Best Leviton Motion Activated Wall Switches in 2026

【Not Only A Light Switch】:SOZULAMP illuminated wall light switch is a standard single pole rocker light switches, just a screwdriver is enough to replace any standard switches with ease; Built-in hidden led nightlight protect kids from electrical shock; The hidden night light shines a pool of soft, glare-free lighting down the wall onto the floor that is just bright enough to light a pathway to where you are going in your home, prevent you from stubbing your toes or falls during midnight.

【Widely Applicable】:Just the right amount of light from a row of leds on the bottom edge of the light switch(not super bright like a night light), that doesn’t interfere with sleep; don't need to turn on the ceiling light and hurt eyes in the middle of the night; also helps locate the light switches at night; don’t have to fumble for the light switch; you can use the led night light wall switch for the outside lights and check the led at night to make sure you have turned the outside light off.

【Energy Efficient】:There is a small dot on the rocker switch itself behind which there is a dusk to dawn sensor, it means that the LED’s brightness varies with how bright the light in the room is. turns on as it gets dark and load is "OFF", turns off as brightens; The led night lights are super power-efficient, costs less than 10 cents to run annually, save money on your electricity bill. last about 25 times longer than incandescent.

✅【Easy to install】 No neutral wire required 【Grounding Wire is Required for Function】 - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.

✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.

✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.

2-pack motion sensor switch automatically turns on/off lights, fans, and motors based on the occupancy and vacancy detected in a room

AUTO mode works as an occupancy sensor (Auto ON, Auto OFF). ON and OFF modes allow you to override the sensor and use the sensor switch as a regular light switch

Max Sensor Coverage Area 980 sq ft, 180º Field of View. Adjustable range and sensitivity from 30% to 100%

HANDS-FREE LIGHTING CONTROL: Use built-in motion and ambient light detection to control lighting. Turn lights on when motion is detected and off when the room is unoccupied.

FEATURES: Motion Snooze; Night Settings allow a lower level at night or use a built-in Guide Light; Full Range-Dimming, Preset Light Levels, Fade Rates, and Bulb Types

ROOM OCCUPANCY RESPONSE: Use the My Leviton app to setup On/Off control of multiple Decora Smart Wi-Fi devices in a room based on Occupancy

CONVENIENT: automatically turns lights on/off based on motion. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – slim profile fits in most wallboxes. 150W LED/CFL, 250W Incandescent/Halogen, 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive

FLEXIBLE – for homes new or old, can be installed with or without a neutral wire. A ground wire is required for installation

✅【Easy to install】 No neutral wire required 【Grounding Wire is Required for Function】 - ideal for homes of all ages. Replace existing switch or sensor in as little as 15 minutes. Ultra slim profile, easily fits in electrical box and wall plate.

✅【Universal Compatibility】 Works with 300W LED, 300W CFL and 600W incandescent light bulbs on the market.

✅【Modern Design】 Exquisite matte finish and frameless design looks best with today’s decors. Tough thermoplastic housing shrugs off impacts and scratches. Rational design for comfortable and intuitive control.

✅NEUTRAL WIRE REQUIRED: The Pir sensor switch requires connecting all 4 wires (including the NEUTRAL wire) in order to function properly. Please confirm you’re wiring setup before purchase. If you have any doubt, please consult with a licensed electrician.

✅VERSATILE SETTINGS: The motion detector light switch features adjustable settings. Automatic ON /OFF and Manual ON/Automatic OFF operation, Adjustable time delay from 15sec-1min-5mins-15mins-30mins, Adjustable sensitivity, Adjustable Light level sensing.

✅OCC / VAC OPTION: The homekit light switch with Occupancy mode (Auto ON / OFF) and Vacancy mode (Manual ON, Auto OFF) allow you to customize the sensor according to your needs. Save money on your energy bill by making sure unused lights and fans are always turned off with a motion sensor switch. Vacancy mode’s manual-on feature saves further energy by ensuring lights and fans are turned on only when needed with a motion sensor switch. Avoid having lights and fan accidentally left on all day.

【High Quality】 Durable construction made of high-quality, impact resistant polycarbonate thermoplastic and solid steel for extended service life..UL listed.

【Self-Grounding】 A green grounding screw and self-grounding clip provide for automatic grounding in the junction box can protect electrical appliances and effectively avoid electrical damage from strong electric charges and also protect you from electrical shock.

【Easy Installation】 Designed for quick push-in wire and side wire. Break-off plaster ears for best flush alignment. Break-off tabs allow easy two-circuit conversion. Longest, broadest mounting strap for the best possible reach to wall or panel surface.

Leviton 1-Pole Commercial Grade Occupancy Sensor Wall Switch, Passive Infrared, 120 / 277 Volts

Convenient push-button provides manual on/off light switching at any time

180-degree field of view provides approximately 2,100 square feet of coverage

Sensor wall switch detects motion to automatically turn lights ON and OFF based on the occupancy or vacancy in a room

Passive Infrared (PIR) sensor detects motion with 180° field of view; advanced PIR reduces false triggers from unwanted movements

Motion sensor wall switch features a universal wiring design with interchangeable hot and load wires to make installation easier; no longer second guess which wire goes where

CONVENIENT - Detects motion and turns lights ON/OFF automatically

ENERGY SAVING – Helps prevent lights from being left on when room is vacant

ADVANCED – Prevents automatic ON when space has ample natural light

Manual ON/Automatic OFF, provides 180-Degree field of view and 900 square feet of coverage

600W Incandescent/Halogen, 150W LED/CFL, 600VA Fluorescent, 1/6HP Motor loads. No Neutral wire required for installation

California Title 20/24 Compliant

Passive Infrared (PIR) sensor detects motion with 180° field of view to automatically turn lights ON/OFF based on the occupancy or vacancy in a room

Features CDS technology, an automatic ambient light level sensing technology that remembers your ON/OFF behaviors to only turn lights ON at your preferred light level

Universal wiring design featuring interchangeable hot and load wires to make installation easier; no longer second guess which wire goes where

Universal Light Control - Switches Incandescent, CFL, LED, electronic low voltage and magnetic low voltage loads using relay technology

Low-Profile design eliminates an obtrusive "scanning device" look. Elegant styling compliments any interior

180 degree field-of-view provides approximately 900 square feet of coverage suitable for bathrooms, basements, garages and utility rooms

GY MULTITECH OCC SENS NO NEUTRAL

Product Type: OCCUPANCY SENSOR

CONVENIENT: automatically turns lights on/off based on motion. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – shallow design easily fits in the wallbox. 300W LED/CFL, 600W Incandescent/Halogen, 400VA Magnetic Low Voltage, 400VA Electronic Low Voltage, ¼ HP Motor, 5A Resistive

FLEXIBLE – for homes new or old, can be installed with or without a neutral wire. A ground wire is required for installation

LA PIR OCC SENS WALL SW 180D W/NIGHTLITE

Product Type: OCCUPANCY SENSOR

CONVENIENT: automatically turns lights on/off based on motion. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – slim profile fits in most wallboxes. 600W LED/CFL 1800W Incandescent/Halogen 1200VA Magnetic Low Voltage/Electronic Low Voltage/Fluorescent, 1/2HP Fan, 15A Resistive

FLEXIBLE – single pole, 3-way when used with DD0SR switch companion or multi-sensor with two DOS15 sensors in application where two sensors are needed for the coverage area, such as a “L-shaped” room

Single Pole

Combines occupancy/vacancy sensing with 0-10V dimming

Customize spaces with easy programming and configuration from a smart device. The Smart Sensor App can be used to configure and enable additional features like sensor sensitivity, timeouts, daylighting and more. Smart Wallbox Sensors also feature an out-of-the-box default mode for auto-ON/auto-OFF operation with a 20-minute timeout as well as convenient pushbutton programming for common room settings.

Select the operating mode for auto-ON/auto-OFF (occupancy) or manual-ON/auto-OFF (vacancy) using the Smart Sensor App.

Detection Range: 180°

Power Source:110-220V/AC

Detection Distance: 49Ft max(<24℃)

EB MULTITECH OCC SENS NO NEUTRAL

Product Type: OCCUPANCY SENSOR

PIR and US technology for performance and sensitivity

Controls two separate lighting loads from a single unit

Manual-ON only for the secondary relay

Quick snap feature for easy installation

Interchangeable 360-Degree high bay, low bay and aisle lens included

Integrated rotating adjustable light sensor and 24 hour auto-calibration for "set-it and forget-it"

CONVENIENT: automatically turns lights off when room is vacant. Provides 180° Field-of-View, 900 sq. ft. of coverage

EASY TO INSTALL – slim profile fits in most wallboxes. 150W LED/CFL, 250W Incandescent/Halogen, 200VA Magnetic Low Voltage, 250VA Electronic Low Voltage, 2A Resistive

FLEXIBLE – for homes new or old, can be installed with or without a neutral wire. A ground wire is required for installation

Power input: 120VAC, 60Hz ONLY

Power output: 24VDC, 100mA (Class 2)

Control input: 24VDC, 5mA

Adorne SofTap dimmer by LegGrand lighting.

White finish plastic construction.

Tru-universal technology enables dimmer to control all load types.

Perfect for anywhere you’d like the combined power of on/off and dimmable lighting control options. This 700W version of the Paddle Dimmer Switch is meant for single fixtures and small lighting groups that do not exceed a total wattage of the number of bulbs multiplied by their respective wattages.

The adorne Paddle Dimmer Switch is a beautifully inventive solution to total lighting control – turn lights on and off with a simple rocking motion, or slide to dim. Time to install: 15 minutes or less.

Use on its own to control a light from one location (single-pole operation) or pair with a second switch or dimmer to control a single light source from two locations. Fits existing electrical box and does not require new wires for typical installation. (three-way operation).

Fits in standard wallbox and replaces single-pole wall switch Fits in standard wallbox and replaces single-pole wall switch Convenient pushbutton provides manual-ON/OFF light switching at any time Convenient pushbutton provides manual-ON/OFF light switching at any time Vandal resistant PIR lens Light sensor enables the load hold-OFF feature once level has been set