mm (8.50"); Installation scews are included. This IP67 Waterproof trailer light bar is always ready for different kinds of weather attack, and also withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weathe;

EAST TO INSTALL: The red strip light bar contains a single lead wire for power and is grounded through the mounting hardware. Anyone of the three screws is the Negative and Red wire is the Positive end;

Partsam (2 x Red) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens housing with white base. Surface mount. 2-Wire design

DOT Approved. Function as front / rear clearance lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Direct Fit: for 2004 2005 2006 2007 2008 F150, 2007 2008 2009 2010 Explorer Sport Trac, 2006 2007 2008 Lincoln Mark LT; not for F-150 Heritage SVT Lightning or Explorer;

Bright Sparking LEDs: Full LED light source ensures great vision and brake/reverse indication, enhance safety during driving; LED 3rd BRAKE LIGHT REPLACE Part Number: 7L3Z-13A613-B;

IP65 Waterproof: This bake light case is padded with foam back and is perfectly sealed around. The foam gasket is designed for water-proof. As long as there is no gap between the car and the foam, water will not leak into your car;

Partsam LED headlights for vehicles with 7x6 sealed beam type headlights (also known as 5x7). Update the look of your vehicle while improving your visibility with little to no modification; Helps to reduce traffic accidents cause by bad weather or adverse road condition. Ensuring driver's safety (High beam 5600 lumens, Low beam 2500 lumens). Low beam and High beam in the same light; Durable Aluminum Shell Body and Heatsink; Easy Installation-Plug and Play.

【Compatibility】 compatible with headlights: H6054 H6054LL 6054 H5054 H6014 H6052 6052 6053 69822. Partsam LED headlamps can fit up to 95% of vehicles, including sedans, light SUV, 86-95 Jeep Wrangler JK LJ and trucks, motorcycles, 89 Chevy k5 blazer, GMC safari 93, w250 dodge, c4 corvette and off-road vehicles.

【Specification】15 Ultra Bright 3W LED Chips; Dimension: 7.87"(Length)x5.5"(Width)x2.75"(Depth); Color Temperature: 5000K-6000K; Lens Material: PMMA; Lifetime: Up to 50,000 Hours; Package: 2PCS of headlight 7x6; Warranty: 1 year.

NOT Plug and Play , this Tail Light is Hardwired and Surface Mount with screws ; White Wire - Ground; Red Wire - high brightness; Black Wire - low brightness.

Functional Attention: it works only flashing after you install used for Turn Lights; it works only with high brightness and low brightness after you install used for Brake Lights ;

Convert your old incandescent lights to more modern LEDs; LEDs are brighter and light faster, draw less current and generate less heat than incandescents.

Partsam (2xRed) 4inch Rectangle Side Turn Marker Trailer Lights - 10 Diodes

Used as Led Marker Clearance light, Auto side Lamp, clearance light, identification light, trailer Light etc.

Universal for 12V vehicles like Pickups, Trucks, Trailers, SUV van Caravan and Boat Lorry Bus Camper RV etc.

This 7x6 sealed beam type headlights is equipped with high low beam and DRL functions (High beam 6500 lumens/Low beam 5000 lumens),update the look of your vehicle while improving your visibility with little to no modification; Helps to reduce traffic accidents cause by bad weather or adverse road condition,ensuring driver's safety. if your socket is not standard, H4 9003 HB2 Wire Harness Sockets in Partsam store can help you well solve the problem, details please refer to the pictures.

How to Get Moisture Out? If there is moisture or water in the headlight, please open the ventilation breather when headlight is on, then the moisture will disappear within short time and headlights can work normally again and are as bright as before, which can make the lifespan much longer. At present only Vplus and Partsam products has this function.

Compatible with headlights: H6014 / H6052 / H6054 / 6054/H5054/H6054LL/69822/6052/6053. Vplus LED headlamps come in applications that fit up to 95% of vehicles, including sedans, light SUVs and trucks, motorcycles, and off-road vehicles.High-performance Osram LED chips,3 times brighter than original stock headlights,buit-in anti flicker hardness well solve flickering/Error Code problems.

Super Bright: 6pcs High Power Chips+HD Lens helps to focus the light in front of your vehicle,more safe. 18W/Each .

Extreme Weather Resistant: Sealed Beam design with Heavy Duty Aluminum housing ensure the light work in good performance even in fog,rain or snowy weather

Excellent Heat Disspation: Fully aluminum housing and vertical cooling fin are designed for maximum heat dispersion,efficiently prolong the lights life span

Specificatoins: This light-duty Electric Cable Hoist will lift up to 39 ft. in the air, allowing you to quickly and safely lift any load without problem. High strength carbon steel line cable. Maximum load capacity up to 440lbs/200KG. One line load 220lbs/100KG and doubble line load 440lbs/200KG. Max lift height of 38ft of single line, 19ft of double line;

Built-in Safety Braking Mechanism and Cooper Motor: With easy operate remote control panel, fully automatic hoist, requires no hand cranking. Item features automatic brake function with build-in safety braking mechanism and thermal protection device to ensure safety and will allow easy handling of the load in any position; High Quality Cooper Motor provides strong power with relative low electricity consumption;

Wireless Remote Control System: With this Wireless Control, you can operate a Hoist to lift, position, and lower the load with one person. For years, the standard Hoists went out with pendant controls, but not anymore. The main advantage of using a Wireless Remote Control for your Cable Hoist is that it eliminates the dependence on being tethered to the Hoist itself;

2 Pcs 12' x 2" (12 feet x 2 inches) lifting sling with flat loops, 2Ply, different from other slings on the market, make your job easier with Lifting Slings. (2 Slings Included)

FEATURES: 3,100 lbs. Vertical Load Capacity; 2,480 lbs. Choker Load Capacity; 6,200 lbs. Basket Load Capacity, works great with chain hoist, electic hoist, winches etc.

VERSATILE USE: These polyester web slings with flat eye to eye loop ends are versatile slings for general use; Never again will you get troubled in confusion of how to lift loads.

Super Bright: 6pcs High Power Chips+HD Lens helps to focus the light in front of your vehicle,more safe. 18W/Each. 350LM per light.

Extreme Weather Resistant: Sealed Beam design with Heavy Duty Aluminum housing ensure the light work in good performance even in fog,rain or snowy weather

Excellent Heat Disspation: Fully aluminum housing and vertical cooling fin are designed for maximum heat dispersion,efficiently prolong the lights life span

Brand : PARTSam ( Pack of 100 )

Easy to install : Universal Fit with 3/4" inch Button Side Led Marker

Decorative stainless steel bezel for 3/4" round clearance/marker lights Designed to go over rubber grommet

Partsam (Pack4) Square Trailer Clearance and Side Marker Light with Reflex Reflector - Amber

Features 2-wire, hard-wired design; The two-wire design includes the lead and ground wires to mount to any surface(Black is Ground and Yellow is Positive); Easy to install, has mounting bolt centered on the back.

Perfect replacement for trailer side marker; 2-4/5" L x 2" W x 1-1/8" D; Reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs

Package Includes 5 Pieces Cab Roof Running Light Clearance lamp Amber Covers + Base Housing + 5 Piece T10 Plug Sockets + 5 Pieces foam gaskets. LED Bulbs are NOT included;

Compatibility: Replacement for 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1983 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 F150 F250 F350 F450 F550 super duty pickup truck stock roof cab marker lights;

Covers are made of high quality ABS plastic, won't fade from exposure. Come with T10 plug socket, convenient for modifying rewiring; Soft pads included, fit for fast feet or curved roofs.

HOOKS & HANDLES: This listing includes 4 metal ratchet buckets, 4 heavy-duty hook straps and a carry bag; We use unique molding technology to ensure our handles never fall off. Coated Full Bend S hooks won't scratch your equipment and keeps it in new condition;

PERFECT FIT: This Ratchet Tie Down Straps are a perfect fit for vehicles of various sizes. At 15 ft. you're working with the perfect length to efficiently tie down large or small equipment;

SECURE YOUR EQUIPMENT: These tie downs help to preserve the condition of your vehicles & equipment by keeping them secure, in place & prevents the scratching of paint;

Partsam (5 x Red) 2" x 4" Combination bullseye Side Clearance Marker Light

Ideal for cab and sleeper panels Fits Standard 3" mounting Holes

Red LED Trailer Truck Side Marker Light Clearance Indicator Tiger Eye Lamp

The navigation lights built-in 6 LED, has longevity and low draw of LED technology. Package includes 4pcs White Boat Stern Lights

Chrome Plastic Bezel: Quality flange constructed; Durable Light Body: Durable clear plastic lens and body. Sealed IP67 Waterproof

3 inch Diameter; Suitable for marine boat, pontoon, kayak, yacht, dinghy, fish boat, sailboat, barge, bass boat, etc

Application on: 3157 3156 4114 3357A 3457A 60-3528-SMD White Hight Power LED cab be used as DRL Daytime Running Light Bulbs.

Notes: 3157 have two types of bulbs, ours is the standard 3157, not CK 3157.

Part # Cross Reference: 3047 3057 3157 3357 3457 4057 4114 4157; Color temperature: 6000K; Housing Material: Aluminum Alloy; LED source: 60-3528-SMD

Partsam transom light has longevity and low draw of LED technology applied to a round, surface mount blue light for vertical transoms. Also, it can also serve as an interior cabin or courtesy light

3 inch Diameter; 12 V DC; 6-2835-SMD; surface mount; Replaces existing stern & swim platform lights with LED lighting

Electroplate plastic bezel+PC lens: Quality flange constructed; Durable Light Body: Durable clear pc lens and body

Partsam ( 2xRed ) Super bright LED Surface Mount 15" Inch Led Trailer Tail light bar, completely sealed & waterproof. These 15 inch tail light bar hard plastic best for flat or even surfaces;

Size: 15.5" x 1.3" x 0.47" and hole distance: 14.5"; Note: This 15 inch led stop turn tail light bar is about really maybe a half inch thick, but with this little knob where the wires all come out, it's about an inch. So you'll probably need to cut out a hole to allow that to go in. And that little spot is about 9/16 inch. So you might need to have a hole saw or punch out a hole there to allow that to go and not cause any issues with that;

Each Red light bar has 11 Diodes for a Bright Performance; Polycarbonate lens is sonic welded to the housing. Applications: This led brake light strip can be perfectly used on semi trailers, cargo trailers, boat trailers, work vehicles and a wide or narrow overland vehicle requiring quality DOT rated lighting. Also you can use on heavy duty trucks like Peterbilt Freightliner Kenworth Mack Western Star etc.;

Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide; NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit;

Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only); Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications;

Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for use on trailers that may be submerged, esp.for a boat trailer. We truly test it under water for 24 hours and it is totally submersible;

Partsam 6Pcs 12v DC clear lens Amber Side Marker trailer Light Mini-Sealed LED Surface mount design; 2-1/2" x 1-1/16" Rectangle. Waterproof, LED trailer light serves as either a side marker or clearance light when properly mounted. Surface mount to trailer. 2-Wire design. Screws are not included;

These Mini Led Trailer Lights are universal. Generally people use them as clearance, side marker or identification light. We also get feedbacks from our customers using them as strobe lights by connect with the switch or relay. Also some put them on motorhome as position lights, or install them in the truck step running boards as side markers etc.

Size and Brightness: 2.54" x 1.06" x 0.7" and the center to center hole distance: 1.8"; 80 lumen each light with 2 pcs High Quality LED Diodes. So if you use it as turn signals by connecting a on/off switch, but it may not be that bright;