Best First2Savvv Camera Cases in 2026

The Nanuk 935 case with wheels is approved by the FAA as the maximum carry-on size - Interior Dimensions L20.5" x W11 . 3" x H 7.5" | Exterior Dimensions L22.0" x W14.0" x H9.0" | Includes 2 layer cubed foam insert with base pad and lid foam

Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling

Designed for mobility with a 2-stage retractable pull handle with quick release button and smooth rolling polyurethane wheels; Temperature range: Min -20°F (-29°C ) | Max 140°F (60°C)

Watertight with Automatic Pressure Equalization Valve

Reinforced padlock protectors

Stainless steel ball bearing wheels

Compatible with MagSafe: Features built-in magnets designed to support magnetic wireless charging

10-Foot Drop Tested: Our protective case features a scratch-resistant coating, raised shock-absorbent sides, grooved impact-resistant corners, and a raised edge for camera protection

This cute iPhone case features a tort design with a shine that gleams in the light

Pelican cases are kept watertight through the use of a tongue and groove fit and a polymer o-ring.

Pelican cases come standard with an Automatic Pressure Equalization Valve which releases built up air pressure while keeping water out.

Foam : 1.3 pound polyurethane. Foam layers: layer 1 (lid): 2.00 inch - convolute / layer 2 (base): 1.50 inch - pad / layer 3 (base): 2.38 inch - pick N pluck / layer 4 (base): 2.38 inch - pick N pluck / layer 5 (base): 2.38 inch - pick N pluck. Pelican's Pick N'Pluck foam lets you customize the interior.

Interior Dimensions L17.0" x W11.8" x H6.4" | Exterior Dimensions L18.7" x W14.8" x H7.0"| Includes 2 layer cubed foam insert with base pad and lid foam

Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling

NK-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey

Designed for iPhone 13 Pro Phone Case: Pretty and practical, this clear iPhone 13 Pro case offers the best of both worlds - statement-making style and full 360º protection

10-Foot Drop Tested: Our iPhone 13 Pro protective case features a scratch-resistant coating, raised shock-absorbent sides, grooved impact-resistant corners, and a raised camera hole bumper

Special Coating: Features a protective coating designed to combat scratches and scuffs; Coating won’t chip away or deteriorate with use

This case compatible with iPhone 12 and iPhone 12 Pro 6.1 inch 2020 release, Support Wireless Charging

Actual glitter with marble pattern on the case makes your phone different and eyes-catching

Protect your phone from scratches, bumps and other daily damage

Interior Dimensions L22.0 x W17.0 " x H12.9"| Exterior Dimensions  L25.4" x W20.0" x H14.5" | Includes a two layer padded divider insert with lid foam

Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling

Designed for mobility with a 2-stage retractable pull handle with quick release button and smooth rolling polyurethane wheels

Interior Dimensions L9.4" x W7.4" x H5.5" | Exterior Dimensions L12.5" x W10.1" x H6.0" | Includes 1 layer cubed foam insert with base pad and lid foam

Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling

NK-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey

Interior Dimensions L20.0" x W14.0" x H8.0" | Exterior Dimensions L21.7" x W16.9" x H8.5"

Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling

NK-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey

Military Grade Protection: 3in1 dual-layer case provides 365 degree full body coverage protection. Premium hybrid hard Polycarbonate (PC) + soft Thermoplastic Polyurethane (TPU/Silicone) + Tempered Glass Screen Protector. Meeting Military Standard MIL-STDll protecting your phone against up to 3m (10 feet) high drops.

Camera & Screen Protection: 0.3mm raised lip protects your camera, 1.10mm raised lip relieves impact and protects your iPhone screen against drops & cracks & surface scratches.

Material: All COOLQO PC & TPU raw materials come from Germany, Super anti-yellowing materials provide long-lasting.

The company uses international advanced equipment and ink, clear patterns, bright colors, never fade. Your iPhone 11 case is made of flexible thermoplastic polyurethane (TPU) and toughened glass.The personalized design of glass rear case makes your mobile phone more beautiful, scratch-resistant and wear-resistant,light and comfortable.

Precise cutout ensures full access to all the functions and ports for your iPhone 11; Sensitive button covers allow quick responsiveness.

FULL-EDGE PROTECTION:Raised screen edge design and reinforced corner bumpers provide thorough security for your slim device at all sides and angles. The sleek raised-lip protects features of your iPhone 11 – such as the screen, camera, and back surface – from scratches when lying flat.

[Compatibility] ONLY compatible with iPhone 14 Pro 6.1 inch 5G 2022 release. (If you won't install an accessory or receive a package with a cracked screen and lens protector, feel free to contact us via Amazon.)

[Military Shockproof Protection] This case is composed of durable hard PC back and four soft flexible TPU corner bumpers. It can effectively protect your new phone from drops, impacts and scratches. Slim light-weight design offers nice grip and solid protection that won't ruin your phone's slim build.

[Clear Stylish Floral Patterns] The clear and fashionable flower patterns allow to preserve your phone's original look without losing your own personality. Made with a unique printing technique, these patterns won't rub off, fade or smudge. Meanwhile, due to premium Thermoplastic Polyurethanes materials, the case performs well in anti-yellowing.

Compatible with iPhone XS Max 6.5 inch.Please check your cell phone model before buying.

Protect your phone from scratches, bumps and other daily damage

Material: The case is made from Flexible Thermoplastic Polyurethane (TPU) and IMD (In-Mould-Decoration) Technology. Make the Print Vivid and Never Fade.

New Combination Nanuk 930 case with Padded Dividers featuring our NEW lid organizer

The NANUK Lid Organizer is the ideal organization and convenience accessory to add to your case. The molded interior is designed to help keep your hardware, power cords and accessories entirely organized and in-view. Features include three zippered and anti-tear compartments of various sizes for lots of gear storage

Nanuk Cases are Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling

Interior Dimensions L20.5" x W15.3 " x H 10.1" | Exterior Dimensions L22.8" x W18.3" x H11.7" | Includes padded divider insert with lid foam

Waterproof (IP67 rated), dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling

Designed for mobility with a 2-stage retractable pull handle with quick release button and smooth rolling polyurethane wheels

Designed for iPhone 13 Phone Case: Pretty and practical, this case for iPhone 13 offers the best of both worlds - statement-making style and full 360º protection

MagSafe Charging Compatible: All our MagSafe-compatible iPhone 13 cases include built-in magnets designed to support MagSafe wireless charging

10-Foot Drop Tested: iPhone 13 case features a scratch-resistant, protective coating, raised shock-absorbent sides, grooved impact-resistant corners, and a raised camera hole bumper

🐄❤【Notice:】 If there has peeling after you use the phone case, please feel free to contact with us, we will resend a new one for you, no need to return it back. Since the large area of printing on each cases, peeling cannot be avoided even we check very carefully. But only just few case has this problem, not every one. please do not worry, we will take responsibility for our product, we will make sure you get the good item.

🐄【Compatibility & Professional Support】Compatible for iPhone 7/8/SE 2020/SE 3 4.7 inch Only. Support Wireless Charging.

🐄【Non-Slip Feel】Never faded or discolor. No greasy fingerprints or annoying scratches left, comfortable touching feeling.

Military Grade Protection: 3in1 dual-layer case provides 365 degree full body coverage protection. Premium hybrid hard Polycarbonate (PC) + soft Thermoplastic Polyurethane (TPU/Silicone) + Tempered Glass Screen Protector. Meeting Military Standard MIL-STDll protecting your phone against up to 3m (10 feet) high drops.

Camera & Screen Protection: 0.3mm raised lip protects your camera, 1.10mm raised lip relieves impact and protects your iPhone screen against drops & cracks & surface scratches.

Material: All COOLQO PC & TPU raw materials come from Germany, Super anti-yellowing materials provide long-lasting.

POWERCLAW LATCHING SYSTEM: The PowerClaw latching system (US Patent No. 8,297,464) used on all NANUK cases is engineered to keep your case closed during the toughest of missions. The PowerClaw clamps the case tightly closed using compressive force while the integrated slide lock prevents the case from opening during transport or when dropped. The super tough nylon construction ensures your precious items remain safely inside the case no matter where the journey takes you.

PADLOCKABLE: Every NANUK case come equipped with two padlockable hasps moulded directly into the case for superior strength. High quality TSA approved combination padlocks are available as an option to keep your items secure within your case.

Interior dimensions L15.0" x W10.5 x H6.2" L381mm x W267mm x H157mm Exterior dimensions L16.7" x W13.4" x H6.8" L424mm x W340mm x H173mm Weight (empty) 5.1 lbs | 2.3 kg Lid depth 2.1" | 53mm Base depth 4.1" | 104mm Material lightweight NK-7 resin Max buoyancy 40 lbs | 18.1 kg Temperature range Min -20°F (-29°C ) Max 140°F (60°C) Airline carry-on yes Watertight yes Warranty conditional lifetime guarantee

Specially Designed Case for iPhone 13. Come with a phone ring holder

[Alert] Before Adding to cart, please check your phone model

Protect your phone from scratches, bumps and other daily damage

Ultra slim and lightweight design that is exclusively compatible with Apple iPad 9.7 Inch 2018 6th Gen (A1893 / A1954) / iPad 9.7 Inch 2017 5th Gen (A1822 / A1823).

Automatically wakes or puts your device to sleep when the lid is opened and closed.Colors shown in pictures may slightly differ from actual product due to lighting and Camera Setting.

Tri-fold front cover that switches the cover between viewing stand and keyboard stand.The triangle stand gives you a perfect viewing angle for you to watch movies and news.

Fits 4 round filters (up to 82 mm) including a variable ND

Color coded organization to quickly help locate filters

Exterior Fabric has durable water-repellant coating plus polyurethane coating on the underside of fabric.

Compatible with iPhone 12 Pro / iPhone 12 6.1 inch [2020 Release]，Support wireless charging

Actual glitter with marble pattern on the case makes your phone different and eyes-catching

PREMIUM PROTECTION- Shock-absorbing [TPU] frame that protects against drops,Protects your device from scratches, bumps, and dings.

Our Nanuk 910 Replacement Foams are made of high-quality polyurethane foam, the multi-layered set of customizable inserts includes a pre-scored removable layer.

The pick and pluck layer consists of foam squares that can be removed in various configurations to accommodate the contents of the case.

This solution is ideal if you are seeking a quick and easy way to protect and organize your items.

Specifically designed for iPhone 13 (6.1 inch) ONLY released in 2021.

Raised edges for screen and camera will protect your cellphone against scratches and bumps without adding bulk to iPhone from daily use.

Clear Case with unique designs. The case is Clear,Lightweight,Easy Grip,Protective with fun designs. The transparency of the clear case allow to showcase the original color of the iPhone.

💜 Phone Model: Specially designed case for iPhone 13 with Witchcraft Print design.

💜 Made to Last: Every of our artworks are printed with odorless, certified scratch resistant ink and strong scratch-proof.

💜 Features: Slim cover fits well to your mobile device and make it easy to access to all ports, speakers, chargers and all features. Easy access to all ports and controls.

Display size:5.8 inches. Material:Thermoplastic Polyurethane;Polycarbonate

Compatible model: Compatible with Apple iPhone 11 Pro.

【Full Body Protection】3 In 1 Armor Construction, Inner Shell & Soft Tpu Outer Cover Shell, Offer Dual Layer Protecion, Effectively Prevents Your Iphone From Impact And Scraches.[Note: No Front Cover/ No 3Rd Part Screen Protector Included]

* Compatible with the 6.5 inch Apple iPhone 11 pro max (Released in 2019) [Wireless Charge] Compatible with wireless charger [VIVID PRINTED GRAPHICS AND COLORS]

* 【Never Fade】Premium soft TPU (Thermoplastic Polyurethanes) Rubber Gel iPhone case with IMD (In-Mold Decoration) technology design. The vivid pattern is located between outer and inner layer to avoid the design fade, scratch, peel off, smear or become blurry over time.

* 【Better Protection】Front raised edges recess your screen to protect it when placed face down, while raised lip at back higher than the cell phone camera offers a better protection.

Scratch-resistant back. BPA free Hybrid Thermoplastic, Polyurethane (TPU) and Polycarbonate (PC) material, Solid polycarbonate back, Flexible, Soft.

Raised lip edge protects the front screen and the camera, the screen of the mobile phone can avoid scratches, minimize the impact caused by falling and be safe and reliable.

Designed and printed in the USA with the highest qualities to ensure a long-lasting product while maintaining a light-weight and sleek, slim design.