Best Oznium Car Lighting Products in 2026

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 6mm (about 15/64") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 6mm (about 15/64") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 6mm (about 15/64") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

EASY-SEE MODERN FINISH. UNIQUE FLUSH MOUNT BEZEL DESIGN - IDENTIFY WHICH INDICATOR IS LIT UP, EVEN WITH THE SAME COLORS SIDE BY SIDE: Most indicator lights are backlit, making it difficult to distinguish what your panel is trying to tell you when you have multiple lights of the same color side by side. We fixed this confusing problem by using COLORED ACRYLIC LENSES, then added a concave plastic lens for a curved, modern appearance that looks elegant and custom - no matter what your application.

SIMPLEST, CLEANEST PLUG-N-PLAY INSTALLATION - CUSTOMERS LOVE OUR GENEROUS 3 FEET of ZIP WIRE: Simply drill an 8mm (5/16") hole, route through the 3 FEET of 22AWG WIRE, then hook up the +/- (red/black ground) and secure it with the round nut (included). SIMPLE TWO WIRE HOOKUP means you're INSTALLED IN MINUTES and LOW POWER DRAW ensures you can INTEGRATE with YOUR CURRENT 12V D/C WIRING system with 100% peace of mind - NO FUSE UPGRADES REQUIRED!

UNIVERSALLY USEFUL - THINK LIKE MACGYVER: Of course, you'll love how these light up your instrument panel indicators like your brake light, speedometer, tachometer, gauge cluster, check engine indicator, high beam indicator, shifter lights and dashboard lights - but if you're a DIY MacGyver then you'll get a kick out of customers' ingenuity, from custom car and motorcycle lighting, to lighting up a 12v security camera power supply box, and even electric fans - the sky's the limit.

These eagle eye LED tag lights are elegant & tiny enough to be discreet during the daytime - yet bold enough to pop at night, making them perfect LED lighting to light up your trucks bar, car interior, motorcycle license plate, or any ambient interior lighting or underglow project.

Extremely low profile flush mount design. Each LED is IP68 waterproof, housed inside a tank-durable threaded aluminum housing encapsulated in ultra-tough silicone, with silicone sealing on the wires backside.

Simply drill a 11mm (about 7/16") hole, route the 3 feet of 22AWG wire, slip the LED through, twist on the 2 locking nuts, then hook up the +/- (red/black ground). Simple two wire hookup means you're installed in minutes. No fuse upgrades required!

(1) brilliant red LED plug-in USB dongle for car interior ambient lighting

Dimensions: 0.32" x 0.6" x 0.78"

Plugs into any USB port to light up surrounding areas in brilliant red

2022 NEW DESIGN 8 LIGHTING MODE Changing: ice blue, Purple, red, orange, white, blue , green, yellow

[Multiple Purpose]: Universal for all car models & wide compatibility; Suitable for various vehicles, like Car, Boat,Van, Truck, Trailer , Motorhome .Applicable for home use,wardrobes,camping,Reading.

[No Damage Installation]:Magnetic absorbing without damage & double sided adhesive tape fixing. The light is easily installed on the car ceiling by magnetic absorbing with double sided adhesive tape fixing, which doesn With magnetic, easy to install. You can install it anywhere.

💡Ultra-high brightness&spotlight:The new T10 led bulb with premium COB light source,acrylic casting of 360° light transmission lampshade,which light transmission rate can reach 92% or more.To ensure the light is full of bright colors,uniform light without dead space.Light up the interior atmosphere and keep the night driving safety.

💡Original standard: 20 PCS interior car lights with with the same standard size as the original T10 bulbs（9x23mm）,using the original standard T10 non-polarity interface,is the perfect T10 wedge-shaped bulbs original replacement: T10,152,158,159,161168175,168A,447,464,501,555,558,147,184,192,193,184,259,280,285,W5W,etc.

💡3 colors for you to choose:White,blue,red 3 different colors of LED dome light for you to choose cool modification,can be used for license plate light,dome light,map light,side marker light,trunk cargo light,turn signal light,control step light,glove box light,internal tail light bulb,etc.Enough to meet the different needs.