Best Cushion Grip Cutters in 2025

Flush-cut micro soft-wire cutter has 8mm long jaw with angled head for flush-cutting applications on up to 16 gauge (1.3mm) copper and soft wire

21-degree

2.5mm heat-treated carbon steel construction provides durability and long life

DURABLE ratcheting cable cutters perfect for cutting up to 600 kcmil copper and 600 kcmil aluminum cables

MINIMAL CABLE DISTORTION: Hardened steel blades ensure consistent cuts and long-term durability

REPLACEABLE BLADES provide long lasting cutting of copper and aluminum wire

Ideal for brownies biscuits sandwiches sheet cakes cheese crispy treats fudge and much more

The cushioned grip gives you comfortable control even when cutting into thick desserts

Made in China

Precision Flush Cutter: Long-cutting jaws make more flush cuts and reach tighter places. Excellent for zip ties, beading wire, trimming circuit boards, jewelry making, model kit, Ethernet cable preparation, electronics work, and any that requires a flush cut

Sharp and Strong: Flush Cutter with improved blades design snips wire up to 16 AWG. 5mm thick heat-treated carbon steel blades for durability and strength

Non-slip Hand Grips: Flush cutter with non-slip hand grips with curved fore-edge provide comfort and control

PRO GRADE - Paladin Tools designs high quality hand tools for cable and wiring professionals. Safe, durable, and easy to use, Paladin Tools wire strippers ensure you get the job done right.

PRECISE - Confidently cut and strip 20-30 AWG solid and stranded wires. Applications include electrical, speaker, doorbell, intercom, and similar wire types.

ERGONOMIC - Featuring a built-in safety lock, cushion grip handles, and an optimum 22 degree angle to prevent awkward wrist bends and fatigue.

FLUSH-CUT MICRO CUTTER: KATA precision wire cutter pliers has 10mm long jaw with angled head design for flush-cutting applications.Flush cut well.

WELL MADE QUALITY: 2.5mm Heat-treated 65# Manganese Steel (65# Mn) construction provides Durability and Long Life.Small but Sharp Flush Cutters.

EASY TO OPERATE: Angled head flush cutting snip will not block your sight during work and the spring mechanism is smooth and reduce operator fatigue.

✅【Important Note:】This cable cutter is not suitable for cutting steel or steel wire, and should not be used to cut live wires. The quick-release lever allows the blade to be opened at any time during operation for added safety.

✅【Maximum Cutting Capacity:】Designed in Germany, this ratcheting cable cutter can cut copper and aluminum single conductors as well as multiple stranded cables with a maximum capacity of 240mm². It provides a clean and smooth cut without crushing or deforming the cable, making it the perfect tool for cutting large wires effortlessly.

✅【Durable Quality:】Featuring a unique ratchet driving unit, this cable cutter holds the cable tight and allows for rapid, straight cuts with minimal effort. The durable construction ensures it can withstand regular use and maintain its performance over time.

HIGH QUALITY: professional 10-inch wire cutter, each pair of pliers is forged with chrome vanadium steel, with high hardness, good toughness, sharp cutting, strong and durable. High-leverage design, with excellent cutting ability.

WIDELY USED: The cable cutter cuts 4/0 aluminum, 2/0 soft copper, 100 pairs of 24 AWG communication cables, precise, one-handed cutting action is as easy as cutting butter with a hot knife. Making your work easier and prevent hand and wrist fatigue.

PVC NON-SLIP HANDLE: The cable cutters heavy duty ensure a better and more stable grip. The handle of this high-leverage cord cutter is covered with a flexible and non-slip PVC material to increase friction and provide a more comfortable grip.

Plastic blade cuts precise, clean shapes

Comfort grip is cushion for easy, comfortable cutting

Set includes: circle, star, butterfly and flower

Like a Hot Knife Through Butter: The electrical cable cutters heavy duty compound leverage design helps you effortlessly cut 4/0 aluminum, 2/0 soft copper, 7/8” coaxial cable and 100-pair 24 AWG communications cable. This cable cutter is not for steel.

Ergonomic: Give your hands the break they deserve. Our cable wire cutters ergonomic handle design helps eliminate fatigue from extended use. The cable cutter pliers also easily fit into most tool pouches.

Built To Last: The 10 inch wire cutters heavy duty cutting heads undergo a specialty heat treatment process which allows these heavy gauge wire cutters to cut just as cleanly the 100th time as they did the 1st time.

HIGH-QUALITY STEEL: Professional cutting tools for precision electronics maintenance and other industries, can cut 0.8mm/0.03inch soft iron wire and 1.6mm/0.06inch soft copper wire. It is made of special SK5 steel material, and the hardness of the blade is up to HRC50 ± 3 deep quenched, so it is easy to cut.

GOOD SAFETY: The thickness of the head is up to 2mm/0.07inch, and the design of the double-low-edge beveled edge can effectively prevent the wire from splashing during shearing. To ensure the durability of the cutter, do not use it to cut hard or large-sized wires.

WIDE APPLICATION RANGE: High hardness and thin cutting edge make WF-168 pliers suitable for a variety of operations, electronic components, soft iron wire, model making, plastic burrs, etc. Ideal for students, beadwork, jewelers, electricians and craftsmen.

Drop Forged Hardened Alloy Steel Jaws for Cutting Power

Adjustable and Replaceable Jaws

Cushioned Rubber Grips for Non-Slip Hold

Hardened steel construction

Strips solid and stranded wire sizes 10-20 AWG

Serrated pliers jaw grips, pulls, and twists

Wire Cutters Material: 6 inch Wire cutter is forged by High-Carbon Steel, solid and durable. And snips cutters with plastic coated handle for comfortable and girp in daily use time.

Side Cutters Spring Loaded Design:The Spring-loaded side cutting diagonal pliers reduces muscle fatigue for easy one-handed operation.

Flush Cutter Size:6 inch cutting pliers are good size to fit in the hand of an average adult and not so heavy as to be a struggle to hold.

Made of heavy duty 65# manganese steel

Weight: about 200g

Size：8" , Overall length ：180mm, Handle-bar Length: 108mm

CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters; Keep well oiled, not for use on stainless steel

EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm); Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item

EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps; Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut

Mpn: 727M

Country of manufacture: Japan

Manufacturer: Greenlee

TOUGH AND RELIABLE: The Durable Alloy Steel Jaw with Wire Cutter is built to last and designed to withstand even the toughest tasks, making it the perfect addition to your tool kit.

WIRE CUTTER INCLUDED: With a built-in wire cutter, this jaw is perfect for cutting through wire, cable, and other materials, making it a versatile tool for a variety of tasks.

COMFORTABLE TO USE: The Cushion Grip Handle provides a comfortable and secure grip, reducing hand fatigue and allowing you to work for longer periods of time without discomfort.

The Package Length of the Product is 11.43 centimeters

The Package Width of the Product is 5.842 centimeters

The Package Height of the Product is 1.524 centimeters

3 Pack 5" wire stripper and cutter

Self-opening cushion grip handles

Cleanly and neatly strips and cuts both solid and stranded wire

Dimensions: Overall Length: 5.75-inch, Weight: 0.21 lbs

Clauss 5.75” wire cutter with micro sized jaw constructed from high quality carbon steel to elevate the performance of the cutter

This wire cutter has micro sized jaw and a puncture resistant tips to hold decent edge

"XCELITE" WIRE STRIPPER

Cuts and strips both solid and stranded wire cleanly, neatly

Adjustable screw stop for different wire sizes

Tapered head diagonal cutter

Used for cutting component leads

Ultra-Flush cutters for cutting beading wire and thread

Extra hard jaw for extended life; Ergonomic cushion grip handles

Made in Europe

Tapered Relieved Head Cutter: The five star Laser Line medium tapered/relieved maximum flush cutter has a cutting capacity of .005 inch - .040 inch soft wire.

Carbon Steel Cutter: It is made of carbon tool steel with induction hardened cutting blades to RHC 63-65.

Long Lasting Cutter: CNC machining of these Excelta cutters allows the joint surfaces to be perfectly flush to allow for long life. These tools include dual leaf springs for a very smooth action.

Transverse end cutter

Flush cutting edge

Vertical cutting in tight spaces

Flush cutting

General use

Features green cushion grips

Sturdy and Quality Material: the blade of the flush cutter is made of 65# high carbon steel, which is pointed and sturdy, not easy to rust or break, practical for cutting soft copper wires, but it does not use on hard steel wire

Comfortable and Stable Handle Design: the handle of the flush cutter for jewelry making is made of PVC material with some friction, which makes it stable for you to hold, not easy to slip out of your hands, and it is also soft and comfortable to grasp

Sufficient Wire Clippers: the package contains 12 pieces of blue flush cutter pliers, sufficient quantity to meet your daily needs and replacements, and you can also share with your families

Wiha patented DynamicJoint for 40% stronger grip and easier cuts

Induction-hardened cutting edges and jaws for superior sharpness and longevity

Ergonomic cushion grip handles for comfort and control

Oval head diagonal cutter with handle coil spring

Heavy-duty cutting