Best Acurite Digital Thermometers in 2026

Better Accuracy: The Lasergrip’s 12:1 distance-to-spot ratio enables you to accurately measure targets from a comfortable distance. For best results, position the thermometer approximately 14.17 inches / 36 centimeters away from the target

Adjustable Emissivity: The upgraded Lasergrip lets you quickly change the emissivity from 0.1–1.0 by holding the Up and Down buttons. Whether you’re working on your car or testing the temperature of your grill, the Lasergrip can help you get the job done

Wide Range: Choose your preferred unit and measure temperatures anywhere within the upgraded range of -58°–842°F / -50°–450°C. Then watch as your result appears on the bright LCD display in less than half a second

NOTE: NOT for human. Helect infrared thermometer can be used both daily and industrial temperature measurement, such as cooking, refrigeration, steel, glass, plastics, food and so on

°C/°F switchable, automatic data hold, backlit LCD, low battery indicator, auto power off function. 9V Battery is included

Easily and quickly measure temperatures from a safe and hazard-free distance. NOTE: The diameter of the object under test must be bigger than the laser spot size

Infrared Thermometer has an optical resolution (distance-to-spot) of 10:1

Features include targeting laser; automatic hold; backlit display; low battery, auto power-off

Drop protection to 6.6-Foot (2 m)

【High Accuracy】Temperature range: -50 ~ 550℃ (-58~1022℉) / Accuracy: ±1.5% or ±1.5℃ / Emissivity: 0.1-1.0(Adjustable) / Response Time: <500ms/Distance Spot Ratio:12:1.

【High Temperature Spot Positioning】Locating a hot spot aim the thermometer outside the area of interest,then scan across with up and down motions until you locate the hot spot.(please turn on the laser to for accurate measuring)

【Versatile Design】Auto Power Shut Off in 7 seconds without any operation ; Low electricity .Optional Laser Target Pointer and Backlight ON/OFF, convenient to accurate targeting and operate in case of poor illumination; ℃/℉ button - switching the displayed temperature from Celsius degree to Fahrenheit degree as you need.

High Temp Thermometer - When you’re smelting or heating your kiln up to cone 10, you don’t want a temperature probe that fails. Our instant read digital thermometer is perfect for DIY or commercial uses alike.

Two ways to measure - Use the 20-inch metal probe to take a quick reading of just how hot your furnace is, or you can run the insulated thermocouple wire into your wood-fired oven or gas kiln to take a reading. Both use a standard K-Type flat male/female connection.

Pairs perfectly with our other products - Designed to read temps in our GG series of furnaces, our CMF line of tough forges, or our smokeless fire pits. Requires one 9V, not included.

High Temperature K-type Thermocouple Thermometer Set with Stainless Steel Probe

K-type thermocouple wire with Standard Accuracy: +/- 2.2 °C or +/- .75%

5 ft (155 cm) long thermocouple cable with braided stainless steel cover, mini thermocouple plug made from chromel / alumel

Temperature range: -50°C to 1300°C ( -58°F to 2372°F) and Overload display alert when input exceeds measurement range pyrometer

Designed for use with K-type thermocouples and Selection between Celsius and Fahrenheit.

Decimal or round number display selectable (decimal range is -58.0F to999.9F and round number range is -58F to 2372F)