Best 2 Differential Amplifiers in 2026

The R2-300X4 full-range class-D 4-channel amplifier (1.9" x 6.8" x 10.1") is packed with features and performance to deliver power and bass on demand with 300 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 @ 4Ω OR 75 Watts x 4 @ 2Ω OR 150 Watts x 2 @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

The R2-750X5 full-range class-D 5-channel amplifier (1.9" x 6.8" x 11.2") is packed with features and performance to deliver power and bass on demand with 750 Watts of RMS power

Class D technology makes this amp extremely efficient by reducing demand on the vehicles electrical system (RMS Power: 50 Watts x 4 + 200 Watts x 1 @ 4Ω OR 100 Watts x 4 + 350 Watts x 1 @ 2Ω OR 200 Watts x 2 + N/A @ 4Ω Bridged/Mono)

Featuring C.L.E.A.N. circuitry to help you adjust your gain settings, a P.O.W.E.R. Supply that generates more power as voltage increases, and integrated Punch EQ that corrects for acoustic deficiencies while delivering up to 3X the bass

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.

📢 PEAK POWER: 1000 Watts

📢 RMS POWER: 【4 ohms: 180W x 1 chan.】【2 ohms: 320W x 1 chan.】【1 ohm: 500W x 1 chan.】

📢 COMPACT: Cutting edge Micro Class D technology allows amplifier to be extremely compact. Dimensions: 6.8"L x 3.3"W x 1.5"H

Package Includes: (1) RockvilIe RXD-T2 Micro Class D Car Amplifier 2400w 2 Channel 2x400W CEA Rated. (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wire Kit w/RCA's. RockvilIe RXD-T2 Micro Class D Car Amplifier 2400 Watt 2 Channel 2x400W CEA Rated. Full-Range Class D Amplifier Architecture. CEA Compliant Power Ratings: 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N

1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD. 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD. Peak Power Ratings: 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged. Fully marine grade amplifier. Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more. Double Sided Surface Mount (SMD) PCB Design. High-Speed MOSFET Power Supply

Studio-Grade Bipolar Output Stage Transistors. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. Status Mode LED Indicator. 8 Volt Preamp Circuitry. 4 Gauge Lucite Encapsulated Power/Ground Terminals. 12 Gauge Lucite Encapsulated Speaker Terminals. Fully Adjustable 12dB / Octave Crossover

Our compact (1.5" x 4.25" x 6.75") PBR400X4D is small enough to fit in just about any application but packs a Punch with 400 Watts RMS of power!

Versatile design can be used in either 2 or 4 channel configurations (RMS Power Output: 50 Watts x 4 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm or 200 Watts x 2 @ 4-Ohm Bridged)

Ultra efficient Class D full range design produces maximum power with minimal strain on the vehicle's electrical system. A great choice for both mobile installs as well as motorcycles and recreational vehicles

Ultra-compact, high density aluminum alloy chassis provides superior thermal stability | Four layer, glass epoxy circuit board for enhanced performance and reliability | Circuit board conformal coated (water resistant) for marine applications | Full Range Class D amplifier technology

Bridgeable for high power operation (CH1+CH2/CH3+CH4/CH5+CH6) | Balanced differential inputs for superior noise rejection | Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Selectable auto-turn-on modes: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC)

Fully variable, 12dB per octave, electronic crossover | Remote level control for Channels 5 and 6 included | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Top mounted controls for convenient adjustment | Integrated soft clip light for quick system set-up | Illuminated logo

Name: AD8130 Differential Amplifier Size: 43mm X 38mm Supply voltage range: ±5V~±12V

The differential-to-single-ended amplifier, which has a 270-MHz bandwidth and a very high common-mode rejection ratio (CMRR) at high frequencies, can also be effectively used as a high-speed instrumentation amplifier or to convert a differential signal to a single-ended signal.

Differential amplifiers can process single-ended inputs as interactive differential outputs or treat differential inputs as differential outputs. These amplifiers have two independent feedback loops that control the differential and common-film output voltages, respectively.

Usually the CTRL pin is connected to the MUTE pin of Bluetooth.

The amplifier board is in ACF-1 mode by default. When using the CTRL mode setting, solder R5 off.

The appearance and color of different batches , which does not affect the .

POWER ON: Atom series amps are built with sequenced delays to eliminate Residual power-up/power-down pops. Equipped with differential RCA inputs to isolate 12v audio to ground.

DESIGN: A Hybrid Aluminum Alloy Heatsink for optimum heat dissipation combined with an intricate MOSFET power supply full of Audiophile Grade IR Transistors. A Military Grade SMT PCB for Dynamic Performance finishes the stack.

SIGNAL: Volume low ESR Capacitance Banks compensate for power supply ripple. A set of individually regulated Preamp/Crossover components ensures signal purity.