Best Dot Certified Marker Light Assemblies in 2026

【Compatible】The front bumper park signal side marker lights compatible with 2011-2015 Chevy Cruze, 2016 Chevy Cruze Limited.

【High Quality】The side mirror light adopts a sealed design, waterproof IP65, scratch-resistant, long-term exposure does not fade, can adapt to all kinds of extreme weather, rain or car wash water will not penetrate it.

【Replaces OE】42334144 42334145 GM2550198C GM2551198C 95186926 95186927 GM2550198 GM2551198 REPC104506 REPC104505 335-1419L-AC(CAPA) 335-1419L-AF(NSF) 18-6094-00-1(NSF) 18-6094-00-9(CAPA)

[3X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

Partsam (2 x Red) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens housing with white base. Surface mount. 2-Wire design

DOT Approved. Function as front / rear clearance lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Partsam (Pack4) Square Trailer Clearance and Side Marker Light with Reflex Reflector - Amber

Features 2-wire, hard-wired design; The two-wire design includes the lead and ground wires to mount to any surface(Black is Ground and Yellow is Positive); Easy to install, has mounting bolt centered on the back.

Perfect replacement for trailer side marker; 2-4/5" L x 2" W x 1-1/8" D; Reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs

Exact fit to OEM#: 33850-TBA-A02, 33800-TBA-A02 and Partslink#: HO2550127 HO2551127

DOT Certified (Passed stringent quality standards)

Assembly includes bulbs, lens, housing, and socket

Partsam (2Red+2Amber) side marker LED clearance lights, each light with 6 LEDs inside; Snap-on, replaceable, durable lens.

DOT Approved. Function as clearance Lamps, side marker or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan RV Camper Motorhome Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

5 x Amber & 5 x Red; 4" x 2" Rectangle; 6 Diodes; Built-in reflex reflector removes the need for a separate reflector; Durable ABS housing with white base; Surface mount to trailer; 2-Wire design; Compatible with 12V DC systems

DOT Approved. Function as side marker lights, clearance lights or identification light, Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan Boat Trailer Marine Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Exact fit to OEM#: 95186926, 95022428 and Partslink#: GM2550198

DOT Certified (Passed stringent quality standards)

Unit includes lens and housing only – no bulb(s)

Partsam (5 x Amber) side marker LED clearance lights, each light with 6 LEDs inside; Snap-on, replaceable, durable lens.

DOT Approved. Function as clearance Lamps, side marker or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

Partsam 2 Pieces Square Trailer Clearance and Side Marker Light with Reflex Reflector - Amber

AMBER (Orange) rectangle clearance or side marker lights.

2-4/5" L x 2" W x 1-1/8" D; Reflectorized lens; corrosion resistant; mount on stud; 2-wire; 3 LEDs

Classic watermelon surface mount LED light turn/marker light, 18 high power SMD LEDs of 12V

Easy surface mount design, sealed polycarbonate lens with stainless steel bezel

Comes with 12" lead hardwired with three 0.180 bullet plugs for installation

Package includes 4 Pieces 4 Inch Amber Oval Led Marker Lights 6 LED Diodes, Screws are included for mounting. Red on the side at the rear corner(not included) and amber at the side on the front corner. You can also have lights on the top edge both on the sides and on the front and back of the campers;

These marker lights includes 6 LED diodes each. LEDs are brighter and draw less current than incandescents; Note: These oval lights are removable. Please snap off the lens to install. When you put the screws in, please do not tight them to much or the lens will be cracked. After you snap them on, please kindly put a little silicone or some clear RTV all across the gap to help seal it just in case it leaks into the light or where the wires are. Of course, the circuit boards epoxy are sealed;

DOT Approved.Dimensions: 4" x 2" x 1" with 3" hole distance approximately. These oblong marker lights are the exact same size as the light on a camper and the built-in reflex reflector removes the need for a separate reflector. Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.;

SAFE AND COMPLIANT - Our amber clearance lights are DOT FMVSS-108 compliant and meet the requirements for build quality, durability, and visibility. You can feel confident that you're installing a light that is completely safe, compliant, and legal.

STAY ON BUDGET - PC rated clearance lights are better. They produce a 180-degree arc of light, and when installed on the 45-degree corner of a truck or trailer, function as both a clearance and side marker light. Two for the price of one.

MINIMIZE DOWNTIME - The self-grounding bezel cuts wiring time in half by eliminating the need for a ground wire. It also reduces the amount of drilling required. One 1/4? hole is all that is needed to run the included power wire and bullet connector.

【Durability】 Red 9-LED Trailer Light Bar features stainless steel black base light, sealed waterproof pc lens, corrosion resistant and well protect leds from moisture and rain drops.

【Application】 This led clearance light bar is universal for 12V vehicles: trucks, pickups, motorhome, travel trailer, boat trailer, horse trailer, camper trailer, RV, SUV etc.

【Brightness】 Output Super Bright red light, more eye-catching without glares, easy warn the upcoming car to reduce accidental risks.

Exact fit to OEM#: 4806218AD and Partslink#: CH2551126

DOT Certified (Passed stringent quality standards)

Unit includes lens and housing only – no bulb(s)

[3X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

[3X Brighter Than OEM Light Bulbs] - Built-In High Power SMD LED Chips to Brighten Up the Surrounding Areas of Your Vehicle

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

[Signature Quad-Series] - Exclusive Design with High-Power Dual Color SMD LED Chips on Each Housing to Maximize Illumination

[Amber Dynamic Sequential Turn Signal] - Designed to be Visually Striking & Enhance Visibility

[Direct-Fit Replacement] - Identical to OEM Specification. No Modification or Trimming Needed.

Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.

Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light

Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance

✔️ All of Our Items are 100% In Original Packaging! You Will Never Receive a Used Item From Us!

✔️ DOT and SAE Compliant. Made by an ISO Certified Manufacturer using Materials that meet or Exceed OEM Requirements!

✔️ Installation Made Easy on All of Our Items! Little to No Modifications needed at Best!

Exact Fit to: Partslinks #: / GM2520174 / and / OEM #: / 15199560

NSF and DOT Certified (Passed stringent quality and safety standards)

Unit includes lens and housing only. Bulbs are sold separately

Exact fit to OEM#: 68000683AA and Partslink#: CH2520144

DOT Certified (Passed stringent quality standards)

Unit includes lens and housing only - bulbs sold separately

【Fitment】: LED cab roof marker light compatible with Ram 1500 2500 3500 (2003-2018) Pickup Trucks with stock cab marker lights. Replace OEM part # 68261677AC, 55372929AB, 68261677AA, 68261677AB, 55077559AE, 55077559AC, 55077559AD.

【High Quality】: DOT-Certified, SAE-Certified. Cab marker light roof running light is made of anti-scratch PC plastic. High power led chips with a super bright lighting output.

【Easy to Install】: Direct replacement for the original cab marker light roof running light, plug and play, no modification needed. Easy to installation, just unplug the old cab roof marker light and insert the new automotive LED cab roof running top marker lights.

【Fitment】: LED side marker lights compatible with H'onda Civic 2016-2021 10th Gen Honda Civic All Models (2-door coupe/4-door sedan/4-door hatchback). Replace OEM part #33800TBAA01, 33800-TBA-A01, 33800TBAA02, 33800-TBA-A02, 33850TBAA01, 33850-TBA-A01, 33850TBAA02, 33850-TBA-A02; Replace Partslink # HO2550127, HO2551127

【High Quality】: DOT-Certified, SAE-Certified. LED side marker lamp is made of anti-scratch PC plastic. high power led chips with a super bright lighting output.

【Easy to Install】: Direct replacement for the original side marker lamp, plug and play, no modification needed. Easy to installation, just unplug the old side signal lights and insert the new automotive LED side marker lamps.

OEM Replacement

Partslink: GM2521185

OEM# 15199557

Exact fit to OEM#: 81520-AA020, 81510-AA020 and Partslink#: TO2530136 TO2531136

DOT Certified (Passed stringent quality standards)

Assembly includes bulbs, lens, housing, and socket

OE replacement turn signal light - DOT/SAE certified

Exact replacement for OEM #16526485 & #16525393

turn signal light- lens and housing

[Signature Penta-Series] - Exclusive Design with High-Power Dual Color SMD LED Chips on Each Housing to Maximize Illumination

[White Parking / Amber Turn Signal] - Designed to be Visually Striking & Enhance Visibility

[Fully Plug & Play] - Simply Remove Original Housing & Replace. Connect The Plug. Done.

Exact Fit to: Partslinks #: / FO2520171 / and / OEM #: / 3W3Z 13201 AA

DOT and SAE Certified (Passed stringent quality and safety standards

Unit includes lens and housing only. Bulbs are sold separately

【Fitment】: LED side marker lights for Fo-rd F250 F350 F450 F550 Super Duty 2011-2022, for double wheel dually vehicles only. Custom fit design to F250 F350 F450 F550 Super Duty LED fender light. Replace OEM Part Number: BC3Z15442A BC3Z-15442-A BC3Z-15442-B 15442 264286.

【6X Brighter Than Stock Light】: D-Lumina side marker light is built with 100% advanced high brightness LED chips with intensity lighting output and low power consumption, which was 6x brighter than factroy light bulbs. Cool appearance design, form a perfect focal and bright LED strip, brighter appearance on your rear end wheel fenders for safety and visibility. Direct upgrade replacement part to replace the old or broken original lamp.

【High Quality Material】: These LED side markers are DOT Certified, built-in high power 12 SMD LED chips each piece. Made of high quality ABS plastic housing and PC lens with chrome trim, Triple-Layered coating. IP67 rated waterproof and dustproof. Canbus LED control unit design, no error code.