Best Nickel Brake Fittings in 2026

Male -3 AN to 2 x -3AN Flare (JIC -3, 3/8x24 thread) with Tab T Pipe Tee Block Hose Fitting Adapter

Material: SUS304 Stainless Steel

Works with -3AN TEFLON PTFE Brake and Clutch Hose / Line, Design For Drift / Hydraulic Hand Brake application

Seamlessly drawn stainless steel with molybdenum for extra resistance against rust and corrosion

Use this coil to create 3/16 Domestic, European, Japanese, British, and adapter brake lines

Manufactured using technology to prevent kinking and to retain shape while bending

This fitting has a 5/8" barb on both sides of the fitting with a hose stop flange to keep the coupler centered in the splice connection.

Commonly used to couple or repair your radiator hose, brake booster hose, vacuum line, or any other hoses together.

Machined aluminum finish

Brake line adapter fitting is made from quality steel

Adapts -3an male to 3/16 inverted flare female and is a straight style fitting

Sold in one set of 20 pieces

★ 【Material】: Heavy Duty Brass,strong and durable. Dual couplings for joining two tubes of the same diameter(OD: Outer Diameter).

★ 【Firm And Durable】: Litorange Brass for corrosion resistance, high temperature ductility and low magnetic permeability.

★ 【Function】: Union for connecting and disconnecting two tubes more easily than with a coupling

Brake Line Fittings Kit for Inverted Flares — 19 Fittings for 3/16 Tube and 16 Fittings for 1/4 Tube — Zinc-Coated Adapter, Pack of 35

For 3/16" tube there are a total of 19 fittings (12 x 3/8"-24, 3 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18)

For 1/4" tube there are 16 fittings included (12 x 7/16"-24, 2 x 1/2"-20 and 2 x 9/16"-18)

1/8 in NPT Male to 3/8-24 in Inverted Flare Female

Brass

3/16 in Hardline

【100% QUALITY MATERIAL】：The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum.Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃).Max Working Pressure: 1000psi.

【EASY INSTALLATION】：Swivel fittings are easy to use and don't require special equipment. These new full flow swivel hose ends swivel to allow for a quick alignment of the hose after assembly.

【WIDELY APPLICATIONS】：6AN swivel hose end 6an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on.

Solid Brass Brake Line Adapter

7/16-24 To A Female 3/8-24 Inverted Flare

SAE Thread Size 7/16-24 Male, 3/8-24 Female

Fit Type: Vehicle Specific

For competition applications where reduced weight is needed, use our lightweight ProClassic Crimp-On hose ends.

Every product we design and sell at Edelbrock is tested and approved by Edelbrock engineers in a real world environment on state-of-the-art equipment.

Many different types available, including long, dual and tube styles

Corrosion-resistant brass design for a long service life

Also suitable for a broad variety of industrial and commercial uses

[Fuel hardline fitting] : Only compatible with hard tube.6AN to 3/8 inch,the thread size of the 6AN is 9/16UNF.It's fits to 3/8" OD hardline,please measure before perchase.

[Material]: Made of aluminium alloy fitting and brass ferrule.Good corrosion resistance. There is no pollution in disposal, which is beneficial to environmental protection.

[Wildly Application]: This 3/8 hardline to 6an fitting is widely used in Brake System / Air & Fuel Delivery/ Engine Modification / Oiling System / Cooling System.

❤️ Application----Special design, suitable for 3/16 inch pipe.The brake tee is easy to install without additional modification, and can directly replace old or damaged ones.

❤️Advantages: compact size design, lightweight compatibility and powerful brake tee make it more reliable. And easy to ope e.Safe Working Pressure: 1841 PSI/ 127 BAR.

❤️Excellent material----Made of high-quality alloy material, strong and durable, not easy to wear. It has the characteristics of high strength and high hardness, is not easy to break, rust-proof, corrosion- , aging- , and has a long service life.

Direct replacement

Easy installation - no special tools required to install this exhaust hanger

Durable materials - quality materials for a long service life

Material:Ss 304

Color: As The Picture Shown

Size: M10 x 1.00mm Double Diagonal Banjo Bolt

Dsnaduo 3AN AN3 Male Flare to AN4 Pipe Male Stainless Steel Brake Hose Fitting Adapter Union Connector,Brake and Clutch Adapter Fitting

Material: Stainless steel 304

Commonly used to mate AN hose ends to NPT ports and lines.

Dsnaduo 4AN AN4 Male Flare to M12x1.25 Pipe Male Stainless Steel Brake Hose Fitting Adapter Union Connector,Brake and Clutch Adapter Fitting

Material: Stainless steel 304

Commonly used to mate AN hose ends to NPT ports and lines.

✅1/4" x 1/4'' x 1/4'' Tube OD tee pneumatic connectors circuits for Truck and Trailers: Air Suspension, Brake Systems, Transmissions, Locking door and window, Seat Adustment, Instrumentation, Air Conditioning System, Horn, Wiper Motor,

✅Quick connect fittings easy to install and remove, just a simple push to connect the tube. The release ring adopts ellipse design, removed conveniently. 360°rotation, after installation, the tube direction can be changed easily.

✅Our fitting has brass body and zinc alloy ferrule. Suitable for high temperature and humid environment, corrosion resistance and a long service life.

➤ Male to male -3AN to 10mm x 1.0 thread (inverted flare）

➤ Ideal for use with brake lines, clutch lines, turbo oil feed, oil pressure, coolant, and power steering systems

➤ Premium Material: The male weld on hose adapter is made of high strength 6061‑T6 aluminum alloy material, which is tough, rustproof, and durable.

✇Male to male -3AN to 10mm x 1.0 thread (inverted flare）

✇Ideal for use with brake lines, clutch lines, turbo oil feed, oil pressure, coolant, and power steering systems

✇Premium Material: The male weld on hose adapter is made of high strength 6061‑T6 aluminum alloy material, which is tough, rustproof, and durable.

Aluminum Alloy 10AN Straight Oil Fuel Hose End Fitting Adapter

Universal application for Oil/ Fuel/ Water/ Fluid/ Air Line

Designed to match with common performance hose and hose ends

M10*1.0 mm female to M10 P1.0 mm male metric thread with 1/8'' NPT female side port hose tee fittings

Made of stainless steel 304 metarial

Easy Installation of Oil Pressure and/or Oil Temperature Sensors.

>>Male to male -3AN to 10mm x 1.0 thread (inverted flare）

>>Ideal for use with brake lines, clutch lines, turbo oil feed, oil pressure, coolant, and power steering systems

>>Premium Material: The male weld on hose adapter is made of high strength 6061‑T6 aluminum alloy material, which is tough, rustproof, and durable.