Best Fsjee Connectors in 2026

These JST SM 2 Pin Connector can be widely used on most mini RC helicopter,indoor 3D plane,LED Light Strip,good for connecting motor, battery & ESC.

Widely use for LED strips, LED wall-washers, LED underground light, LED belt light, curtain light, twinkle light and so on.

These 2 pin jst connectors are matched, connect reliable,easy and convenient to install.

20 pcs Male 4 Pin JST SM Connector Wire + 20 pcs Female 4 Pin JST SM Connector Wire

Length: Male about 15.5cm; Female about 14.5cm; Wire gauge: 22AWG

Material: PVC plastic&metal; Color: Blue Red Green Black

Package content ： 14X Transparent Connectors, 5X 15cm Long 20AWG Extension Wires . LED strip to LED strip , LED strip to 2 pin wires , 2 pin wires to 2 pin wires Various functions can be switched and used at will.The clips metal tabs no need to contact FCOB LED strip copper pads directly.

Multiple Uses: Extend your 8mm width FCOB strip light, FCOB LED strip Splicing ,corner connection ,connect the power supply directly.The clips metal tabs no need to contact FCOB LED strip copper pads directly.

Characteristic: Large quantity 14pcs connectors .Transparent,it won't block out LED strip light,seamless connection .Firm fixing.Simple operation.No tin required.Tinny and low profile design.High Quality. High cost performance

Package content ： 14X Transparent Connectors, 5X 15cm Long 20AWG Extension Wires .LED strip to LED strip , LED strip to 2 pin wires , 2 pin wires to 2 pin wires Various functions can be switched and used at will.The clips metal tabs no need to contact FCOB LED strip copper pads directly.

Multiple Uses: Extend your 10mm width FCOB strip light, FCOB LED strip Splicing ,corner connection ,connect the power supply directly.The clips metal tabs no need to contact FCOB LED strip copper pads directly.

Characteristic: Large quantity 14pcs connectors .Transparent,it won't block out LED strip light,seamless connection .Firm fixing.Simple operation.No tin required.Tinny and low profile design.High Quality. High cost performance

Tight and stable connection：The metal pins of the LED strip connector pierce the front side of the strip, ensuring a 100% complete and stable connection; the transparent cover makes the connection part more visible.

Application:These LED strip connectors are suitable for non-waterproof and waterproof 4-pin 10 mm wide SMD 3528 5050 RGB LED flexible strips (not compatible with 4-pin RGBIC LED strips and 8 mm wide 4-pin LED strips).

Multi-USE: L-shaped LED corner connector with 90 degree angle and straight connector , perfect for various interior/interior use, including 4-pin RGB color changing LED lights for home, kitchen, bedroom, dormitory, engraving room, TV backlight, party decoration.

Main Function: this 2 pin connector can be applied for 8 mm/ 0.31 inches RGB LED strips and 22 AWG 2 pin wires, solid wires and multi core wires; Tip: not applicable to 10 mm/ 0.4 inch LED strips; Please use a standard 22 AWG wire for connection; There are some unqualified wires on the market that may result in unsuccessful connection; When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire

Simple Operation: insert the LED light bar light wire into the guide slot, check whether the positive and negative poles are correct, then press the cover down, and align the surface pad of the light bar with the pin on the track lighting connector

Operating Principle: the metal pin on the solderless gapless LED adapter connectors pierces the copper contact on the light strip, even slight swings and pulls can ensure a firm connection; Unqualified wires may include: there are too few copper cores to connect accurately; The copper core is off center and cannot conduct current; If the wire is qualified but the connection is still unsuccessful, you can re cut a piece of wire and try to connect

Main Function: this 4 pin connector can be applied for 10 mm/ 0.4 inches RGB LED strips and 22 AWG 4 pin wires, solid wires and multi core wires; Tip: not applicable to 8 mm/ 0.31 inch or 12 mm/ 0.47 inches LED strips; Please use a standard 22 AWG wire for connection; There are some unqualified wires on the market that may result in unsuccessful connection; When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire

Simple Operation: insert the LED light bar light wire into the guide slot, check whether the positive and negative poles are correct, then press the cover down, and align the surface pad of the light bar with the pin on the track lighting connector

Operating Principle: the metal pin on the solderless gapless LED adapter connectors pierces the copper contact on the light strip, even slight swings and pulls can ensure a firm connection; Unqualified wires may include: there are too few copper cores to connect accurately; The copper core is off center and cannot conduct current; If the wire is qualified but the connection is still unsuccessful, you can re cut a piece of wire and try to connect

Main Function: this 2 pin connector can be applied for 10 mm/ 0.4 inches RGB LED strips and 22 AWG 2 pin wires, solid wires and multi core wires; Tip: not applicable to 8 mm/ 0.31 inches LED strips; Please use a standard 22 AWG wire for connection; There are some unqualified wires on the market that may result in unsuccessful connection; When the connection is unsuccessful, please observe whether the clip connection contacts are in contact with the copper core of the wire

Simple Operation: insert the LED light bar light wire into the guide slot, check whether the positive and negative poles are correct, then press the cover down, and align the surface pad of the light bar with the pin on the track lighting connector

Operating Principle: the metal pin on the solderless gapless LED adapter connectors pierces the copper contact on the light strip, even slight swings and pulls can ensure a firm connection

▶APPLICATION: Fit to connecting or extending 4 pins 5050 3528 10mm wide rgb led strip lights.

▶PACKAGE INCLUDED:1*26ft rgb extension wire 4 Pins ,10* waterproof strip to wire connectors 10mm,10*solderless strip to strip connectors 10mm,20*strip lights holders.

▶SOLDERLESS & EASY TO USE:All these rgb connectors are solerless type, everyone can use it, no specific tools or experience required.

Working condition: our LED light strip connectors are able to stand up to 4 ampere current and 0 - 24V (5V, 12V, 24V) voltage, the heat resistance level is -20℃ - 100℃, so they are suitable for most non-waterproof 4 pin SMD 5050 RGB lights in 0.39 inch/ 10 mm width, and you should pay attention to use them correctly for ensuring safety and extending service life

Cuttable PCB board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips, just use your imagination to DIY a special light strip; Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board

Easy to install: LED strip connector clip can be easily opened and closed, you can quickly slide RGB strip into the connector clip without any tool, please make sure connector “+ -” polarity in line with “+ “ of strip before you connect it (Note: Do not pry up the metal pins of the connector, otherwise it may cause poor contact)

Tight and Stable Connection: Our LED light connectors feature metal pins that pierce through the front side of the light strip instead of clamping, ensuring a 100% full and stable connection. The transparent cover design reduces dark areas and makes the connection process visible

Easy to Use: These LED strip connectors are easy to use. Just open the cover with the supplied opener, place the front side of the light strip on the pointed pins while keeping the + aligned, and snap shut. They can go both left and right corner connection as long as the + of the light strips on both sides are aligned

Firm and Durable: These 4 pin led connectors are made with high-quality fireproof material, transparent, tough, and durable; The four prongs are made of quality tin-plated copper material, which is sturdy and safe, ensuring long-term use

What you get: 10pcs of 10mm 2-pin LED connectors to quickly connect your LED strips to extension cables. The included screwdriver is used to open the connector and use it again.

Application: These 2 pin connectors are suitable for connecting 10mm wide waterproof and non-waterproof 3528/2835 single color LED strips. Rated voltage: 0-36V; Rated current: 5A. The connector is suitable for 2 wires of 22 awg.

Features: It's convenient and easy to use, no need to solder, and the sharp copper thorn design can pierce the PVC protective layer of your extension cord to reach the copper wire inside.

Specification:2 pairs 2 pin male + female IP67 metal nut connectors with 18AWG wire Big size Length: Male extension cable 7.87in/20cm, Female extension cable 7.87in/20cm Total 15.7in/40cm/pair Male and Female Ends Push In 22mm nut.Please note : make sure that the connector can fit your original connector. Connectors from different manufacturers cannot be used together.Please use BTF-LIGHTING connectors, extension cords, tee connectors, and splitters connector.

High quality material: The pigtails are pre-tinned ,making soldering easy.No loose, reliable and lightweight. Material: Metal nut+Copper wire,eliable , no loose, lightweight and beautiful appearance, Easy disassembly, inspection and operation .Good sealing.

Wide range of uses:Motorcycles,Car,Truck,Boat,Indoor Outdoor Single Color LED Strip Lights LED String 5630 5730 3014 FCOB COB FOB 5050 3580 etc 2 pin LED strip or used for connecting the power supply Useful:This male/female connector is a very useful accessory when installing LED lights.

Specification:2 pairs 4 pin male + female IP68 metal nut connectors with 22AWG wire Small size Length: Male extension cable 7.87in/20cm, Female extension cable 7.87in/20cm Total 15.7in/40cm/pair Male and Female Ends Push In 15mm nut .Please note : make sure that the connector can fit your original connector. Connectors from different manufacturers cannot be used together.Please use BTF-LIGHTING connectors, extension cords, tee connectors, and splitters connector.

High quality material: The pigtails are pre-tinned ,making soldering easy.No loose, reliable and lightweight. Material: Metal nut+Copper wire,eliable , no loose, lightweight and beautiful appearance, Easy disassembly, inspection and operation .Good sealing.

Wide range of uses:Motorcycles,Car,Truck,Boat,Indoor Outdoor Single Color LED Strip Lights LED String RGB 5050 WS2813 WS2815 APA102C SK9822 WS2818 4 pin LED addressable strip Useful:This male/female connector is a very useful accessory when installing LED lights.

LP-16-C09PE-01-001 + LP-16-J09SX-03-401 ; Male Plug + Female Socket ; Connecting Mode: Plug/Unplug ; Protection Level: IP67(Mated) ;

【Standard】 Cable Specification: 0.34-0.75mm²/22-20AWG ; Cable Diameter Range: Ф3.0~Ф6.0mm ; Contact Diameter × Number: Φ1.0x9 ; Durability: ≥500 Mating/Unmating Cycle ; Temperature Rating: -40°C ~ 80°C ; Assembly Style:Solder ;

【Specifications】 Rated Current: 5A ; Operating Voltage (AC.V.rms): 250V ; Withstanding Voltage (AC.V),1 Minute: 1000V ; Contact Resistance: <5.0mΩ ; Insulation Resistance: ＞500MΩ ; Prohibited To Charged Inserted ;

Suitable for: these 4 pin LED connectors are designed for 10 mm/ 0.4 inches RGB LED strips and 22 AWG 4 pin wires, solid wires and multi core wires; Note: they are not applicable to 8 mm/ 0.31 inches LED strips, the product is suitable for standard 22 AWG wire; If it is not a standard 22 AWG wire, it may cause the card pin to be unable to align with the metal cell, thus resulting in unstable connection; Please carefully check the specification before purchasing

Easy Operation: you can simply insert the LED light bar light wire into the guide slot, and check whether the positive and negative poles are correct, then press the cover down, and align the surface pad of the light bar with the pins on the LED adapter connector

How It Works: the metal pins on the solderless LED light connectors pierce the copper contacts on the light strip, ensuring a firm connection even with a slight swing and pull

Specification: Y shape 2 pin LED connectors,male & female IP68 waterproof connectors with 16AWG.

High quality material: The pigtails are pure copper ,metal nut，making soldering easy.No loose, and reliable .

Length: Y led Extension cord connectors.13.5cm/branch, 27cm/full length.

[Package Contents] Including 12pcs 4pin 10mm transparent unwired strip to wire connectors. Compatible with 10 mm wide 3pin/4pin COB LED strips only, not for 8 mm LED strips; If the connection is not successful, then you can cut a new section of wire and try to connect.

[Transparent Connector] The COB LED strip connector is transparent, the transparent connector in the middle will not block the light, making the strip more continuous light, giving you a better lighting enjoyment experience.

[Simple Operation] No welding and other processes, this COB LED light connector is easy to use, just distinguish the “+” and “-” terminals of the connector, insert the strip into the connector, use pliers to hold the metal connector and make the strip conductive.

Sufficient Quantity: you will get 40 pieces of LED light strip connectors, offering large amounts to meet the connection requirements in daily life, bringing you a lot of convenience

Easy to Use: you can insert the LED strip light wire into the guide groove, check whether the positive and negative poles are correct, then press the cover plate down, and line with the surface pad of the light strip with the pins on the LED light extender

Main Function: this 2 pin LED lights adapter can be applied for 8 mm/ 0.3 inches RGB LED strips and 22 AWG 2 pin wires( 0.06 inch/ 1.6 mm in diameter), solid wires and multicore wires

One pack big size IP67 4 PIN Y metel nut connector .1 Male connector 2 female connectors .Support small size 4 pin metal nut connector IP67. Please note : make sure that the connector can fit your original connector. Connectors from different manufacturers cannot be used together.Please use BTF-LIGHTING connectors, extension cords, tee connectors, and splitters connector.

4 Pin big size IP67 Design Wire Cable 0.5mm²/20AWG.Mating Extension cord connectors: there are 3.2ft 6.4ft 9.6ft 4 Pin big small size extension cable metal nut connectors. The length of the wire can be increased, thus making it more versatile.

High quality material: making soldering easy. No loose, reliable and lightweight. Material: metal nut + Copper wire , eliable , no loose, lightweight and beautiful appearance.Easy disassembly, inspection and operation , Combination diversity.

Tight and Stable Connection: The led strip light connector’s metal pins pierce through the front side of the light strip instead of clamping ensuring a 100% full and stable connection;The transparent cover design reduces dark area and makes the connection process visible.

Cuttable PCB Board: the PCB board is cuttable, so you can use a cutting tool to cut T-shaped, L-shaped and X-shaped PCB board into any shape you want to facilitate the connection of various forms of light strips, just use your imagination to DIY a special light strip; Please cut the LED strip according to the cuttable mark when you want to change the shape of PCB board.

Easy to Install: Just open the cover with the supplied opener, Place the front side of the light strip on the pointed pins while keeping the + aligned, metal pins in the connector puncture the light strip on the copper contact points,snap shut and done;it can go both left and right corner connection as long as the + of the light strips on both sides are aligned

【Compatible Lights】The L-shaped connectors .Compatible with FCOB PWM CCT strips with 10mm width (not applicable to 8 or 12 mm PCB board width FCOB LED Strip Lights)

【Gapless and Stable Connection】The connector is seamlessly connected to the light strip without poor contact or disconnection. Press-fit mounting strips provide a more stable connection for daily use, making it easier than ever to enjoy diverse lighting effects.

【Features】Suitable for L-shaped corners.Splicing the light strips.No light blocking!Firm fixing.Simple operation.Tinny and Simple design.High Quality.High cost performance

【Compatible Lights】The L-shaped connectors Only compatible with PWM FCOB RGB strips with 10mm width (not applicable to 8 or 12 mm PCB board width COB LED Strip Lights)

【Gapless and Stable Connection】The connector is seamlessly connected to the light strip without poor contact or disconnection. Press-fit mounting strips provide a more stable connection for daily use, making it easier than ever to enjoy diverse lighting effects.

【Features】Suitable for L-shaped corners.Splicing the light strips.No light blocking!Firm fixing.Simple operation.Tinny and Simple design.High Quality.High cost performance

IP20 & IP65: These led light strip connectors fit for both non-waterproof and waterproof 6-pin 12mm wide SMD 5050 multicolor LED flexible strip lights.For waterproof led strip light, no need to peel off the silicone on the surface of led strip light

Made of PBT Fireproof Material: the transparent cover design reduces dark areas; The pure copper wires inside and connector contacts are tin-plated, ensuring perfect electric conductivity and longer lifespan

You can assemble the wire according to your needs, and our LED light strip connectors can flexibly adapt to different projects. No soldering required. Just snap the prepared LED strip section into the connector to connect.