Best Ijdmtoy Side Marker Light Assemblies in 2026

Voltage:12V, color: amber yellow, power: 2W/PC, dimensions: 1 by 0.47 inches, net weight: 2g/PC. Low power consumption for longer lifespan

Each bulb has twenty-four 3014 led chips on it, 360-degree lighting angle, no blind spot, super bright brings your car a refreshed new look

Fit bulb sizes: 168, 175, 194, 2825, W5W, T10. Easy to install, just plug and play. Canbus error free, no error after installation

👍[High Quality] The HIGH FLYING side mirror are made from high quality plastic for anticorrosion and passed a strict factory QC test

👍[Priemuim Look] This HIGH FLYING side mirror is a perfect match with the original car, our lights give your beloved car a fashion style and you will get a proper fitting

👍[Compatibility] This HIGH FLYING side mirror will perfectly fit with Toyota Tacoma 2016-2022, RAV4 XA50 2019-2022, Highlander XU70 2020-2022

CONVENIENT - No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.

BETTER THAN THE REST - Our lights are IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.

ATTENTION TO DETAIL- Top markings allow you to quickly orient your lights for better function and appearance, convenient wire feed notches simplify wire routing, and a single stud mounting system means install is a breeze.

CONVENIENT - No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflex reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.

BETTER THAN THE REST - Our lights are sonically sealed and IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.

ATTENTION TO DETAIL- TOP markings allow you to quickly orient multiple lights for better function and appearance, a 90 degree plug makes it easier to install this light in tight spaces, and the light�s slightly protruded body improves its visible angle.

Mini Size Bright Light For Your Night: Each 3/4” mini side marker light comes with 3PCS SMD LEDs inside, outputs 60 lumen premium bright light to save your night. Work perfectly for 100, 000 hours lifetime

Surface Mount & 2-Wire Design: Light comes with rubber grommet for surface mount, 3/4” hole size. 9inch 2-wire leads with black for ground/negative while white for positive

Maximum Durability: Waterproof PC lens, rubber cover sealed light and putting glue sealed wire combined makes the light super durable, waterproof rate IP68. No cracks forever

Package Includes: The package will contain 3/4" 10 pcs of Amber Lights + 10 pcs of Red Lights + 10 pcs of White Lights Round Trailer Side Indicator Marker 12V DC suitable for Truck, Caravan, Bus, Pickup, RV, Lorry, etc.

High Brightness: Each Light Comes with 3 pcs of High Quality SMD LED existing 50,000 hrs for Working Life with an energy-saving bulb that gives about 60 lumens which outputs high luminous efficiency to save your life on the road.

Qualifications: Waterproof, shockproof, weatherproof, dustproof and vibration proof, come with good design sturdy and durable with high quality materials, such as silicone rubber housing and PC lens, which have no shade color.

Lights Dim Over Time, Replace In Pairs: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.

Easy To Replace: Sylvania Long Life miniature bulbs are easy to install and show instant results.

Low Maintenance And High Durability: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.

Fit Type: Universal Fit

Package Dimensions: 7.6 L X 11.2 H X 7.8 W (Centimeters)

Included Components: 1 Pair Of Side Marker Lights - Amber

Warning: Wires come out from the conner, NOT from the center. (Check image 2)

Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】

Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.

FITMENT | For 1972-1986 Jeep CJ

OE REFERENCE | 994020

OMIX 12401.01 | Side Marker Light Lens

TYC Parking / Side Marke - 18-3120-01

【Compatible】The front bumper park signal side marker lights compatible with 2011-2015 Chevy Cruze, 2016 Chevy Cruze Limited.

【High Quality】The side mirror light adopts a sealed design, waterproof IP65, scratch-resistant, long-term exposure does not fade, can adapt to all kinds of extreme weather, rain or car wash water will not penetrate it.

【Replaces OE】42334144 42334145 GM2550198C GM2551198C 95186926 95186927 GM2550198 GM2551198 REPC104506 REPC104505 335-1419L-AC(CAPA) 335-1419L-AF(NSF) 18-6094-00-1(NSF) 18-6094-00-9(CAPA)

COMPATIBLE - 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Corvette C5 Zo6 Coupe Convertible OEM lights parts# GM 16523536, 16524722 side marker lamp assembly

BUILT SOLID- IP67 waterproof, dust-proof and rust-proof construction. Come on lets face it tho, these Side Marker Lights just look Sick on a C5 Corvette!

PLUG AND PLAY- directly fit in place of your stock C5 side marker lights. Each package includes both the driver and passenger side replacement of your OEM side markers Lights.

Compatible with 2008-2017 Mitsubishi Lancer includes Evolution X, 2011-up Mitsubishi Outlander Sport, 2014-up Mitsubishi Mirage

Please note that not all Mitsu has side marker lamps, please make sure yours come with OEM side markers in order to use this product!

One pair (driver and passenger sides) dark/black smoke cover lens amber LED bulb side marker lamps (Replace OEM part# 26160-8990A)

[3X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

Exact fit to OEM#: 55156767AE, 55156766AE and Partslink#: CH2520143 CH2521143

Meets or exceeds DOT & SAE compliance standards

Unit includes lens and housing only - bulbs sold separately

100% up protection coating

OE-comparable harness with no pigtail connector for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service, quality and durability

Exact fit to OEM#: F2UZ 13200 A and Partslink#: FO2521122

Meets or exceeds DOT & SAE compliance standards

Unit includes lens and housing only - bulbs sold separately

Fitment : 1997 1996 1995 1994 1993 97 96 95 94 93 Ranger

Features : Front Amber Lens Corner Lamp , Turn Signal Light , Parking Light , Side Marker , Driver Left Side , Light Bulb Excluded

Fits OEM Part Number : F37Z 13201 A , F37Z13201A ; Fits Partslink Number : FO2520118

(Pack of 2)Working voltage: 10V~30V, Current: 0.15A, Power: 1.8W/bulb, Lumen:500lm/bulb, Width: 0.39", Length: 0.97". Each bulb has 15 pieces of 4014 led chips, 360 degree lighting angle

Features: Built-in intelligent constant current IC driver for quality performance, no polarity design, aluminum circuit board for excellent heat dissipation, low power consumption, longer lifespan

Wide application: used for dome light, map light, trunk cargo light, license plate light, side marker light, interior door light, reading light, glove box light, parking light, step/courtesy light, vanity mirror light etc.

Partsam (2 x Amber) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens with white base. Surface mount . 2-Wire design

DOT Approved. Function as front / Rear clearance Lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

ULTRA REFLECTIVE POLYCARBONATE LENS - The amber 2.5" round LED side marker uses a specially designed polycarbonate lens to reflect back direct light, allowing your tractor or trailer to be more visible at night and providing a safer driving experience for you and other drivers on the road. The round LED side marker also comes with a “TOP” orientation, designed to allow you to uniformly install multiple units, while maximizing the amount of reflectiveness from each lens.

2 IN 1 FUNCTIONALITY - Driving a tractor, trailer, truck, or any other large vehicle mandates that you drive with side marker lights and reflectors depending on the size of your vehicle. The LED clearance light comes with 13 high powered LEDs, allowing it to serve as both a reflector and clearance light that federal law requires for larger trailers. This LED clearance light is also D.O.T FMVSS-108 compliant.

WATERPROOF, SUBMERSION READY - The waterproof IP67 rated LED side markers are fully capable of being submersible. This makes the clearance light ideal for boat trailers that launch and pick up watercraft into the water.

Brand: TMH with 1 Year Premium Warranty

Pack of 50 pcs : 3/4 inch Amber Light + Amber Lens Round Bullet Miniature side marker

Brightness : 60 lumen each light with 3 pcs High Quality SMD LED 100,000hrs Lifetime

IMPECCABLE BUILD QUALITY - Made from high-quality components which are designed to withstand damage and brave all harsh climatic conditions.

HASSLE FREE INSTALLATION - In addition to the ready to mount stainless steel bracket, the kit comes will all the accessories required for installation thus making sure that the installation experience is as pleasant as possible.

WATERPROOF - With an IPX7 waterproof certification, this kit is well protected from rainfall or a dip in a puddle thus enhancing its functionality and durability.

【10Pack 3/4" Round Marker Lights】10PCS Amber 3/4'' round LED side marker light assembly include rubber grommet. Low consumption, mini size, exquisite appearance, work perfectly for 100, 000 hours lifetime.

【High-Quality Materials】Made of PC Lens and Silicone Grommet. High quality 3pcs 2835 SMD chips output strong light, maximize visibility and safety. Anti-cracking, ageing resistance. IP68 completely sealed and waterproof, dustproof, long life-span.

【12V DC Universal Side Marker Lights Assembly】Perfect for Trailer, Truck, Car, Bus, Pickup, Offroad, Wrangler, ATV, UTV, Van, Semi-trailer, Camper, RV, Boat Trailer, SUV, Caravan, Cabin Cars, Lorry, etc.

[2X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

Brand : TMH ( Pack of 20 )

Pack of 20 : 3/4" Red Light + Red Lens Round Bullet Miniature side marker LED Clearence Light Front Rear Side Marker Indicators Light for Truck Car Bus Trailer Van Caravan Boat

12v DC : Black wire is positive and White wire is negative

* 3/4inch Miniature Round Truck Clearance Marker Light, Used for clearance Lamps, side marker or identification light,Trailer Light etc.

* Cable length: 22cm(about 8.66 inches), DC12V, 3 LED lens inside of the lamp offer extreme bright light. Low consumption, high energy, long life.

* Easily mounts into standard 3/4" hole.

Superior brightness: Each light is equipped with 6PCS high-intensity 2835 SMD LED, stable output of 120LM light for perfect marker light.

Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire leads add strong glue to completely seal them without affecting the surface installation.

Easy installation: 2 wire connection, red, yellow and white for positive, black for negative. 3 steps to install: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.