Best Occupancy Sensor Dimmer Switches in 2026

Motion sensor switch automatically turns the lights on when you enter the room and off when you leave

Features XCT sensing technology which detects fine motion, such as typing at a desk or reading, ensuring lights do not turn off inadvertently

No neutral wire required

【Advanced Motion Detection】Completely hands-free and smart operation of your connected lights. You can set this switch to automatically turn on the light when motion is detected and turn off after a preset time. Ideal for areas such as bedrooms, hallways and restrooms where hands-free operation is ideal.

【Daylight Detection】Smart ambient light detection will sense daylight and prevent lights from turning on during the day.

【Dimming and Smart Mode】Set different light triggers and brightness levels based on your routine for effortless control. Adjust the brightness of your lights from 1% - 100%.

MOTION SENSOR GARAGE LIGHT Automatically detects motion from passive infrared sensors to turn lights on and off based on room occupancy and vacancy

PIR SENSOR SWITCH Passive Infrared Detection (PIR): Detects infrared to reduce false triggers from unwanted movements.

MOTION SENSOR WALL SWITCH Universal wiring design allows compatibility with any home. Easy install. Two Black Wires, any one connects with hot, and another with load

【PIR Motion Activated】The PIR motion sensor switch can detect human movement through infrared rays emitted by the human body to automatically control lights, etc.

【Easy to Operate and Use】The latest PIR motion sensor can precisely adjust the light intensity, delay time and light sensor with just push of a button.No more adjusting values with a screwdriver to save you the trouble.

【Quick&Accurate Dimmable and Delay Time】Dimmable default setting100%, Adjustable from 15%, 30%, 45%, 60%, 75%, 100% by long press; Delay time default setting 15s(15s,30s,60s,3mins,5mins, 15mins, 30mins adjustable).

✅【Easy to install】 No neutral wire required 【Grounding Wire is Required for Function】 - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.

✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.

✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.

Neutral Wire Required: This motion sensor requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Lights will flash if not correctly connected. Please review your wiring setup prior to purchase. We recommend consulting with a licensed electrician prior to purchase to ensure proper installation and compatibility.

Save On Electricity Bills: This dual purpose vacancy and occupancy wall switch sensor provides optimal management of lighting and a choice of either Manual-On (Vacancy Sensor) or Automatic-On (Occupancy Sensor) switching. These sensors are engineered to ensure that lights will turn ON manually or automatically and turn OFF automatically when motion is no longer detected within range. This saves energy, provides convenience and lowers electric bills.

Adjustable Sensitivity With Wide Field of View: The motion sensor covers 180°, so all motion is detected. There’s no need to wave your hands at the sensor. Sensitivity can be adjusted, so the lights won’t switch off at inconvenient times.

【Wi-Fi Motion Sensor Light Switch】Automatically turn on/off lights based on room PIR occupancy when detecting infrared motion(Note:The sensor keeps staying off if the environment is bright).The adjustable time delay from 15sec--60mins optional.Work with Tuya Smart & Smart Life APP. Manage your device with voice commands via Amazon Alexa or Google Assistant.

【Smart Wi-Fi Motion Detector】 It's also perfect for home security.When PIR detects humans in motion, your phone will receive an alarm signal,Home Security Alarm make House more safety.

【VERSATILE SETTINGS on App】The Light switch sensor features adjustable settings. Automatic ON/OFF and Manual ON/ OFF operation, Adjustable time delay from 2sec--60mins, Wi-Fi Indicator turn on/off.

✅NEUTRAL WIRE REQUIRED: The Pir sensor switch requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Please confirm you’re wiring setup before purchase. If you have any doubt, please consult with a licensed electrician.

✅VERSATILE SETTINGS: The motion detector light switch features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing.

✅OCC / VAC OPTION: The homekit light switch with Occupancy mode (Auto ON / OFF) and Vacancy mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs. Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights and fan accidentally left on all day.

SENSING AND CONTROL: Sensor that can automatically turn off any number of Caseta smart devices after you leave a room

ACTIVE HOURS FEATURE: Set sensor to trigger lights on/off based on time of day or sunrise/sunset; use the Lutron app to customize when sensors are active, which lights the sensor controls, and light levels (Caseta Smart Hub, L-BDG2-WH, required)

VERSATILE AND POWERFUL: one sensor can turn off any number of Caseta switches, dimmers, fan controls, and Serena smart shades within 60 ft.

✔NEUTRAL WIRE REQUIRED: This motion sensor switch need neutral wire. Please review your wiring setup prior to purchase.

✔NO REASON TO RETURN: Thanks choice ECOELER products. If you don't absolutely love our product, let us know and receive a full, no questions asked refund. During used, if our light is broken, please contact us, we will refund or pay a new one to you.

✔3-WAY SWITCH: This motion sensor occupancy switch is a 3-way switch allowing the lights to turn on from multiple switch locations in the room.

✅Super Ceiling Sensor: 360 degree PIR High Bay Occupancy Sensor utilize the industry’s leading Passive Infraed technology,It is ideal for high mounted areas such as warehouse, supermarket, manufacturing, and more.

✅Time Delay: Light Switch Motion Activated Adjustable time delay from 15 Sec to 30 mins, Adjustable sensitivity, Adjustable light level sensing, can customize your sensor to optimize energy savings and operation.

✅Energy Save: The sensor protects and extends lamp life while maximizing energy savings by turning the lights off when it detects no movements in a given duration of time.

VOICE CONTROL – ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). Works with the following Z-Wave certified hubs: SmartThings, Ring Alarm, Wink, ADT Pulse, ADT Command, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and more.

SELECTABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub.

3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device.

【PIR Motion Activated】The PIR motion sensor switch can detect human movement through infrared rays emitted by the human body to automatically control lights, etc.

【Easy to Operate and Use】The latest PIR motion sensor can precisely adjust the light intensity, delay time and light sensor with just push of a button.No more adjusting values with a screwdriver to save you the trouble.

【Quick&Accurate Dimmable and Delay Time】Dimmable default setting100%, Adjustable from 15%, 30%, 45%, 60%, 75%, 100% by long press; Delay time default setting 15s(15s,30s,60s,3mins,5mins, 15mins, 30mins adjustable).

Leviton 1-Pole Commercial Grade Occupancy Sensor Wall Switch, Passive Infrared, 120 / 277 Volts

Convenient push-button provides manual on/off light switching at any time

180-degree field of view provides approximately 2,100 square feet of coverage

Super Ceiling Sensor has 3 detectors for triple overlapping coverage to catch small movements.LED testing and operation Indicator.Integral 30 amp power pack simplifies wiring (installation required)

Maximum coverage - 360 deg or hallway models.Relay and sensor all in one unit reduces installation costs.

Can be wired in parallel.Compatible with dimmers and electronic ballasts.

✔Neutral Wire Required: Please review your wiring setup prior to purchase. The PIR infrared motion activated wall switch is need NEUTRAL WIRE (not suitable for 3way). If you have any installation issues, please consult an electrician or contact us through message, we will provide you technical guidance.

✔Easy Custom Modes: Sensor Light switch features adjustable settings. Adjustable time delay from 15sec-1min-5mins-15mins-30mins, adjustable sensitivity and adjustable light level sensing. You can set the switch according to your own needs.

✔Variety Modes Choice: The motion-activated switch has three modes, OCCUPANCY (OCC) Mode: auto on & off, VACANCY (VAC) Mode: manual on & auto off and OFF Mode: manual on &off. Make your home convenient with a single switch.

Dual technology motion light switch combines passive infrared (PIR) and ultrasonic sensors in one sensor switch for enhanced accuracy and to detect fine motion, such as typing, reading, etc

Combination of PIR and ultrasonic sensors eliminates false positives by preventing lights from shutting off when the room is still occupied

Ideal for private or executive offices, meeting rooms, restrooms, libraries, classrooms, and other spaces where limited movement is likely to occur to ensure the light does not shut off by itself

Automatic ON/Automatic OFF provides 180-Degree field of view and 900 square feet of coverage

600W Incandescent/Halogen, 150W LED/CFL loads. No Neutral or ground wires required for installation

Single Pole or 3-way when used with a 3-way switch

【Neutral Wire Required Installation】: Three wires (Black, Green and Red). Black wire goes to Hot; Green wire goes to Neutral; Red wire goes to the hot end of your light (the load). Then the other end of the light and the green wire of the switch go to the Neutral. Please also see pictures carefully before you install to avoid causing any false alarm.

【Motion Sensor & Light Sensor Switch】: Automatically turn on/off lights based on room occupancy when detect hear source and environment brightness. Detection motion speed is 0.6~1.5m/s.

【Time Delay】: Adjustable Time-Delay for customizing: Min: 10sec±3sec ; Max:7min±2min (The load will stay on for the time you set, then go out).

✅【Three Working Modes are Available】 The sensor switch has Occupancy sensor switch (Auto turn on/off), Vacancy sensor switch (Manual turn on, auto turn off) and ON/OFF switch (Manual turn on/off). You can set it what you need.

✅【Easy to Operate and Use】 The motion sensor switch is just by pressing button to adjust the value of Delay-time and Light Sensor, don’t need to open the cover and adjust the value with a screwdriver, this save you the hassle.

✅【Quick and Accurate Setting】 You can get the exact Lux value and time delay. Light sensor : Default 25Lux(±10Lux), 15Lux, 35Lux , OFF optional; Time-Delay: Default 1min(15secs, 1min, 3mins, 5mins, 15mins, 30mins adjustable)

✅OCCUPANCY LIGHT SWITCH: Passive Infrared (PIR) occupancy detection, uses infrared signals to detect moving objects, to automatically turn ON/OFF lights. PIR motion sensor a bright LED indicator when the activated motion.

✅VERSATILE SETTINGS: Light sensor switch features adjustable settings. Adjustable time delay from 15sec-30min, Adjustable sensitivity from 20-100%, Adjustable Light level sensing.

✅360° DETECTION RANGE: Installed at 10 ft (from 5-15 ft), sensor detector provides 360-degree detection with 20-ft detection range. Ideal for hallways, bathrooms, storage areas, closets, mud rooms, pantries and more.

CONVENIENT: automatically turns lights on/off based on motion. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – slim profile fits in most wallboxes. 600W LED/CFL 1800W Incandescent/Halogen 1200VA Magnetic Low Voltage/Electronic Low Voltage/Fluorescent, 1/2HP Fan, 15A Resistive

FLEXIBLE – single pole, 3-way when used with DD0SR switch companion or multi-sensor with two DOS15 sensors in application where two sensors are needed for the coverage area, such as a “L-shaped” room

The passive inferred (PIR) sensors detects movement up to 1,200 square feet with a 180° field-of-view to automatically turn on/off the lights on when you enter/leave the room

Light timing can be independently set in increments of 10, 20, or 30 minutes while a daylight sensor will not turn on lights if ambient light in room is sufficient; works with incandescent bulbs up to 500W and LED bulbs up to 150W

Push button provides manual ON/OFF light switching at any time between occupancy detection (lights ON/OFF are fully controlled) and vacancy detection (lights manual ON and auto-OFF)

Compatible with dimmable 0-10V LED and FLR ballasts

Provides 180 degree field of view and 1000 sq. Ft. Of major motion coverage

Selectable time delay of 15 seconds (test mode, changes to 2 minutes after 2 minutes of powering up), 5 minutes (factory default), 15 minutes and 20 minutes

【Smart Motion Sensor】 It can be used as single-pole or 2 location control.(NOT suitable for 3 way circuit). The switch automatically turns lights on when motion is detected and turns off after a preset time. The adjustable time delay from 15sec--60mins optional.

【Multiple Control】Enjoy Hands-free operation of your lights from anywhere. Manage your device with voice commands or Tuya Smart & Smart Life APP. It work with Amazon Alexa, Google Assistant. (Not support Apple Homekit)

【Widely Use】The PIR sensor detects motion with a 120° field of view and the detection distance is 23ft coverage, strong sensitivity. It's also perfect for home security. When PIR detects humans in motion, your phone will receive an alarm signal. It can install in laundry rooms, kitchens, entryways, mudrooms, hallways and more.

【SUPER OCCUPANCY SENSOR】 - 3 detectors for triple overlapping coverage to catch even small movements.

【LIGHT SENSOR ADJUSTABLE】 - 3LUX~2000LUX adjustable, the ceiling occupancy sensor can be adjusted to both work in day and night, or only work at night.

【TIME DELAY ADJUSTABLE】 - 10sec-7min adjustable, the delay time controls how long the light stays on once the ceiling motion sensor gets triggered, during the delay time if motion detected, the delay time will reset and start a new delay time.

【Built-in Motion Sensor】Automatically turn on/off lights based on room PIR occupancy when detecting infrared motion. The adjustable time delay from 15sec-1min-5mins-15mins-30mins optional, Detection motion speed is 0.6~1.5m/s.

【Scene Linkage for Home Automation】Create smart scenes with other Tuya smart home devices for whole house linkage, such as when the motion sensor detected the person is coming, the light is ON. At the same time, automatically turn on other smart devices, such as air condition, fan, curtain, etc.

【Energy-saving】Light stay off during the day. Functional sensing effect in the dark. Monitor your lights on the phone, don’t have to worry about checking if any lights are left on.

Single-Pole With Led Occupancy Sensor Dimmers

Occupancy Sensor Dimmers Provides A Selectable Ambient Light Override Preventing Lights From Switching On When There Is Acceptable Natural Light

It Work With Incandescent And Halogen, Magnetic Low-Voltage Only

Compatible with 0-10V dimming luminaries

100% passive detection

Small motion detection up to 20 ft

The product is good to use

The product is highly durable

Manufactured in China