Best Gold Computer Cases in 2026

Combining innovative cable management, concentrated airflow, and proven CORSAIR build quality, the 4000D is a fitting choice for an immaculate high-performance PC.

The CORSAIR RapidRoute cable management system makes it simple and fast to route your major cables through a single channel, with a roomy 25mm of space behind the motherboard for all of your cables.

Includes two CORSAIR 120mm AirGuide fans, utilizing anti-vortex vanes to concentrate airflow and enhance cooling. Motherboard will fit in our 4000 Series cases without any issue. Mini-ITX, micro-ATX, ATX, and E-ATX form factor motherboards are all supported.

Cooler Master’s First MAX: The MAX line delivers tailor-made building platforms with maximum performance and hardware compatibility.

Custom 280mm Radiator: A custom 280mm radiator, two pre-installed SickleFlow PWM 140mm fans, and a highly acclaimed 3rd gen Cooler Master pump or CPU block provides reliable cooling for the CPU.

SFX 80 Plus Gold: NR200P MAX implements a 850W Gold certified PSU with custom length textured 16 AWG cables specifically designed to cover all performance needs.

Mid-tower with support for EATX motherboards featuring a metal chassis and panels with custom TUF gaming spatter pattern and 4mm-thick smoked, tempered-glass full view side panel

Keep your cool with three 120mm aura Sync rgb-illuminated fans, one 140mm rear PWM fan, and up to seven optional fan-mounting points

Custom Liquid Cooling ready with support for top or front mounted 360mm radiators, rear mounted 140mm radiator, and pre-drilled water pump/reservoir mounting holes

Panoramic Views: No corner pillar. The Y60 features a 3-piece panoramic tempered glass design for the ultimate photo and display potential. See your build the way it was meant to be seen from the left or right side of your desk with a simple turn.

Exclusively Vertical GPU Mounted: Why would you want to see your graphics card any other way.

Included PCIE 4.0 Riser Cable: A protective riser cable canopy integrates beautifully into the case, allowing for half-height PCIE cards behind the throne of the vertical graphics card. The protective shroud is the first of its kind, made specifically for the Y60.

【Large Capacity】CASE ONLY! (Adapters and electronic accessories are not included). Charger organizer travel case for organizing small electronics accessories, like macbook power adapter, power bank, cables, mouse, earphone, USB flash disk, SD card, hard drive, etc. Keep all your computer accessories organized. External dimension: 9.12 x 5.57 x 2.43 inch.

【Premium Material】Macbook charger case made of PU material and high-quality durable EVA sturdy shell keeps your mac book charger and small electronics accessories protected. Soft liner bubble protects your macbook air pro power adapter and apple magic mouse 2 from getting scratches.

【Unique Design】Multiple mesh pockets of different sizes for other smaller electronics accessories like USB cords, cable, magnetic charging cable, usb-c hub, sd memory cards, earphone, flash drive etc. Elastic holder for apple pencil or tablet pen. Don’t worry about anything being destroyed, everything stays put and well organized. Sturdy and smooth double zipper design allows open and close easily.

【Powerful Cooling System】Mid-Tower Computer Case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent air performance at the same time, keep cooling. And GIM PC Case supports,ATX, Micro-ATX and Mini-ITX motherboards.

【More Space】GIM Mid-Tower Chassis has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 2 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard;10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm.

【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve air performance. Mid tower gaming PC Case is equipped with 1pcs dust filter , and the top magnetic strip dust filter protects the case.

Amazing Remote Control - MUSETEX MN6 comes with its own ARGB fan remote control. You can easily control the fan speed, ARGB color mode and brightness. And the coolest features that other brands can't let you experience - let the light sync with your music by turning on the music mode. The color of the ARGB fan changes with the sound of your music or game, and enjoy the fusion of visual and auditory pleasure!

6 ARGB Fans - The MN6 case comes pre-installed with 6 ARGB fans, providing superior cooling performance. The more powerful ARGB comes in 16.8M colours and is motherboard SYNC with the MUSETEX dedicated ARGB control board pre-installed in the case. More color and fun can be to play with than normal RGB!

Brilliant Customizable Lighting - Addressable ARGB LEDs controlled with 3 methods. 1.Remote Control: MN6-B PC Case is equipped with a unique music panel, music sync; 2.LED Button Control: 19 lighting colors for LED button on the I/O panel; 3.Motherboard Control: Only when the 5V3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized. (Note: 12V 4PIN motherboard is not suitable for motherboard control, Button control is recommended.)

Product 1: Mesh Front Panel with Built in Blue LED Strip

Product 1: Compact Micro ATX Form Factor Design with Full Length PSU Cover

Product 1: Ideal for AIO Solutions up to 240/280 millimeter

PRECISION CUT CRAFTSMANSHIP: Comprised of 14 aluminum panels, ensure perfection in every curve and edge

UNRIVALED PERFORMANCE AND BEAUTY: 4 mm tempered glass panels on both sides, show off your gear

EXTENSIVE LIQUID COOLING SUPPORT: Enables 360mm installation with ease in the front and the top

POWERFULLY SMALL: The compact vertical design provides a small footprint while maintaining support for most full-sized GPU’s on the market.

A SIMPLE BUILD: The toolless SSD tray and riser card are incredibly simple to install. In addition to pre-routed cables, the motherboard I/O faces down, routing all cables through the bottom of the case.

INTEGRATED COMPONENTS: Integrated power supply and AIO liquid cooler provide a better build experience, along with pre-routed cables. An integrated PCIe Riser card is also included for vertical GPU mounting.

Pre-installed 6x 120mm Fans: Pre-installed 3x 120mm ARGB fans in the front and 3x 120mm regular fans in the rear and bottom provides the better airflow for the case and components.

Support Top 360mm Radiator: With support for up to a 360mm liquid cooling radiator in top, the case is easy to build with and easy to cool your CPU better.

Three Airflow Channel: Pre-installed fans and two fan locations next to the motherboard can provide the great airflow for the CPU, GPU and case in the same time.

[9 Pre-Installed 120mm ARGB Fans]-- Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans. Only when the 5V-3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized.

[2 Tempered glass]-- C590 gaming case is equipped 2 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere.

[I/O Panel]-- 2 x USB3.0 Port, 1 x Type C, 1 x HD Audio, Reset Button, Power Button.

--[UL-TESTED AND PLENTY OF POWER]: It's easy to be confused by so many different battery capacities in so many different products. Don't worry, and rest assured that all you need to know is that Alpatronix’s UL-tested battery case can provide you a reliable charge all day long. *NOTICE*: ONLY compatible with 5.5-inch model. Also compatible with Apple Pay & CarPlay.

--[MFi CERTIFICATION]: Means 100% compatibility with your iPhone 6S or iPhone 6. Install your phone in the case to have it protected, then charge when you need. iPhone and case can also be recharged together using the included cable and any USB charger outlet. Sync your phone with your computer while installed in the case. Works with the current iOS software and all future updates, Apple Pay, etc.

--[360-DEGREE PROTECTION]: Features 360° protection and compact design with minimum bulk and weight. Included screen protector offers full screen protection. Raised front bezels on bumper stand higher than your iPhone screen to avoid screen surface contact with other surfaces. This case has the highest industry regulatory certificates for United States and European Union: UL, CE, RoHS, and FCC.

【FULL PROTECTION】The shell of this SD card holder is made of high-quality aluminum alloy. An aluminum alloy spacer with a buckle is added in the middle of the double-layer box. The card slot is made of elastic EVA material. Whether it is a High-quality hard shell or a card slot made of advanced materials, it fully guards your memory card and makes you impeccable.

【LARGE CAPACITY】On the basis of the design aesthetic, the greatest degree of increase in the number of cards this SD card case. Each SD card slot is embedded with two TF card slots, with a total capacity of 6SD+12TF, allowing you to store as many memory cards as possible in a limited space.

【PORTABLE】This micro sd card holder weighs about 30g, plus 0.4 inches of thickness and smooth surface material, allowing you to easily put it in your pants pocket or backpack.

☆ 5 year worry-free: life-time friendly customer service to make our customer 100% satisfied

☆ Slim and Soft: flexible material keeps your Watch lightweight, thin minimal design is perfect compatible with iWatch 40mm/44mm Series 4 / Series 5 / Series 6/ Series SE

☆ Perfect Design: precise cutouts does not interfere with any of the buttons or knob, you can charge your watch directly without take off this bumper case

Stylish contemporary mid-tower computer gaming case with 1x tempered glass window (left), stylish RGB front panel with cooling slots, & 4x RGB fans preinstalled (outer ring glows)

Supports standard ATX, Micro-ATX, and Mini-ITX motherboards, USB3.0/USB2.0/HD Audio ports, and improved cable management

Supports video cards up to 350mm in length & CPU coolers up to 160mm in height

NEW DESIGN: No volume bar that breaks and LEXAN resin is now mixed with plastic for a stronger lasting case. We appreciate all of you for your feedback!

MORE GRIP: A non-slip matte coating is applied to every case to make it softer and have more grip!

STYLISH PROTECTION: Every minimalists dream - the Slim Fit 2 case - offers the maximum protection that a low-profile case has to offer. This ultra slim case offers scratch and corner protection. Slight lips around the case lifts up your iPhone and allows it to be placed screen-side down on flat surfaces and offers some screen protection when drops occur.

0.5mm Thickness Micro ATX Chassis Structure

Left Tempered Glass Side Panel.

Left Tempered Glass Side Panel.

Front-mounted Power Supply: Mounting the power supply at the front of the case frees up space at the bottom and expands the possible configurations for your build, while also improving internal heat dissipation.

Support for 360mm Radiators: With support for up to a 360mm radiator on the top of the case, you can optimize your cooling setup for maximum performance and longevity.

Type-C & USB 3.0 Ports: The I/O panel includes convenient Type-C and two USB 3.0 ports, ensuring fast transfer speeds now and in the future.

PATENTED TECHNOLOGY: EyeCarry has developed a unique patented Open Face Glasses Case for Easy One-Handed Access. We have created a luxury case made for everyone to enjoy a new way of storing eyeglasses.

STURDY AND LIGHTWEIGHT: The soft leather on the EyeCarry Glasses Case is made to not only carry your eyewear, but to protect it from scrapes on the lenses and damages to the frame. The durable case has comfortable Soft Premium Vegan Leather on the interior and exterior. The interior was designed to prevent your glasses from being scratched and dirtied. The case is substantial and protective, lightweight enough to carry with ease.

KEEP YOUR GLASSES CLEAN : The EyeCarry case is designed for protecting your lenses from dirt and residue, thus keeping them clean.

【Micro ATX Compatible】S001-V2 PC cases specifically designed to accommodate Micro ATX motherboards, ensuring compatibility with a wide range of computer components.

【Unique Wood Design】Our wood PC case feature a one-of-a-kind design that sets them apart from traditional metal cases, giving your computer a rustic and natural look.

【Cyberwood Technology】Our PC cases are constructed using our proprietary Cyberwood technology, which combines the natural beauty of wood with the durability and reliability of modern materials.

Small but powerful: The compact vertical design provides a small spatial footprint while maintaining support for most full-sized GPU’s on the market so you can maintain your desk real estate without sacrificing graphics power

A simple build: The toolless SSD tray, pre-installed PCIe riser card, and pre-routed power cables make installation incredibly simple

Unique design: The motherboard I/O faces down, routing all cables through the bottom of the case for a clean, simplified appearance

APPLICABLE MODEL - Designed for Microsoft Surface Laptop Go 2 12.4 inch 2022 Release model 2013 & compatible with Microsoft Surface Laptop Go 12.4 inch 2020 release model 1943.. Please kindly check the model number at the bottom of your laptop before purchase.

【NOT COMPATIBLE MODEL】- Case not fit for 13.5 inch microsoft Surface Laptop 5/4/3 and other Microsoft Surface Laptop model.

Easy Installation and Fit - A two-piece wnap on design for easy installation and removal.Allows your laptop to open more than 90 degrees and precise cutouts allow full access to all functions, fontrols, and Buttons. Plug your charger, cable, or headset without removing the case.

[2 Tempered glass]-- C770 gaming case is equipped 2 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere.

[I/O Panel]-- 2 x USB2.0 Port, 1 x USB3.0 Port, 1 x HD Audio, Reset Button, Power Button.

Cable Management]-- Back Bays: 1x 3.5'' HDD's and 1 x 2.5'' SSD's. Removable storage cable box;Designed reasonable back routing hole.

*NEW* The perforated mesh panel increases airflow and optimizes thermal efficiency.

The depth of the chassis allows approximately 60mm for heatsink-clearance. Granting enough room for most AMD and Intel coolers.

Use the B1 Mesh to match your lifestyle! Setup Your PC vertically or horizontally! Stand it up and use it as a headphone stand!

MORE THAN JUST A PC CASE: The REGIS is a luxury ATX cube enclosure that elevates chassis aesthetics to sculptural levels with its pure form & illusory infinity mirror lighting; includes 17 ARGB controller effects & 3-pin motherboard synchronization

SUPERB CRAFTSMANSHIP: Tempered-glass & brushed-aluminum panels are tool-free detachable, while the flawless smoke-grey surfaces are framed with gold-trim edges; a premium aluminum stand bolts the cube in place at an optimal viewing angle

VOLUMINOUS INTERIOR: The easy-to-access interior supports ATX, micro-ATX, and mini-ITX motherboards; GPU cards can be mounted vertically (3 slots, max. 320mm) or horizontally (7 slots, max. 336mm); comes with interchangeable 2.5" & 3.5" drive bays

Temperature Display: Glance at your system status.

Antec iUnity: Provides instant data on PC specs.

2 Cable Covers Included for Optimizing the Cable Routing.

Dual chambers for dual water-cooling systems Supports dual 360mm radiator

Custom center compartment for better cable management

Supports USB Type-C connectors

【Product Specifications】17.1" x 7.9" x 17.8", bodyweight: 15.8 lb. Plenty of space for components, durable and suitable for gaming PC, clean and attractive.

【Tempered Glass Panel】The panel consists of tempered glass and five-gold steel, making the RGB components visible at a glance. The motherboard is compatible with EATX, ATX, Micro-ATX, and Mini-ITX.

【Hardware and Interface】 CPU cooler height up to 160mm, graphics cards support up to 380mm. 2.5" SSD*3, 3.5" HDD*3 . Panel Interface: I/O board connector, HD audio, 2 x USB 2.0, power button, USB 3.0 *1, RGB key, reset button.

[10 Pre-Installed 120mm ARGB Fans]-- Suitable for enhanced cooling. With the pre-installed ARGB controller you can sync it with the motherboard, each addressable ARGB fan offers 16.8 million colors for exceptional customizable lighting. You don't need to pay extra for fans. Only when the 5V-3PIN cable on the control board is connected to the motherboard can the ARGB light synchronization be realized.

[3 Tempered glass]-- C700 gaming case is equipped 3 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere.

[I/O Panel]-- 2 x USB3.0 Port, 1 x Type C, 1 x HD Audio, Reset Button, Power Button.