Best Stainless Steel Commercial Entry Doors in 2026

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Passage/Closet" variety is used in applications where the lever is unlocked on either side.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Classroom Function" variety is commonly used in school classrooms. The exterior lever is placed in the locked or unlocked position with the key. Set the exterior lever to be either locked or unlocked using the key. The interior lever is always free for emergency egress at all times.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Storeroom Function" variety is commonly used on storerooms and mechanical rooms. When the door is closed, it is always locked (rigid) from the outside and requires a key to open. Door is always open from the inside for emergency egress.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Privacy/Bathroom Function" variety involves locking the outside lever by pushing a button on the inside and unlocking it from the outside by using a flat object (coin or screwdriver) to turn the button for emergency entrance. Also, turning inside lever or closing the door will release the button. The inside lever is always free for immediate egress.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Entrance/Keylock" variety involves Turn/push-button locking: push-button locks the outside lever until it is unlocked by key or by turning the inside lever. Pushing and turning button locks outside lever, requiring use of a key until the button is manually unlocked. Interior lever is always free for emergency egress at all times.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from LYNN HARDWARE are available for specific entrances. This "Entrance Keylock w/ Clutch" variety has Push/Turn Entry Function w/ built-in clutch (Vandal resistant with free-wheeling clutch lever mechanism (when door is locked, outside lever freely rotates--while staying locked-- so vandals can not break the lever to gain access)

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from CLG HARDWARE are available for specific entrances. This "Entry Function w/ BUILT-IN CLUTCH" vandal resistant with free-wheeling clutch lever mechanism. The outside lever rotates freely while the door is locked, making it impossible for vandals to break the lever and get in.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from CLG HARDWARE are available for specific entrances. This "Entrance/Keylock Function" requires turn/push-button locking: push-button locks the outside lever until it is unlocked by key or by turning the inside lever. Pushing and turning button locks outside lever, requiring use of a key until the button is manually unlocked. Interior lever is always free for emergency egress at all times.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from CLG HARDWARE are available for specific entrances. This "Storeroom Function" variety is commonly used in storerooms and mechanical rooms. When the door is closed, it is always locked (rigid) from the outside and requires a key to open. Door is always open from the inside for emergency egress.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.

FUNCTION: Commercial lever door knobs with locks from CLG HARDWARE are available for specific entrances. This "Passage Function" variety has both levers that are always unlocked.

COLOR & SIZING:  Our commercial door locks are offered in Satin chrome and aluminum finish (26D finish). Designed for 1-3/8" to 1-3/4" (35mm to 44mm) doors, they fit 1-1/2" to 2" thick doors and come standard with a 2-3/4" backset. These are non-handed commercial door levers, so they are suitable for either right- or left-handed doors.

SPECIFICATIONS: Our door hardware & locks come with standard ANSI 4-7/8" x 1-1/4" square corner strikes and 1-1/8" x 2-1/4" square corner faceplates. The backset is 2-3/4" (70mm), the stainless steel Roses are 3-3/8" (90mm) in diameter, and Latchbolt Stainless steel is 1/2" (12.5mm) throw standard. These specifications make our door lever handle lock fitting for 161 door prep & regular 2-1/8″ bore prep.