Best Front Marker Light Assemblies in 2026

Voltage:12V, color: amber yellow, power: 2W/PC, dimensions: 1 by 0.47 inches, net weight: 2g/PC. Low power consumption for longer lifespan

Each bulb has twenty-four 3014 led chips on it, 360-degree lighting angle, no blind spot, super bright brings your car a refreshed new look

Fit bulb sizes: 168, 175, 194, 2825, W5W, T10. Easy to install, just plug and play. Canbus error free, no error after installation

CONVENIENT - No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflex reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.

BETTER THAN THE REST - Our lights are sonically sealed and IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.

ATTENTION TO DETAIL- TOP markings allow you to quickly orient multiple lights for better function and appearance, a 90 degree plug makes it easier to install this light in tight spaces, and the light�s slightly protruded body improves its visible angle.

Mini Size Bright Light For Your Night: Each 3/4” mini side marker light comes with 3PCS SMD LEDs inside, outputs 60 lumen premium bright light to save your night. Work perfectly for 100, 000 hours lifetime

Surface Mount & 2-Wire Design: Light comes with rubber grommet for surface mount, 3/4” hole size. 9inch 2-wire leads with black for ground/negative while white for positive

Maximum Durability: Waterproof PC lens, rubber cover sealed light and putting glue sealed wire combined makes the light super durable, waterproof rate IP68. No cracks forever

Warning: Wires come out from the conner, NOT from the center. (Check image 2)

Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】

Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.

【Compatible】The front bumper park signal side marker lights compatible with 2011-2015 Chevy Cruze, 2016 Chevy Cruze Limited.

【High Quality】The side mirror light adopts a sealed design, waterproof IP65, scratch-resistant, long-term exposure does not fade, can adapt to all kinds of extreme weather, rain or car wash water will not penetrate it.

【Replaces OE】42334144 42334145 GM2550198C GM2551198C 95186926 95186927 GM2550198 GM2551198 REPC104506 REPC104505 335-1419L-AC(CAPA) 335-1419L-AF(NSF) 18-6094-00-1(NSF) 18-6094-00-9(CAPA)

Compatible with 2008-2017 Mitsubishi Lancer includes Evolution X, 2011-up Mitsubishi Outlander Sport, 2014-up Mitsubishi Mirage

Please note that not all Mitsu has side marker lamps, please make sure yours come with OEM side markers in order to use this product!

One pair (driver and passenger sides) dark/black smoke cover lens amber LED bulb side marker lamps (Replace OEM part# 26160-8990A)

[3X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

Fitment : 1997 1996 1995 1994 1993 97 96 95 94 93 Ranger

Features : Front Amber Lens Corner Lamp , Turn Signal Light , Parking Light , Side Marker , Driver Left Side , Light Bulb Excluded

Fits OEM Part Number : F37Z 13201 A , F37Z13201A ; Fits Partslink Number : FO2520118

Partsam (2 x Amber) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens with white base. Surface mount . 2-Wire design

DOT Approved. Function as front / Rear clearance Lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

【10Pack 3/4" Round Marker Lights】10PCS Amber 3/4'' round LED side marker light assembly include rubber grommet. Low consumption, mini size, exquisite appearance, work perfectly for 100, 000 hours lifetime.

【High-Quality Materials】Made of PC Lens and Silicone Grommet. High quality 3pcs 2835 SMD chips output strong light, maximize visibility and safety. Anti-cracking, ageing resistance. IP68 completely sealed and waterproof, dustproof, long life-span.

【12V DC Universal Side Marker Lights Assembly】Perfect for Trailer, Truck, Car, Bus, Pickup, Offroad, Wrangler, ATV, UTV, Van, Semi-trailer, Camper, RV, Boat Trailer, SUV, Caravan, Cabin Cars, Lorry, etc.

[2X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

Brand : TMH ( Pack of 20 )

Pack of 20 : 3/4" Red Light + Red Lens Round Bullet Miniature side marker LED Clearence Light Front Rear Side Marker Indicators Light for Truck Car Bus Trailer Van Caravan Boat

12v DC : Black wire is positive and White wire is negative

Pack of 10 : 3/4" White Light + Smoked Lens Round Miniature Side Marker Light 12v DC

Brightness : 60 lumen each light with 3 pcs High Quality SMD LED 100,000hrs Life Time

PC lens + Waterproof + Shock Proof + Dust Proof , UL Listed Power Wire

* 3/4inch Miniature Round Truck Clearance Marker Light, Used for clearance Lamps, side marker or identification light,Trailer Light etc.

* Cable length: 22cm(about 8.66 inches), DC12V, 3 LED lens inside of the lamp offer extreme bright light. Low consumption, high energy, long life.

* Easily mounts into standard 3/4" hole.

CONVENIENT - No need to buy reflective tape AND side marker lights for your truck or trailer. Our lights combine the features of a side marker light and a reflex reflector so your vehicle can easily meet the requirements of DOT FMVSS-108.

BETTER THAN THE REST - Our lights are sonically sealed and IP67 rated which means, unlike other lights, these side marker lights are just as comfortable on your boat trailer as they are on your work trailer.

ATTENTION TO DETAIL- TOP markings allow you to quickly and properly orient your lights for optimal function of the reflectorized lens. Plus, a 90 degree plug makes it easier to install this light in tight spaces.

Superior brightness: Each light is equipped with 6PCS high-intensity 2835 SMD LED, stable output of 120LM light for perfect marker light.

Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire leads add strong glue to completely seal them without affecting the surface installation.

Easy installation: 2 wire connection, red, yellow and white for positive, black for negative. 3 steps to install: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.

【360°LIGHTING】Each 3157 amber led bulb equipped with 102 pieces high power 4014 led chips, no dark spots. These 3157 led bulbs are protected with HD projector ensures optimal visibility and stronger light penetration

【LONGER LIFESPAN】Solid Aluminum material and hollow inner body design make these amber 3157 turn signal bulbs faster heat dissipation, stable performance and longevity, lifespan can be up to 30,000 hours

【BUILT-IN DRIVER】These 4157 led bulbs amber adopts built-in intelligent IC driver ensure stable current, no radio interference. Only 1/3 energy consumption of original 3157a bulb but 5 times brighter

OE-comparable harness (no "pigtail" connector) for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service quality and durability

Partsam (5 x Red) 2" x 4" Combination bullseye Side Clearance Marker Light

Ideal for cab and sleeper panels Fits Standard 3" mounting Holes

Red LED Trailer Truck Side Marker Light Clearance Indicator Tiger Eye Lamp

OE-comparable harness (no "pigtail" connector) for hassle-free installation

OE-comparable mounting provisions ensure drop-in precise fitment

Rigorous and accelerated cycling tests to ensure product service quality and durability

✅【Pack of 20】10 x Red & 10 x Amber 3/4'' Round Trailer Side Marker Lights with rubber grommets. 12V DC voltage, mini size, flush mount.

✅【Application】Commonly used as Trailer Side Marker Lights, Clearance Lights, Turn Signal Lights, Identification Lights, Tail Lights, Auxiliary Stop Tail Turn Lights, Exterior Safety Signal Lights, etc.

✅【Universal Fit】Widely used in all 12V Cars, Trailer, Clearance Bus, Truck, RV, ATV, UTV, RZR, Wrangler, Golf Cart, Offroad, Van, Caravan, Lorry, Semi Trailer, Cargo Trailer, Boat Trailer, Pickup, etc.

✔️ 《 UNIQUE CARRERA 911 UPGRADE 》 Full LED Upgrade gives latest Porsche 911 signature style which provides a Light Bar LED with Rectangular Light box Effect!

✔️ 《 OEM FITMENT 》 Manufactured by DEPO in Taiwan with excellent quality. Molded to fit like stock parts to meet your upgrade needs.

✔️ 《 HIGH QUALITY MATERIAL 》 Lens and housing using top-grade ABS and polycarbonate plastic. Lens offer UV and impact resistance. Housing sealed by manufacturer to offer water resistance.

FITMENT | For 1972-1986 Jeep CJ

OE REFERENCE | 994020K

OMIX 12401.02 | Side Marker Light Assembly, Amber

Mini Size Bright Light For Your Night: Each 3/4” mini side marker light comes with 3PCS SMD LEDs inside, outputs 60 lumen bright light to save your night. Work perfectly for 100, 000 hours lifetime

Surface Mount & 2-Wire Design: Light comes with rubber grommet for surface mount, 3/4” hole size. 9inch 2-wire leads with black for ground/negative while red for positive

Maximum Durability: Waterproof PC lens, rubber cover sealed light and putting glue sealed wire combined makes the light super durable, waterproof rate IP68. No cracks forever

HIGH BRIGHTNESS: 194 LED bulbs uses 12pcs 4014SMD and 1pcs 3030SMD Chips. 300% brighter than stock bulbs, 6500K white provides better visibility. 360° lighting angle for allover light emission, no dark spots or shadowed areas.

LONG LIFESPAN: AUTOONE T10 led bulb adopts full aviation aluminum body, built in intelligent IC to optimize LED working temperature. Energy efficient and better heat dissipation, extend the lifespan up to 45,000 hrs.

EASY TO INSTALL: Non-polarity, plug and play. No error, no flickering after installation for 98% of vehicles. Almost 1:1 same size as halogen bulbs, providing you with a hassle-free installation experience. Note: Although built-in CANBUS, some vehicles especially German cars might still pop up error message(the 194 bulb still function)

[ COMPATIBILITY ] - Compatible for 2011-2016 MINI Cooper R60 Countryman, Compatible for 2011-2016 Mini Cooper R61 Paceman

[ 3X BRIGHTER THAN OEM LIGHT BULBS ] - Each LED front bumper side marker light built-in 36 high power SMD LED chips and form a full super brighting strip of led light. Provide at least 3 times brighter than the old side marker.

[ PLUG & PLAY ] - Simply remove original housing & replace. And then connect the plug. No modification or trimming needed.

Package includes 30 pieces 3.8" Inch Led Trailer Lights 6LED (10Pcs Amber + 10Pcs Red + 10Pcs White); free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, brake lights or backup lights, they can, but they may be not that bright;

MINIMIZE DOWNTIME - Time in the garage is time off the road. With a standard 3/4" size, no-screw grommet install, and pre-attached .180" bullet connectors, these lights install quickly and get you out of the garage and back on the road faster.

MAXIMIZE UPTIME - Finding blown marker lights on a pre-trip inspection can mean the loss of valuable time on the road. By switching to long lasting red LED lights you reduce failures, minimize service times, and keep your schedule running on time.

STAY ON BUDGET - Our red lights are PC-rated. That means it produces an 180 degree arc of light, and when installed on the 45 degree corner of a truck or trailer, functions as a both a clearance and side marker light. Two for the price of one.

TRUE PROTECTION - LEDs are the long-lasting marker light option. But if your trailer lights aren't truly waterproof, your LEDs may not be as long-lasting as you think. Fully sealed submersion IP67 rated, our amber clearance lights go the distance.

STAY ON BUDGET - Clearance and marker lights may be small, but if you're doing a major refit, the costs can quickly add up. Our single LED clearance lights are a budget-friendly option that goes easy on your bottom line without going easy on quality.

MINIMIZE DOWNTIME - Don't waste valuable time trying to figure out some complicated install procedure. These lights are surface mount ready, that means no grommets to struggle with, just two wires, two fasteners, and you're back on the road.

Package includes 20 pieces 3.8" Inch Led Trailer Marker Lights 6LED Amber Lens; free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the amber light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure;

These small thin clearance lights needs to be hooked up to a 12v power source. Flux: 600Lumens (about 20 Lumens per lamp); less than 1 Watt per light; Light Size: 75mm x 20mm x 5mm (2.95" x 0.8" x 0.2"), Light Size with Black Base: 96mm x 20mm x 10mm (3.8" x 0.8" x 0.4") and center to center distance: 3-5/16" approx.; The wire length is about 6~7 inch, and you can put them in series with speaker wire to make them longer;

Partsam Amber Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on; We also have customers asking whether they can be use as turn signal lights, they can, but they may be not that bright;