Best Rekluse Clutches in 2026

Allows for the operation of various pulleys, and drive belt accessories, with the use of a single belt

Creates a secure point of contact with the pulley, which allows for traction

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional

Fitment: Compatible with Ford, GM, Chrysler & Jeep, fit for 4.3L, 5.0L, or 5.7L GM pick up (van, mini-van, or SUV). (Kindly note: please make sure the size you need before purchase)

7 Driving Wrenches Sizes: 7/8", 32mm, 36mm, 40mm thin and 47mm size to fit Ford 6.0L and 6.4L Powerstroke diesel pickup. 1-7/8" and 2" are also included in the set.

Easy to Use: Just slip the tool into the air hammer select the correct wrench size for the fan nut and a couple of pops of the air hammer and the fan clutch is loose. No need for any other special pinning tools. (Note: Air Hammer is NOT included)

Restore A/C compressor clutch function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

REPLACE A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors; GM R4 and A6, HR-6, DA-6 and V A/C compressors; sander compressors SD 505, 507, 575, 708, and 709; Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models; Check vehicle owner’s manual for a list of compatible compressors

EASY TO USE: Keep all threads clean and well-oiled; Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing); Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece); Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley

BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity; Resists rust and corrosion with proper care and lubrication; 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches

Durable Material: This 32mm & 36mm fan clutch removal tool is constructed from premium high strength steel, which has strong hardness and not easy to be broken or bent. There is a layer of rubber in the middle part, rust-proof and does not hurt your hands.

Automotive Fan Clutches: The ATPEAM 32mm & 36mm fan clutch wrench removes lock nuts on temperature-dependent thermo-viscous fans, one wrench with two size make the work easier.

Easy to Use: Place the wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.

REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans; The holder bar keeps the water pump pulley in place while loosening the radiator fan

FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54; Also compatible with some Ford, GM, and Chevy models; Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves

BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity; 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue

【APPLICATION】B A/C Compressor Clutch Remover Installer Puller Tool Kit, is used to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors and fit for GM, fit for Ford, fit for Chrysler, imports, and others

【EASY TO USE】Keep all threads clean and well-oiled; Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing); Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads

【HIGH-QUALITY】A/C Compressor Clutch Remover is made of stainless steel with a black coated finish, durable and long lasting; Resists rust and corrosion under proper care and lubrication

Quiets noisy cooling fans with stuck fan clutches, restores fuel economy

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

leading manufacturer of high-quality products

international renown for our diverse range of award-winning products

fully equipped with state-of-the-art technology

【OEM Fit & Replace】Compatible for Chevy [4.3-6.6L V6V8] Engine, 1999-2010 Silverado 1500-3500(HD), 1996-2013 Tahoe/Suburban, 1996-2005 Astro/Blazer/S10, 1996-2016 Express/1996-10 C(K)1500-3500. Interchange: 22149877, 15073014, 22149894, 15022299. Please Use Amazon Part Finder to Ensure Application.

【Severe Duty Fan Clutches】Severe Duty clutches will lock up 70-90% of the shaft speed when engaged, [APPLY to the fan blade with a pitch of 2 ½” or over]. If the wrong type of fan clutch is installed, the fan may spin freely, cause poor cooling or too noisy, and result in reduced mileage, or fan clutch failure.

【Real OE-Standard】All VIPCAR Fan clutches applied denser & deeper radiating finned design to ensure performance, manufactured by ISO/TS16949 certified OE Supplier, made in accordance with international automotive spare parts production specifications, so as to reduce noise, improve engine economy, and protect the engine from overheating. Real Meet or Exceed OE Standards.

Restore A/C compressor clutch function

GM-recommended replacement part for your GM vehicle’s original factory component

Offering the quality, reliability, and durability of GM OE

Replacce Part Number:15-4709,12476085,20906283,20906283. Replace A/C compressor clutch kit replacement for GM LQ4 parts with clutch, coil, & pulley.

Restores A/C function for vehicles with durability & quality assurance.

Air conditioning compressor clutch assembly kit. Enhanced performance featuring reliable A/C compressor clutch technology.