Best Seven Sparta Car Cup Holders in 2026

IMPORTANT! PLEASE READ: The adapter is available in a standard-length version and a long base version. If your vehicle has deep or recessed cup holders, the long base version may fit more securely. Please refer to the quick selection guide in the product photos to determine which version will work best for you.

EXTENDABLE BASE: Insert is expandable from 2.6"-3.8" in diameter to fit many different automotive cupholders. Just twist the top of the adapter to expand or retract the base. It also works great for golf-carts, motorcycles, boats, trucks, and RV's. Our extra thick pads on the expanding base ensure the adapter stays securely in your cup holder.

RUBBER TABS SECURELY HOLD 2.8"-3.85" DIAMETER BOTTLES: The tabs are made from a proprietary material selected to make it easy to insert and remove bottles from the adapter. This ensures the adapter will not come out of your car’s cup holder when you remove the bottle to take a drink.

UPGRADE VERSION: Seven Sparta Newest cup holder expander uses a Offsetting Base to avoid the lack of space , two cup holders can be used side by side. Compatible with the gear shifter, center console lid, car dash and other center console buttons.

FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES & MUGS IN 3.4"-4": Car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and mugs in 3.4"-4" diameter.

EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Car cup holder adapter comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts.

EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Seven Sparta car drink cup holder comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts. (Vehicles Not Recommended: Rav4, Mini)

FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES AND DIAMETER 3.4"-3.8": The car drink cup holder is big enough for oversized thermoses, it also can work with most popular brands bottles and many large fast food cups in 3.4"-3.8" diameter. (not fit for Rambler 14 oz Mug)

SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car cup holder built with solid and thick plastic and the rubber tabs around the top of the cup holder hold the cup firmly in place without tipping or spilling when driving down the road.

EXPANDABLE BASE FOR DIAMETER 2.5"-3.75" CAR CENTRE CONSOLE CUP HOLDER: Seven Sparta car drink cup holder comes with a base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts. (Vehicles Not Recommended: Rav4, Mini)

SECURES TIGHTLY WITHOUT TIPPING OR SPILLING: This car cup holder built with solid and thick plastic and the rubber tabs around the top of the cup holder hold the cup firmly in place without tipping or spilling when driving down the road.

FIT MOST 32 OZ. - 40 OZ. LARGE BOTTLES & DIAMETER 3.4"-3.8": This car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and many large fast food cups in 3.4"-3.8" diameter. (not fit for Rambler 14 oz Mug)

❤【Upgraded Cup Holder Design】: Ditching the traditional single cup holder design, adopts the latest adjustable 3-blade cup holder design(Bracket height is 3.2" ),the adjustable blades hold most (2.95"~5.5" in diameter) bottles and mugs firmly,suitable for most water bottles and coffee cups. Base size adjustable from 2.3"-3.9 ", universal fit for most cylindrical car cup holder,such as vehicles, boats, motor homes, UTVs, etc.Coffee or travel mugs fit perfectly even with external handles.

❤【No Tilting or Splashing】: The car cup holder expander is made of solid, thick plastic, and rubber tabs around the top hold the cup firmly in place, preventing it from tipping or spilling over on the road.The rubber tabs are made from a proprietary material selected to make it easy to insert and remove bottles from the adapter. This water bottle cup holder features a 3-ring expandable base with a diameter range of 2.3”-3.9” to keep it firmly in place in most cylindrical cup holders.

❤【Simple Installation & A Universal Fit】: Upgraded extendable cup holder base securely fit for most cars. It's easy to install and perfectly fit, no falling off risk. Simply insert this cup holder adapter into the cup holder,hold the top and turn the knob and the base will retract or expand,prongs extend and tighten against your car's center console cup holder. Slide the upper knob to easily adjust the upper space to fit different size bottles or mug,with 3 rubber tabs for oversized bottles.

COMPATIBIE WITH DIAMETER 2.5"-3.75" CAR CUP HOLDER: The large car cup holder expander expands from 2.5" to 3.75", which can be fit in different vehicles with cup holder, such as boats, trucks and RV's. Notice: a few car models might not be adaptable, such as cup holders with unique shapes, inclined angles or with flip lids and so on. Please confirm the car models before purchase. Vehicle Not Recommended: rav4; mini; subaru outback; mazda 3; 2005 chevy colorado; Chevy S-10; 2015 Lexus RX350.

UPGRADED OFFSET FUNCTION: The new version cup holder expander has been updated as the position between the rotating base and the cup body can be adjusted by a screwdriver to make that two cup holders fit side by side and avoid affecting the use of adjacent cup holder, center console, gear shifter and car dash.

FIT FOR LARGE BOTTLES IN 3.4"- 4" DIAMETER: The cup holder expander of upgraded version works perfectly with bottles, thermoses, cups, mugs of most popular brands in 3.4’’-4’’ diameter, especially for oversized/larger one. Compatible with Yeti Mug10/14oz Yeti Rambler 20/24/26/30/36/46oz,Hydro Flasks 32/40oz, Nalgenes 30/32/38/48 oz,camelbak 32/40 oz, RTIC Tumbler 20 oz,Hydrapeak Water Bottle 32 oz/Grande 25 oz /Food Jar 18oz, Reduce 24 oz/34 oz Tumbler and so far.

Cup holder expander for keeping beverage cups and bottles secure while driving

Ideal for use in cars, trucks, SUVs, recreational vehicles such as boats, RVs, and more

Expandable base adjusts to fit into most vehicle cup holders between 2.5-3.75 inches

【ONE STEP INSTALLATION】Utilizing adjustable rubber base, the JoyTutus Cup Holder Expander could be installed in the car just by only one step, aim at the cup holder of your car, and push it, that is all. The base could adapt itself to the various shape of the cup holder.

【IDEAL FOR BOTTLES & CUPS】The special rubber tabs could be removed and installed according to your need. When it comes to large bottles, such as 32 oz Hydroflask bottles, remove these tabs could bring better experience; Meanwhile, for slimmer ones, these tabs could be useful to prevent bottles from wobbling in drive.

【WE HAVE WHAT YOU NEED】Our cup holder for car is suitable for regular car cup holder with a diameter of 2.75-3.25 inches, it also can work with most popular brands bottles of 18-40 OZ or drink cup in 3"-3.8" diameter. NOTE: Our cup holder extender is not suitable for the original cup holder that is too shallow. Please measure the diameter of the original cup holder before you make the purchase. (※Tips: Not Compatible with Yeti 14oz Mug)

【Car Cup Holder For Large Bottles】 Cup holder expander for car is big enough to hold oversized bottle, works with most popular brand of bottle in 2.7" - 4.1" and fit most 20oz - 40 oz water bottles.

【Universal Fit For Car】 Cup holder extender is expandable from 2.56"-3.93" in diameter, works good with most vehicles, UTVs, golf varts, RVs, Jeeps, trucks, etc.

【Quick Installation】 It couldn’t be easier! To install it, just insert the car cup holder adapter into car cup opening and twist the top till it totally fixed. The extra sponge pad attached on the base improve stability and prevent scratching your console cup holder.

【Easy One-Step Installation】- The JoyTutus Cup Holder Expander is designed with an adjustable rubber base for easy installation in your car. Simply aim the expander at the cup holder and insert it in. The base can adapt to various shapes of car cup holders, making installation a breeze.

【Upgraded Offset Base】- Our newest cup holder adapter features an OFF-SET long base design that fits perfectly with different types of car cup holders. It is compatible with gear shifters, center console lids, and car dashes, allowing two cup holders to be installed side by side.

【Excellent Compatibility】- The JoyTutus cup holder expander is suitable for car cup holders with a diameter of 2.75-3.25 inches. It can hold most popular brand bottles ranging from 18-40 oz, such as Hydroflask 32/40oz, Yeti 20-36oz, and Nalgene 16-40oz. (※Tips: Not Compatible with Yeti 14oz Mug)

Guarantee: Contact seller to have full refund (No Need Return) if you don't like it.

Fits 99% cars in the market, So just be assured to order

Size: 2.71 inch diameter, 0.2 inch thick. Thicker than most other Car Cup Coaster

EASY INSTALLATION: AUJEN expandable cup holder for car is easy to install. Just put the base of the expander into the original cup holder and rotate the base to fix it. You can get the work done simply in 2 steps and put your bottle into it.

EXTENDABLE BASE: Equipped with an extendable base range from 2.55" to 3.75", you can rotate the base of the AUJEN cup holder expander to suit different car cup holders. It can be set tightly on your original car cup holder.

WIDE APPLICATION: Capable of holding cups with a diameter of 2.8" to 3.8" and a handle width of ≤ 1.02", AUJEN cup holder for car is suitable for most kinds of bottles and cups. This expander can meet your various needs!

[Car Cup Holder Expender] The expandable base can adjust to fit different kinds of automotive cupholders from 2.4"-3.6" in diameter. Just twist the base of the adapter to expand or retract the base and it can be firmly fixed on the car cup holder.

[Rubber Tabs Securely Hold 2.75"-3.5" Diameter Bottles] Ciwivoki cup holder expander for car can holds 10oz/40oz Hydro Flask, Yeti, Nalgene, Contigo bottles and mugs with a diameter of 2.75" to 3.5" and a handle width of ≤ 1.22".

[4 PC Rubber TABS & Car Cup Coaster] There are 4 rubber tabs on the inner wall and a coaster at the bottom, which make the cups/bottles/mugs more stable during driving.

2U-SHAPED GROOVE-You can easily pick up the drink in our cup holder expander whether you sit on the left or right，no need to replace the cup holder seat.It is easy to remover the cup holder from the slot. And the cup holder has a base deep enough to provide great balance for your water bottle.

EASY TO INSTALL: Both the base and cup holder are made of high-quality ABS, which is sturdy, durable and easy to install. The extendable base allows the adapter to stay firmly in place. Just rotate cup holder until prongs extend and tighten against your car's center console cup holder.

FIT MOST 32 OUNCE - 40 OUNCE WIDE BOTTLES & MUGS IN 3.4"-4": Car cup holder expander is big enough for oversized thermoses, it also can work with most popular brands bottles and mugs in 3.4"-4" diameter.

【Latest Upgraded Version】Different from the traditional cup holder expander, our latest multifunctional car cup holder not only could be used as a temporary table for having meal in the car, also could be used for organizing little gadgets. With the new features, organizing your center console in tidiness, no embarrassing situation any more.

【360° Rotation Attachable Tray】 The equipped hole on the 10'' wide tray could contain an extra fast food cups. The cellphone can be placed on the slot and let the charge cable through the hole of it. When not in use, you can kindly spin the tray in 360° stable rotation to fit your position.

【Offset Long Base】 Joytutus large cup holder adapter for car adopts the OFF-SET long base design, which perfectly fits for more different types of original car cup holders. It is compatible with the gear shifter, center console lid, car dash and allows two cup holders to be placed side by side.

2-In-1 Cup and Phone Holder for Car : This 2-in-1 car cup holder with a phone holder, it can load drink bottles and mobile phones at the same time. It keep both your cell phone and drinks within reach.

Large Caliber Bottle Organizer : The inner diameter of this bottle holder is 10cm / 3.9inch. It fits different size of bottles and cups from most brands on the market. Such as coffee cups, baby bottles, cups with handle, drink bottles etc. It compatible with 21/24/32/40oz Hydro Flasks, 30/32/38/48oz Nalgenes, 20/26/30oz Yeti Rambler, 12/24oz Yeti Mug,10/20oz Yeti Tumbler, etc.

Expandable Base: Adjustable base has an expandable diameter from 6.85-10 cm/ 2.7 -3.9 inch. This allows the adapter to stay firmly in place. Just hold the base and twist the top, the base will then retract or expand.

【Extendable Base】Our cup holder insert is expandable from 2.5"-3.75" in diameter to fit many different automotive cupholders. It works great for golf carts, boats, and trucks, Our extra thick pads on the expanding base ensure the adapter stays securely in your cup holder.

【Upgrated Offsetting Base】Does not affect the use of adjacent cup holders, gear shifter, center console cover, or car dashboard. The rotating base of the cup body can be adjusted by a screwdriver to make Two cups that can be used side by side to avoid wasted space.

【Easy to Install】Just hold the base and twist the top, the base will then retract or expand（8 cushion foam pads in order not to lose balance, that can be affixed to its lower half to fill the gap between the cup holder and the car's cup opening, improving stability and compatibility）

【Upgraded Compatibility】The upgraded cup holder expander ensures a more secure fit in a wider variety of automobile cup holders. The SHORT BASE is optimized for cylindrical cup holders between 2.75 and 3.25 inches in diameter and the LONG BASE can fit into a square or recessed cup holder. Please confirm which model will fit best for you.

【Credit Card for Quick Measurement】Thanks to the size of the credit card is regulated, you can use it to quickly measure your large water bottle and car cup holder insert are fit our cup holder extender or not, which obtain the best using experience.

【Hold Most Bottles of Popular Brand】The car cup holder adapter can hold most 18-40 OZ bottles, cups or mugs, which is compatible with Yeti 20-36oz, Hydro Flask 32 40oz, Nalgene 16-40oz, Camelbak 32 40oz, Contigo, Tervis, etc.

Compatible Beverage Container: EcoNour Hydro flask cup holder for car is made to prevent your cups and bottles from falling if you hit a sudden brake! This cup holder is made of durable ABS plastic, and the base holds cups, bottles, and beverages in place.

Expandable Cup Holder: The cup holder adapter’s base fits most cars and securely holds your drinks. The big cup holder for car comes with a wide base of upto 3.2 inches and the bottle fits upto 3.8 inches, providing a snug fit for most of the car's cup holders.

Easy to Use: You don't need to spend more time placing your mug in the car cup holders. You can set your mugs, bottles, or beverages in the water bottle holder for car to prevent spilling while you are driving.

Cup holder expender: the expandable base can adjust from 2.6"-3.8" in diameter to fit different kinds of automotive cupholders. Just twist the base of the adapter to expand or retract the base and it can be firmly fixed on the cup holder of your car. Especially suitable for cars only have one cup holder.

Silicone shrapnel : The Silicone shrapnel of car cup holder insert can make cups easy to put and remove from the adapter. Ensure that the cup is fixed in the cup holder when you are driving, will not shake or fall, and avoid bottle body friction.

Phone storage box: the side of car cup holder has a mobile phone storage box that allows you to put the phone and get it in anytime. Avoid that sometimes you can not find your phone or it falls into the seat gap.

【High Quality Materials】: This cup holder expander for car is made of high quality ABS, the three fences of the upper cup holder was re-designed which improved the stability and robustness.

【2 in 1 Multifunctional Design】: The dual car cup holder can be divided into 2 cup holders by rotating the upper one. The upper cup holder expander adapter can be extended from 2.87'' to 5.9'', which can hold phone, drinks, coffee, food, snacks, cell phones and ipad, etc. The lower smaller holder can hold bottles under 20 oz.

【Adjustable Base & Stable】: By using the extendable base, it is easy to install the cup holder in different cars. The base is suitable for ROUND CUP SLOT, insert it into the car cup slot, then rotate the cup holder to extend the base diameter until it firmly installed.

[Extra Space-Improve Car Holding Options] The new upgrade car cup holder extender provides an extra space for placing things without occupying the original cup holder.You can place your beverages,food,electronic products,etc.,perfect for most cups,such as kettles,coffee cups,and effectively improve the holding options of your vehicle.

[Secures Tightly-Lengthened Base] The lengthened base that expands can be adjusted to fill the console round cup holder,so that it can be placed stably without shaking.The cup holder is equipped with a rubber sleeve to increase the stability of the cup.

[Note-Applicable Size] The car drink holder is enough to hold the bottles in daily use.The bottom cup holder fits thermos, beverage bottles/cups up to 2.8 inches in diameter.The extra extended cup holder has a depth of 2.36 inches and is not recommended for bottles larger than 17 oz or 8.5 inches to avoid tipping or spilling.

【Upgraded Offset Retractable Base】There are three holes in the phone cup holder, you can adjust the base position with a screwdriver to use two cups side by side without affecting the use of adjacent cup holders, shift lever, center console cover, etc, greatly improving space utilization. The base can be expanded between 2.5"-3.8" car cup holders. Simply twist the top of the cup holder by hand and the base will expand and retract, very stable.

【Detachable Phone Organizer】Our car cup holder adds a phone organizer on the side, which allows you to stick your phone in at any time to avoid sometimes not finding it or dropping it into the seat gap. And a different point from the ordinary models on the market is that our phone organizer can be disassembled or assembled at any time, which is a very user-friendly design.

【Rubber Tabs Firmly Hold 3.4"-4" Bottles】 The rubber tabs are made of a proprietary material that makes it easy to insert and remove bottles from the adapter. This ensures that the adapter does not come out of the car's cup holder when you remove the bottle to drink.

FIT MOST 10-64 OZ BOTTLES & MUGS - The new upgraded car cup holder expander can be be adjusted from 2.95"-5.5" in diameter. Unlike other single size car cup holders, our cup holder can be adjusted to any size you want to ensure a perfect fit to your cup/water bottle. Besides, you can even use it for your phone, food, keys, etc.

SAFER AND MORE STABLE - The three upper clips are made of thickened high quality ABS, increasing the height to 3.52" (higher than comparable products and more stable). At the same time the non-slip rubber gasket on the inside of the cup holder holds the cup securely in place so that it does not tip over or spill while driving.

UPGRADED EXPANDABLE BASE - You can get 3 extra silicone extension pads for the base extension support to fit larger cup holders (Min 2.36''-Max 3.85'' in diameter). And the knobs with raised handles make it easy to tighten the cup holder extender and the silicone pad on the expansion piece provides strong friction, which improved stability of the cup holder extender.

3️⃣ [THREE-HOLE OFFSETTING BASE] By aligning 3 different small holes, this Cup Holder Expander can be adjusted in 3 orientations - center, left and right. It won't be blocked by the center console lid, gear shifter, emergency brake and dashboard, nor will it cover the adjacent cup holder; it's available to use two car cup holders side-by-side.

📱 [USE YOUR PHONE CLOSE AT HAND] A detachable phone holder is equipped in our latest 2-in-1 cup phone holder, making your phone within reach. The soft pad and the mute sponge inside effectively eliminate bumps and shakes while driving. And a hole at the bottom allows the charging cable to pass through. Moreover, you can also place credit cards and keys in it.

🥤 [HAVE A DRINK ON THE GO] A double-U-shaped cutout design of this car cup holder expander provides effortless access to your mugs, fit your 32 to 40 ounces water bottles compatible with YETI, RTIC, Nalgene, Hydro Flask, CamelBak, and more extra large cups within 3.4” to 4.0”. A non-slip coaster is provided at the bottom of the cup holder.

NO Car Cannot Use: This car cup holder consists of two adjustable parts. Easy to adjust the size of the base up to 3.9inch max. that can fit all cars, including trucks. And it can fit the super big size bottles with the max dia. of 5.51 inch.

Ultra Stable: HorsonLife car cup holder expander can hold the cup or bottle very stablely by the built-in rubber construction which can provide great traction and flexibility. What's more, we also provide the extra cup holder coaster to enhanced stability more and mroe.

Refuse to Use Poor Material: All parts of this car cup holder are make of high quality ABS plastic and natural rubber. No unpleasant chemical odors are released, no matter how long the car is exposed to the sun. Even if the cost is high, we don't want to use inferior materials like other businesses.

【CAR CUP HOLDER EXPANDER WITH TRAY】 4 in 1 design, the car upper cup holder is suitable for normal car cup holders with a diameter of 2.87". The lower cup holder has a diameter of 3.74'' and is suitable for larger bottles, cups or mugs between 3.4"-3.7" in diameter. The U-shaped groove makes it possible to hold a cup with a handle, and the pop-up design inside the cup helps stabilize the cup so it doesn't slide around. So far compatible with Yeti, Hydro Flasks, Nalgenes and Camelbak

【DUAL CUP HOLDER EXPANDER】 Different from traditional cup holder adapters, our car cup holder extender can be used alone as a dual car drink holder, or a cup tray with big cup holder. The main cup holder can be compatible between 2.4"-3.7" diameter car cup holder, suitable for most cars

【360° ROTATING DETACHABLE TRAY FOR EXTRA STORAGE】 Tray length is adjustable 6.7-9.45 inches and holds up to 6.6 lbs (3 kg). The cellphone can be placed on the slot and let the charge cable through the hole of it. When not in use, you can kindly spin the tray in 360° stable rotation to fit your position. Car cup holder tray can be used to store food, snacks, credit cards, keys, phones, coins, etc. Removable for emergencies, it becomes a dual cup holder structure when removed

CAR CUP HOLDER EXPANDER WITH TRAY - The upper cup holder for car is suitable for regular car cup holder with a diameter of 3’’, while the lower cup holder measures 4’’ in diameter, which is for larger bottles, mugs or cups between 3.4"- 3.7" diameter, so far is Compatible with Yeti 20/26/30 oz, Hydro Flasks 32/40 oz, Nalgenes 30/32/38/48 oz and Camelbak 32/40 oz. This car cup holder in place doesn't shake, secured holds weight well in the cup holder ensure your drink within comfortable reach.

TRAY FOR EXTRA STORAGE- 360°rotating detachable tray attaches to upper cup holder and load-bearing 40lbs weight. Car cup holder tray can be utilized for food, snacks, credit cards, keys, phone, coins etc. It is detachable in case you don’t need it, after dismantling, it becomes dual cup holder structure. The U-shaped groove allows it to place a mug with a handle while the 4 rubber tabs inside the cup help stabilize the cup to prevent it from sliding.

EXTENDABLE BASE- Adjustable base expands from 2.6’’ to 3.9’’, ensuring the base is securely mounted on a variety of car cup holders and will not fall off, you can twisting it loosens or tightens the grip. The silicone pad on the expansion piece provides strong friction to ensure the stability of the cup holder extender. The cup holder expander base that expands to fill the console cup holder to fit different vehicles, such as motorcycles, boats, trucks, RV's and golf-carts.