Best Waterproof Combo Cornering Side Marker Light Assemblies in 2026

CONVENIENT - No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.

BETTER THAN THE REST - Our lights are IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.

ATTENTION TO DETAIL- Top markings allow you to quickly orient your lights for better function and appearance, convenient wire feed notches simplify wire routing, and a single stud mounting system means install is a breeze.

Warning: Wires come out from the conner, NOT from the center. (Check image 2)

Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】

Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.

Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LEDs, outputs excellent bright 120LM light for perfect marker light.

Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, Our back wire lead is added proper glue to make it completely seal without affecting the surface mount.

Simple Installation: 2 wire connection, yellow for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.

★ LED ROCK LIGHTS - White Light, Voltage:32V; Power:9W; Flux:350LM; IP 68 waterproof; rock lights: 2.75”; More Brighter, Longer life span, It up to 50000 hours life span! This Auto Rock Lights will boost your night time driving efficiency as well as turn heads, You can see road clearly in whatever conditions, and could work at all conditions.

★ HIGH QUALITY AND PERFORMANCE - Made of LED XBD chips technology & Die cast black durable Aluminum housing With Toughed Glass and PC lens reinforced.long term use does not exist lens yellowing. durable, permanent will not fade,Waterproof shockproof,dust-proof quake-proof Rust-Proof and anti corrosion.suitable vertical fine design for better cooling,protect your car, much safer.

★ WIDELY APPLICATION IN DIFFERENT TYPES OF VEHICLES - Car, SUV,Truck, ,, Off-road, Boat deck, Sport-bikes, Cruisers, Touring, ATV/UTV etc.Widely used in car lights, off-road lights, headlight machinery, agricultural machinery, construction lights, headlight excavators, forklift lights, snow lights,Underglow Neon Lights, light armored vehicles and other vehicles with underbody lighting.

OEM Replacement

Partslink: TO2531143

OEM# 81510-0C020

Partsam (2Red+2Amber) 4inch Rectangle Side Turn Marker Trailer Lights - 10 Diodes

Used as Led Marker Clearance light, Auto side Lamp, clearance light, identification light, trailer Light etc, Can also be used as combination side marker and clearance light when properly mounted.

Universal for 12V vehicles like Pickups, Trucks, Trailers, SUV van Caravan and Boat Lorry Bus Camper RV etc.

Side Marker Signal Lights | Left Driver & Right Passenger Sides | Pair

100% Brand New in Box | Never Been Installed Before

Both Laboratory and Vehicle Tested to Ensure Highest National Safety and Fitment Standards

Partsam (2xAmber) 12V 3.9 inch LED Front Rear Marker Lights, stainless screws for installation are included.

Function as Led Marker light, auto side Lamps, clearance light, identification light, trailer Light etc.

Waterproof & Sealed Light Lens, apply for left right front rear Roof Top clearance lighting.

5 x Amber & 5 x Red; 4" x 2" Rectangle; 6 Diodes; Built-in reflex reflector removes the need for a separate reflector; Durable ABS housing with white base; Surface mount to trailer; 2-Wire design; Compatible with 12V DC systems

DOT Approved. Function as side marker lights, clearance lights or identification light, Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan Boat Trailer Marine Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Classic watermelon surface mount LED light turn/marker light, 18 high power SMD LEDs of 12V

Easy surface mount design, sealed polycarbonate lens with stainless steel bezel

Comes with 12" lead hardwired with three 0.180 bullet plugs for installation

Direct replacement - this door mirror turn signal light is designed to match the fit and function of the original light on specified vehicles

Ideal solution - reliable replacement for a light that has failed due to moisture infiltration or collision damage

Durable construction - this light is made from quality components to ensure reliable performance and a long service life

Exact fit to OEM#: 81520-02040 and 81510-02040 and Partslink#: TO2520150 and TO2521150

Meets or exceeds DOT & SAE compliance standards

Assembly includes bulbs, lens, housing, and socket

SAFE AND COMPLIANT - Our amber clearance lights are DOT FMVSS-108 compliant and meet the requirements for build quality, durability, and visibility. You can feel confident that you're installing a light that is completely safe, compliant, and legal.

STAY ON BUDGET - PC rated clearance lights are better. They produce a 180-degree arc of light, and when installed on the 45-degree corner of a truck or trailer, function as both a clearance and side marker light. Two for the price of one.

MINIMIZE DOWNTIME - The self-grounding bezel cuts wiring time in half by eliminating the need for a ground wire. It also reduces the amount of drilling required. One 1/4? hole is all that is needed to run the included power wire and bullet connector.

Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.

Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light

Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance

Designed to fit your 94 Blazer, 94-02 Pickup Truck, 94-99 Suburban or 95-99 Tahoe

Affordable, superior aftermarket lamp durable against water, debris and a variety of road conditions

OE Style: High quality side marker lens w/ housing, precise fit and meets safety compliance

Adequate in quantity: the package comes with a total of 10 pieces of LED trailer marker lights for trucks in 2 different colors, including red and amber, each color has 5 pieces, and 20 pieces of screws; The quantities and colors are sufficient for you to use and replace, and can easily meet your daily use and other requirements

Easy method to operate: we have prepared 2 pieces of screws for each trailer running light, you can conveniently and easily apply them; What's more, red is the positive electrode and black is the negative electrode, the installation can be completed by tightening the screws

Match diverse cars: these trailer marker lights are suitable as LED marker lamps, car side lamps, trailer lamps for many kinds of cars, such as trucks, trailers, horse trailers, travel trailers, boat trailers, RVs, and more

SAFE AND COMPLIANT - Our clearance lights are DOT FMVSS-108 compliant and meet the requirements for build quality, durability, and visibility. You can feel confident that you're installing a light that is completely safe, compliant, and legal.

STAY ON BUDGET - PC-rated clearance lights are better. They produce a 180-degree arc of light, and when installed on the 45-degree corner of a truck or trailer, function as both a clearance and side marker light. Two for the price of one.

MINIMIZE DOWNTIME - The self-grounding bezel cuts wiring time in half by eliminating the need for a ground wire. It also reduces the amount of drilling required. One 1/4? hole is all that is needed to run the included power wire and bullet connector.

Replace and upgrade original side marker lights. Equipped with 14pcs high power LEDs, 10X brighter than OEM Light. Direct install, plug and play.

For 2008-2013 BMW 1 Series E82 Coupe Facelift (Not for 1M); For 2008-2013 BMW 1 Series E81 Facelift (Not for 1M); For 2008-2013 BMW 1 Series E88 Cabriolet (Not for 1M).

For 2002-2005 BMW 3 Series E46 Sedan / Wagon Facelift; For 2006-2011 BMW 3 series E90 Sedan (Not for M3); For 2006-2011 BMW 3 series E91 Wagon; For 2007-2012 BMW 3 series E92 Coupe (Not for M3); For 2007-2012 BMW 3 series E93 Cabriolet (Not for M3).

[Signature Quad-Series] - Exclusive Design with High-Power Dual Color SMD LED Chips on Each Housing to Maximize Illumination

[Amber Dynamic Sequential Turn Signal] - Designed to be Visually Striking & Enhance Visibility

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

Compatibile with 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 Ford F350 F450 F550 Super Duty Trucks with dual rear wheels, part number: 8C3Z15442A 8C3Z15442B F81Z15442CA 15442 15A436 8C3Z-15442-A 8C3Z-15442-B F81Z-15442-CA

Much Brighter Than Stock Bulbs: Built-in high power 4 SMD LED chips, brighter than the original. Function as a truck bed rear side marker bumper reflector or exterior safety signal light at night. Best upgrade or replacement for factory dually side marker lights

Waterproof Design: With o-ring seals, has passed waterproof test, made of high quality PC lens, anti-scratch, no faded with long-time exposure and can adapt to all kind of extreme weather, no moisture inside after a heavy rain or car wash

✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!

✔️ DOT and SAE Compliant. Made by an ISO Certified Manufacturer using Materials that meet or Exceed OEM Requirements!

✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!

CAD-designed modules for factory fit.

Compatible with Chevy Camaro 2016-2023.

Available in amber/red, clear, and smoked lens options.

This product replaces the old or black-out side mirror marker light lenses and light bulbs, dark smoked covers perfectly match the side mirrors and make them look like a whole part all together, LEDs are brighter and easier to notice than regular halogens

Compatible with: 2008 2009 2010 2011 2012 2013 2014 2015 2016 Ford F250 F350 F450 F550 Super Duty with factory trailer towing type side mirrors, do not buy if you have non Super Duty models or aftermarket side mirrors

3000K amber for upper turn signal indicator and 6000K pure white LEDs for lower side marker running/parking light, ideal replacement for both driver and passenger LED lighting

✔️ 《 ORIGINAL EURO SPEC LOOK 》 As seen on the European models of BMWs, Unique Smoked Lens style of Cornering Turn Signal Light for your 2002-2005 BMW E46 4 Door Sedan and 5 Door Wagon. Easy Plug & Play to upgrade your 3-Series. Perfect accessory gift for BMW E46 enthusiast!

✔️《 OEM FITMENT 》 Manufactured by DEPO in Taiwan with excellent quality. Molded to fit like stock parts to meet your upgrade needs.

✔️ 《 HIGH QUALITY MATERIAL 》 Lens and housing using top-grade ABS and polycarbonate plastic. Lens offer UV and impact resistance. Housing sealed by manufacturer to offer water resistance.

Package Includes: 100 pieces of round side indicator lights, each light is built with 3 pieces of quality SMD LEDs, serving you for about 50,000 hours, low energy consumption, 60 lumens per light, which will provide strong lighting for driving at night

Reliable Material: our rear round marker lights are made of quality PC lens, light cover is sealed and sturdy, with a waterproof rating of up to IP68, which fully ensures your lights for effective uses

Wide Range of Applications: these front rear side indicator lights can be applied as common functions for trailer side marker lights, turn signal lights, tail lights, auxiliary stop tail turn lights, exterior safety signal lights and more, can be also applied as universal functions compatible with all 12V car, trailer, bus, truck, van, caravan, lorry, semi trailer, cargo trailer, boat and pickup, both the two functions can fully meet your diverse needs

✔️ 《 PERFECT CORVETTE UPGRADE 》 Easy Plug & Play Turning Signal Corner Assembly for a quick unique upgrade to your Chevy Corvette C5 and Z06. Perfect accessory gift for that Corvette enthusiast!

✔️ 《 OEM FITMENT 》 Manufactured by DEPO in Taiwan with excellent quality. Molded to fit like stock parts to meet your upgrade needs.

✔️ 《 HIGH QUALITY MATERIAL 》 Lens and housing using top-grade ABS and polycarbonate plastic. Lens offer UV and impact resistance. Housing sealed by manufacturer to offer water resistance.

Complete set, comes with both (Driver and passenger) side

Direct replacement for stock assembly

DOT approved, meets all OE specifications.

The products listed are aftermarket spare parts, and any reference to the names of the auto makers and vehicle models are solely for the purchasers to identify the applicable scope of such spare parts and are in no means used as trademarks

Compliant to applicable DOT regulations

Test fitted to ensure proper fitment

Package Includes: the package includes 30 pieces 6.4 inch side marker indicator lights, chrome bezel and mounting screws are included for easy mounting; The number and brightness of car lights are sufficient for you and family members when driving or lighting, adding a stylish overall look to your vehicle and making it eye catching

Quality Materials: the trailer marker lights made of dustproof ABS and IPX6 waterproof material, reliable, not easy to deform and break, and can keep for a long time; You can use it without worrying about breakage, maintain reliable brightness in rain or harsh environments, effectively keep your driving safe

Easy to Install: this LED marker clearance lights are hardwired with 2 wire pigtails, yellow is positive, black is negative/ ground; This rectangle LED light is surface mount and you can mount somewhere as long as the size fit, looks nice on your bumper, cab and sleeper kits, somewhere else you can imagine

✔️ 《 EURO CLEAR UPGRADE 》 Time to Upgrade your Old, Faded or even Damaged Stock Amber Lens to these Unique Clear Bumper Signal and Side Marker Assembly Set. Perfect Accessory Gift Upgrade for that S10 Enthusiast!

✔️《 OEM FITMENT 》 Manufactured in Taiwan with excellent quality. Molded to fit like stock parts to meet your upgrade needs.

✔️ 《 HIGH QUALITY MATERIAL 》 Lens and housing using top-grade ABS and polycarbonate plastic. Lens offer UV and impact resistance. Housing sealed by manufacturer to offer water resistance.