Best Hybrid Cases in 2026

【HIGH CAPACITY】: Can store SD/SDXC/SDHC Card x 12,Micro SD/SDHC/SDHC x 24

【WATER-RESISTANT&ANTI-SHOCK】:High quality ABS material, strong and durable.The memory card storage box sealing ring is made of advanced silicone.If your backpack is wet by rain, water resistant is the key.

【Ergonomic Locking Systerm】：The card box lock is closed firmly and can be easily opened with fingers.

Heavy-duty, water-resistant exterior material

Provides great protection and shock absorption for your lens

Mesh pocket inside lid for lens cap, body cap, etc.

Interior Size: 80 x 135mm(3.14" x 5.31")/ Exterior Size: 105 x 162mm(4.13" x 6.37"), Compatible with Lenses with diameter and height below 80 x 135mm(3.14" x 5.31") (Note: Since the lens pouch is soft and flexible, the size of lenses that can be held may be slightly larger than the interior size of the pouch)

Water-resistant exterior material (Polyester Fiber) + Foam cushion interior

Provides great protection and shock absorption for your lens

【CAPACITY】:Can store SD/SDXC/SDHC Card x 4,Micro SD/SDHC/SDHC Card x 4

【Great for upcoming Trip】:Our Memory card case doesn’t take too much space at all.It is a good gift to a friend who will to travel.

【Anti-lost, Protect memory card data】:Each slot is strictly tailored to fit the card perfectly.Prevents memory cards from dust and loss.Protect your SD,Micro SD from moisture and accidents and Keeps them organized in one place.

【HIGH CAPACITY】:Can store Micro SD Card x 10

【Credit card size】: 3.34 x 2.12 x 0.11”, Credit card size, ultra-thin and lightweight.fits perfectly in the pocket(such as pants pocket,wallet,camera bag pocket)

【Anti-lost, Protect memory card data】:Prevents memory cards from dust and loss.Protect your Micro SD/MSD/TF cards from moisture and accidents and Keeps them organized in one place.

【Compatible with】This camera lens pouch fits Sony FE 200-600mm F5.6-6.3 G OSS Super Telephoto Zoom Lens (with reversed ALC-SH157 lens hood and Sony FE 2.0x Teleconverter(SEL20TC)) or other lens size below 5.51" x 14.57".（140 x 370mm）

【Note】This camera lens case has large internal space suitable for lenses with reversed lens hood or teleconverter, but the total length of lens and accessories shall not exceed 14.6'' (370 mm).

【High Quality】Interior thickened padding and exterior water-resistant material to provides great protection from scratch, shock, rain and moisture

【HIGH CAPACITY】:Can store SD/SDXC/SDHC Card x 12,Micro SD/SDHC/SDHC/TF Card x 18,CF/Compact Flash Card x 6,SIM Tool x 1

【Anti-lost, Protect memory card data】:Each slot is strictly tailored to fit the card perfectly.Prevents memory cards from dust and loss.Protect your SD,Micro SD,SIM cards from moisture and accidents and Keeps them organized in one place.

【Compact & Portable】:5.7 x 3.3 x 0.9 inch,only 0.32lb,Comes with a carabiner,Easily put into the camera bag or hang on the backpack and camera strap

Dimension: Interior Size 4.9x11.4” (125 x 290mm), it is compatible with Canon RF 800mm f11 lens, Tamron SP 150-600mm F5-6.3 lens, Sigma 150-600mm f5-6.3 lens or any other lenses with diameter and height bellow 4.9x11.4” (125 x 290mm). Note*: The lens pouch can actually fit a bit larger lens size than the interior size because of the soft and flexible material.

Protection: The exterior features water-resistant polyester, a thick layer of high-density foam padding interior which protects the lens from scratch, shock, rain & moisture.

Security: Strong dual zippers provide easily access to the case, with small loops design allows you to lock them together for more security.

【HIGH CAPACITY】: Can store Micro SD/Micro SDHC/Micro SDXC/TF Card x 36 and SD/SDHC/SDXC x 18.

【WATER-RESISTANT & ANTI-SHOCK & ANTI-DUST】:The memory card holder is made of high quality abs material, strong and durable.and the memory card storage sealing ring is made of advanced silicone. If your backpack is wet by rain, water resistant is the key.

【Ergonomic Locking Systerm】：The memory card organizer lock is closed firmly and can be easily opened with fingers.When the card box is accidentally dropped, the lock can protect the memory card from loss or damage.

【Foldout Filter Pouch】:Our filter case is designed for lens filter, it can holder 3 round filters up to 82mm.

【Hook and Loop Closure】:The pouch features hook & loop closure for quick and easy opening and closing.Your travel will be much easier to carry the lens filter.

【Belt Loop】:Features a belt loop on the back for attaching to a belt or hanging on the camera strap.You can carry it with you wherever you are, especially for outdoor shooting and travel.

Tough&water-resistant ABS case for carrying memory cards

Each slot is strictly tailored to fit the card perfectly

Two sides both allow you store memory cards

Tough water-resistant polycarbonate case for carrying memory cards

Each slot is strictly tailored to fit the card perfectly

Two sides both allow you store memory cards

【SD Card and Battery Case】:Design for LP-E6 LP-E6N Battery,the multi-function case can store Camera batteries x 2 and SD cards x 6 to meet your needs.Suitable for Canon EOS R5C R5 R6 R 5D Mark IV 5D Mark III 5D Mark II 6D Mark II 7D Mark II 5DS 5DS R 6D 7D 80D 70D 60D Camera.

【Ergonomic Locking Systerm】:The battery box lock is closed firmly and can be easily opened with fingers.High quality PC shell, sturdy and durable.

【Water-Resistant & Shockproof】: Made of premium and eco-friendly material,silicone seal ring,the battery case can effectively protect your camera battery and memory cards from dust, shock, dirt and water splashing.

Tough water-resistant polycarbonate case for carrying memory cards

Each slot is strictly tailored to fit the card perfectly

Two sides both allow you store memory cards

[Capacity]: This memory card case can hold up to 8 Micro SD/Micro SDHC/Micro SDXC/TF Cards and 4 SD/SDHC/SDXC Cards neatly and tightly. (*Attention*: Please feel free to contact us if your receive the wrong item.)

[Protection]: The external of this SD card case is made of high strength ABS, protect your cards from dust, moisture & water-splashing. Inside it consists of molded EVA foam where memory cards can be safely kept in specific compartments and reduce shock.

[Snap Closure]: The snap closure provides a weatherproof seal for better protecting your cards from dust and water.

Case Capacity: It can store 12 SD/SDHC/SDXC, 18 Micro SD/TF and 6 CF/Cfast memory cards neatly and tightly.

Protection: The external is made of high strength ABS, protect the cards from dust, moisture & water-splashing. Inside it consists of molded TPU rubber where memory cards can be safely kept in specific compartments and reduce shock.

Snap Closure: The snap closure provides a weatherproof seal for better protecting your cards from dust and water.

【Large capacity, Easy to store】：8 Pockets,The filter pouch holds 6 round or square filters up to 82mm (37mm 40.5mm 43mm 46mm 49mm 52mm 55mm 58mm 62mm 67mm 72mm 77mm )and 2 round or square filters up to 77mm.

【Easy to Access】：The filter pockets adopt clear soft plastic.

【Protective】：Quality Neoprene，provides great protection and shock absorption for your lens.

Handy polyester battery pouch keeps all of your batteries from making accidental shorting contact with each other in your gear storage bag/case.

With two zippered pocket to store 4 SD/Micro SD/TF/XQD/CF memory cards.

Easy to carry: The Velcro fastener tape on the back of the pouch for easily attach it to your belt or camera strap.

【12 Slots HIGH CAPACITY】:Can store SD SDHC SDXC Card x 12

【Anti-lost, Protect memory card data】:Each slot is strictly tailored to fit the card perfectly.Prevents memory cards from dust and loss.Protect your SD from moisture and accidents and Keeps them organized in one place.

【Compact & Portable】:5.6 x 3.2 x 1 inch,only 0.15lb,Comes with a carabiner,Easily put into the camera bag or hang on the backpack and camera strap.

Fits a camera (with lens) up to 113 x 66 x 39mm / 4.4" x 2.6" x 1.5" (W x H x D), specially designed for compact cameras, slim and chic

2 extra pockets for carrying your battery, memory card or card reader

Made of soft and elastic neoprene

Tough water-resistant polycarbonate case for carrying memory cards

Each slot is strictly tailored to fit the card perfectly

Two sides both allow you store memory cards

Made of comfortable and durable neoprene material, soft, small and lightweight

Dust, dirt, scratch & bump protection during travel and storage

1 pocket inside for battery storage and 1 zippered pocket outside for small accessories storage such as memory card, card reader, etc.

【CAPACITY】:Can store Micro SD/Micro SDHC/Micro SDXC/TF Card x 12,SD/SDXC/SDHC Card x 6.

【Transparent Window Design】:The transparent window allows you to see the status of cards at any time and any place.The double-sided storage part features custom fit molded card slots to protect your cards better.

【Anti-Slip Design】:The anti-slip design on both sides makes it attractive and prevents the case from accidental sliding while pulling out the storage part.

The battery case can store up to 6 lithium-ion camera batteries below 1.5x0.9x2.4”, such as Canon LP-E6, LP-E6N, LP-E6NH, BP-511, Nikon EN-EL3e, EN-EL14a, EN-EL15, Sony NP-FZ100. Fujifilm NP-W235, NP-W126, Panasonic DMW-BLF19, DMW-BLK22 battery and more. (Note* not fits for Sony NP-FW50)

It holds up to 6 SD/SDHC/SDXC cards, 16 Micro SD cards, 3 CFexpress Type A cards and 2 XQD/CFexpress Type B cards. It neatly holds the memory cards snugly in place within the EVA slots.

The external is made of durable ABS, protects the camera batteries/memory cards from dust, moisture & water-splashing. The EVA interior of the lid features customized card slots for keeping memory cards organized. Inside it consists of pre-cut EVA foam where camera batteries can be safely kept in specific compartments and prevents accidental contact.

Dimension: Stores a lens or accessory up to 2.4x 1.6" (62 x 40mm), it is compatible with Canon EF-M 22mm f/2, Sony E PZ 16-50mm f/3.5-5.6 or Fujifilm XF27 f/2.8 Lens and more.

Protection: The lens pouch features anti-abrasive, water-resistant neoprene, 0.2” (5mm) thickness which protects the lens from scratch, light impact & moisture.

Fold-over Closure: A fold-over closure makes the lens pouch easy to open and close while preventing dirt and dust from reaching your lens. It’s held together with a touch fastener for keeping your lens securely in the case.

JJC MC-MSD16 Memory Card Case

Rugged waterproof design

Extremely strong water-resistant polycarbonate resin materials

Dimension: Stores a lens or accessory up to 3.5 x 5.9" (89 x 150mm), it is compatible with Canon RF 24-240mm f4-6.3, Canon EF-S 18-55mm f3.5-5.6, 55-200mm f/4-5.6G lens and more.

Protection: The lens pouch features anti-abrasive, water-resistant neoprene, 3.5mm thickness which protects the lens from scratch, light impact & moisture.

Drawstring Closure: The lens pouch features a simple pull-cord closure for retrieving and storing your lens while preventing dirt and dust.

【Capacity】The lens filter pouch provides a secure and convenient storage solution for four circular filters up to 82mm. *Note: The filters are not included.

【Durable】The exterior of the lens filter case is made of high quality polyester material for durability as well as dustproof. Great to store and protect your lens filters.

【Protection】Filters are placed within one of four padded elastic pockets for better protection. Foldable design and handy size 8.3x4.1x1.0” allows you to throw it into your camera bag.

【Capacity】The filter pouch provides a secure and convenient storage solution for up to 10 circular 95mm filters. *Note: The filters are not included.

【Durable】The case’s exterior is made from high quality EVA material for sturdy and durability. Great to store and protect your lens filters from dust, shock, and water splashing.

【Protection】Filters are placed within one of ten separate microfiber-lined pockets for better protection. Size 6.0x5.1x2.7”allowas you to threw it into your camera bag.

Heavy-duty, weather-resistant material

Protective interior padding

Weather-resistant zippers with pulls