Best Traxxas Car Kits in 2026

Proprietary Carbon-Fiber Ceramic Materials Enhance The Strength Of A Typical Ceramic Brake Pad Compound To Handle Heavier Loads

Low Dust Braking Validated Through On-Vehicle 3Rd Party Tests In Los Angeles, Showing On Average 30% Less Dust Versus Oe

Drilled and Slotted Performance Rotors For Maximum Cooling. Rotor Material: Iron

PG Plus uses materials, which perform to Original Equipment specifications or better

PG PLUS brake hardware is manufactured to precise specifications in form, fit and function

Complete the restoration of your braking system with PG PLUS hardware, the most often overlook components when it comes to a safe, reliable, smooth operating, and quiet brake job

KIT INCLUDES 8 CERAMIC BRAKE PADS AND 4 PERFORMANCE BRAKE ROTORS - This brake kit includes everything you need for a complete brake job.

LESS HEAT LONGER BRAKE LIFE - Hart Brakes drilled rotor will vent hot gasses from the pad surface, reducing heat transfer between the pad and rotor. This allows your brakes to stay cooler under extreme conditions without sacrificing performance.

REDUCE YOUR STOPPING DISTANCE - Slots create a stronger pad bite, reducing your stopping distance providing you best in class braking power.

Made in China

Package height :3.81 cm

Package length :18.034 cm

6 Piece Brake Kit Replacement: Each Rear brake kit comes with 2 heavy duty brake rotors for the back along with 4 ceramic brake pads that are built to exceed OEM Specification using quality materials for performance and long term use.

GEOMET Protected: Our rear brakes and rotors kit is made using heavy duty G3000 grade cast iron with a GEOMET coating to offer just the right balance of performance, quality and durability. It’s resistant to rust and corrosion, built to exceed OEM specifications, and can be installed without any modifications.

No Noise And Low Dust: We use a ceramic formula for our brake pads, they are shimmed, chamfered and slotted to ensure smoother, quieter braking and reduce braking noise. Our rotors are double disc smoothened and mill balanced to help prevent cracking and build up. The Brake X Pads and Rotors kit are engineered to elevate your driving experience.

【High-Quality Materials】Made of premium stainless steel for brake disc rotor screws used on Honda and Acura, these screws will never rust or wear out, durable and high strength for long term use,giving you absolute peace of mind.

【Perfect Brake Work】These screws hold the brake rotors in place when you put them back on the tire. Once the calipers/tyres are turned back on, they may be left in place or removed, for best results, apply an anti-seize lubricant for later removal.

【For Those Who Need Quality Screws】Buy with confidence that these new brake disc rotor screws meet or exceed OEM quality standards,Replaces Part# 93600-06014-0H.

Replacement for 1996 -2006 Hyundai Elantra - [1997-2001 Hyundai Tiburon]

Kit Includes: 2 Premium Grade Brake Rotors and Ceramic Brake Pad Kit

PREMIUM CERAMIC BRAKE PADS - Last longer and have a smooth quiet stopping performance that is far superior to the generic metallic pads.

Brand New Wilwood Rear Parking Brake, Pro Series Forged Dynalite, Bolt-On 12.19" Disc Brake Kit (Part # 140-9282-DR) for Both Rear Wheels. | * Only one side pictured. See the list, the diagram, and the assembly booklet below for a detail of the parts included. | * Features Drilled and Slotted Rotors with Powder-Coated Red Calipers.

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications. | * These FDL Pro Series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake.

These Big Brake kits require at least 16" diameter wheels.

The Package Length of the Product is 18.288 centimeters

The Package Width of the Product is 7.62 centimeters

The Package Height of the Product is 3.81 centimeters

All-in-One Complete Brake Kit Replacement: eLine Series Front & Rear Brake Kit comes with (4) high performance brake rotors and (8) low-dust ceramic brake pads and hardware kit.

High Performance Brake Rotors: Made of G3000 grade cast iron with zinc finish for ultimate rust protection. Built with O.E.M specifications in mind, no modification required.

Ultimate Stopping Power: Precision-drilled holes and countersunk design prevents cracking and build up, enhances ventilation and dissipates heat. Designed for smoother and quieter stopping, built for longer lasting, consistent braking performance.

【Safe Braking】Our 100% ceramic brake pads offer superior braking power, longer lifespan, noise-free braking, and exceptional vibration control for a safer driving experience. The rotors are made of premium G3000 iron castings, using the highest-grade grey iron, to ensure strength, stability, and durability. The rotors are precision-cut to 100%, with low dust and smooth finishes, resulting in smoother braking at any speed.

【Quick Selection】To ensure that the part is suitable for your vehicle application, please use Amazon's vehicle fitment tool Part Finder (located at the top of the listing on desktop and below the images on mobile) before making a purchase. Also, kindly check our "Notes" section before placing your order. Note that bundles must be returned as a complete set, and partial returns of bundles are not allowed.

【Product Content】Our kit includes a comprehensive set of brake rotors and ceramic pads, along with FREE hardware clips. The photos displayed are for general representation only, and the actual product may vary depending on the specific car model. We have a wide range of products that cover over 95% of the models on the market, satisfying almost every need.

[Perfect Fitment]: Compatible with Nissan Altima 2002-2020(2009 Coupe only; 2019 FWD only, Excludes Advance / Exclusive; 2020 FWD Only), Juke 2011-2013 All Models, Juke 2014-2017 Nismo / S / SL / SV Only , Maxima 2004-2008, Sentra 2007-2019

[Reference Number]: The A-Premium Solid Disc Brake Rotors' reference number: R-31312, R31312 + Disc Brake Pads' reference number: P-905, P905 --- Fit for Rear Left and Right, Driver and Passenger Side; Please enter your vehicle information in the top left corner of listing and check our "Special Note" before ordering

[Specification]: ROTORS: ①Material: G3000 Metallurgy, ②Mounting Bolt Hole Quantity: 5, ③Outside Diameter (mm): 292, ④Discard Thickness (mm): 8; PADS: ①Material: Ceramic, ②Thickness (mm): 14.2, ③Pad Wear Indicator Included: No

Upgrade your car to a 1" dual bore master cylinder with our quick install kit.

This kit allows you to upgrade your factory single bowl manual brake car to dual bowl manual brakes in no time

In this kit you receive the brake lines necessary to route from the new master cylinder to your factory 3 port distribution block

【Safe Braking】Our 100% ceramic brake pads offer superior braking power, longer lifespan, noise-free braking, and exceptional vibration control for a safer driving experience. The rotors are made of premium G3000 iron castings, using the highest-grade grey iron, to ensure strength, stability, and durability. The rotors are precision-cut to 100%, with low dust and smooth finishes, resulting in smoother braking at any speed.

【Quick Selection】To ensure that the part is suitable for your vehicle application, please use Amazon's vehicle fitment tool Part Finder (located at the top of the listing on desktop and below the images on mobile) before making a purchase. Also, kindly check our "Notes" section before placing your order. Note that bundles must be returned as a complete set, and partial returns of bundles are not allowed.

【Product Content】Our kit includes a comprehensive set of brake rotors and ceramic pads, along with FREE hardware clips. The photos displayed are for general representation only, and the actual product may vary depending on the specific car model. We have a wide range of products that cover over 95% of the models on the market, satisfying almost every need.

Manufactured from strong and durable material

Provides less wheel vibration

Facilitates reduced brake noise

Brand New Wilwood Complete Big Brake Front and Rear 12.19" Disc Brake Kit

Complete Brake Kit Includes: | * Forged Dynapro 6 Piston, Bolt-On Front Hub and 12.19" Disc Brake Kit (Part # 140-12946-DR) for Both Front Wheels | * Forged Dynalite 4 Piston, Bolt-On Rear Hat and 12.19" Disc Brake Kit with Parking Brake (Part # 140-10094-DR) for Both Rear Wheels | * Full Line Kit for the Front with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings | * Full Line Kit for the Rearf with 18" Steel Braided Lines, Caliper Fittings, and Brake Line Fittings | * See the lists, the diagrams, and the assembly booklets for a detail of the parts included

Fits: | * Chevrolet Bel Air: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Biscayne: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Brookwood: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | * Chevrolet Caprice: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Impala: | * 1968 without Power Disc Brakes (Single Piston Caliper)** | * 1969-1970, all** | * Chevrolet Kingswood: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | * Chevrolet Townsman: | * 1969 with Spindles used on OE Drum Brakes** | * 1970, all** | ***The rear kit fits rear ends with the "CHEVY C10" Axle Flanges and a 2.42" Axle Flange Offset (see diagrams shown) | * Approximately 90% of all these applications will have those particular axle flanges with that offset | * However, it is always better to measure your Axle Flange and Axle Flange Offset to be sure your vehicle has them***

Brand New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # FDM6466X-K7) > Currie Crate Rear Ends are designed to be a bolt-in upgrade

Includes: > Currie 9-Plus Notch-Back Rear End with 31 Spline Axles ( # CE-FDM6466X) > 9-Plus notchback heavy duty housing > 31 Spline performance axle package > Built to the stock width (57 3/8") and pinion offset specs > 57 3/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on > Heavy-duty 2 1/4" wide leaf spring pads are installed in the stock location > Housing includes all 3rd member studs installed

Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Part # 140-11389-DR) > Dynapro Low-Profile Pro-Series rear disc brake kits provide a complete solution for popular muscle car rear axle > Forged billet Dynapro Low-Profile four-piston calipers, 11" one-piece hat and rotor assemblies, and high friction pads > The neatly hidden internal shoe system provides a clean installation with superior static holding power for parking

GUARANTEED ONLY to fit vehicles in the Product Description - see below. Original design ensures proper fit and confident braking.

CERAMIC BRAKE PADS are quieter and last longer than metallic. Unique formula provides reduced noise fade and dust.

STAINLES STEEL QUALITY HARDWARE IS INCLUDED. Parts are ready to install out of the box. NO CLEANING REQUIRED. INCREASED STOPPING POWER due to improved heat dissipation. Guaranteed to perform better or equal to OE parts.

GUARANTEED ONLY to fit vehicles in the Product Description - see below. Original design ensures proper fit and confident braking.

CERAMIC BRAKE PADS are quieter and last longer than metallic. Unique formula provides reduced noise fade and dust.

STAINLES STEEL QUALITY HARDWARE IS INCLUDED. Parts are ready to install out of the box. NO CLEANING REQUIRED. INCREASED STOPPING POWER due to improved heat dissipation. Guaranteed to perform better or equal to OE parts.

Brand New Wilwood Rear Parking Brake, Pro Series Forged Dynalite, Bolt-On 12.19" Disc Brake Kit (Part # 140-7140-R) for Both Rear Wheels | * Only one side pictured | * See the list, the diagram, and the assembly booklet for a detail of the parts included | * Features Red Calipers

Fits: | * Big Bearing Ford (New Style) Rear Ends with a 3.562" x 2.000" Mounting Pattern on the Axle Flange and with a 2.50" Flange Offset (see diagrams shown in the images)

Wilwood brake kits consist of specifically engineered and matched groups of components designed to provide superior brake system performance and custom appeal over a wide range of applications | * These FDL Pro Series rear disc kits provide a complete solution for popular muscle car rear axles that require a parking brake