Best Cir Kit Concepts Dollhouse Furniture in 2026

Our plug-in transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Kit Concepts' transformers are designed to plug directly into a powered outlet, thus eliminating the need of building a special transformer enclosure within the dollhouse.

Input: 120 vac 60 hz 17 watts. Output: 12 vac 10 watts. Up to 16, 60ma 12v GOW bulbs. Or 23, 40ma 16 GOW bulbs. Or 5, 20 ma spotlights or bright fluorettes.

Dimensions, inches: 2W x 2 1/2H x 2D.

Dollhouse Miniature

Provides a transformer to dollhouse electrical interconnection and may be used with any screw-terminal type transformer.

Overall length, approximately 6 feet.

1:12 Scale. This is sized for a dollhouse.

Cir-Kit Concepts is proud to announce its latest marvel, a push-in, pull-out chandelier adapter. For the first time ever, chandeliers can now be made removable using the ceiling plate that is part of most chandelier designs.

The secret of these adapters lies in the use of specially designed spring-loaded eyelets. These eyelets firmly grasp the adapter and securely hold the chandelier to the ceiling. Tests have shown them capable of holding fixtures in excess of four ounces. Most chandeliers weigh in at less than an ounce.

The brass-plated finish and flush fit results in a matching and beautifully coordinated ceiling plate assembly. When attached they will, in most instances, appear as an integral part of the chandelier ceiling plate itself.

This replacement heavyweight clear glass ceiling shade fits CK508 and CK509 dollhouse lights.

This is the shade only. Light kit is NOT included.

1in to 1ft. 1:12 Scale. This is sized for a dollhouse.

Using the sconce adapter, a sconce may be installed on either a vertical or horizontal tape run and may be rotated up to 30 degrees in either direction for perfect alignment.

The adapter ring is fully brass plated making it suitable for even the most ornate of wall fixtures. Complete step-by-step instructions, with detailed illustrations, are included in each package.

2 Special spring-loaded eyelets (CK1023-6) are included with each adapter. These eyelets grip the adapter plug and ensure a tight fit against the wall.

From Cir-Kit Concepts collection of detailed dollhouse miniatures. This will make a nice addition to your miniature scene.

This three light chandelier has CK1010-29 replaceable bulbs.

Includes CK806-1 black ceiling adapter.

Our table top transformers provide a safe and convenient power source for any dollhouse or miniature room. All Cir-Kit Concepts' transformers are designed to plug into a powered outlet, thus eliminating the need of building a special transformer enclosure within the dollhouse.

Class 2. Input: 120 vac 60 hz 48 watts. Output: 12 vac 40 watts. Circuit breaker protected. Up to 64, 60ma 12v GOW bulbs. Or 100, 40ma 16 GOW bulbs. Or 20, 20 ma spotlights or bright fluorettes.

Dimensions, inches: 2 5/8W x 2 3/4H x 2 1/8D.

Using the sconce adapter, a sconce may be installed on either a vertical or horizontal tape run and may be rotated up to 30 degrees in either direction for perfect alignment.

The adapter ring is fully brass plated making it suitable for even the most ornate of wall fixtures. Complete step-by-step instructions, with detailed illustrations, are included in each package.

2 Special spring-loaded eyelets (CK1023-6) are included with each adapter. These eyelets grip the adapter plug and ensure a tight fit against the wall

Provides a transformer to dollhouse electrical interconnection and may be used with any screw-terminal type transformer. One end of the wire is equipped with a plug for connection to the CK1007 Junction Splice on the dollhouse and the other with spade lugs for connection to the transformer output terminals.

This lead-in wire may be used for those installations requiring the convenience of total dollhouse on/off power control. (Eliminates need for unplugging lead-in wire from dollhouse to disconnect power.)

Includes added in-line fuseholder. Can be used for protection of any transformer with screw terminals. The fuse holder is a threaded assembly and accepts all Cir-Kit fuses.

From Cir-Kit Concepts collection of detailed dollhouse miniatures. This will make a nice addition to your miniature scene.

This three light chandelier has CK1010-29 replaceable bulbs.

Includes free CK806 Brass Plug-In Ceiling Plate.

The remarkable Cir-Kit Concepts' CK800 Ceiling Canopy makes any chandelier removable with just a "twist of the wrist". A quarter turn clockwise for installation and a quarter turn back for removal. Nothing could be simpler!

And the rich plating will compliment even the most ornate of hanging fixtures.

You're sure to agree it's the easiest method yet for installing ceiling chandeliers. Complete instructions included.

Ideal for back lighting or illuminating miniatures, these fluorescent shaped bulbs provide a unique and effective indirect lighting source. The clear bulbs display a brighter and more localized illumination.

Fuse-type snap-in/snap-out construction allows easy bulb installation and replacement.

Each bulb measures approximately 1/4" in diameter by 1-1/2" in length. Power consumption for the CK1018-1 bulb is 70 to 80 ma when connected across a 12-volt source.

From Cir-Kit Concepts collection of detailed dollhouse miniatures. This Ceiling Fan with lights will make a nice addition to your miniature scene.

This three light ceiling fan has CK1010-12 replaceable bulbs. Fan does not turn.

Includes ceiling adapter.

These sockets have been developed especially for use with the CK1010-5 and CK1010-12 series of wire terminal bulbs. When used with a CK1010-12 bulb they provide a "true-to-scale" candle look for miniature candlesticks, chandeliers and sconces.

When used with a CK1010-12 bulb they provide a "true-to-scale" candle look for miniature candlesticks, chandeliers and sconces.

Since the bulbs are merely plugged in, replacement in the event of failure is greatly simplified.

These high quality bulbs are excellent for illuminating any part of a dollhouse or miniature room.

Bulb wires may be attached to our miniature plugs or directly bradded into tape runs with 1/8" brass brads.

The grain-of-wheat (GOW) bulbs measure approximately 3/16" in diameter and draw between 40-60 ma.

The CK1026 in-line fuseholder is used in conjunction with the CK1024 series of fuses for system protection.

Easily assembled, the fuseholder connects directly into the lead wire between the transformer and dollhouse. Complete instructions are included with each package and no special tools are required.

Measures 2-1/4" long by 1/2" in diameter.

These sockets have been developed especially for use with the CK1010-5 and CK1010-12 series of wire terminal bulbs.

When used with a CK1010-12 bulb they provide a "true-to-scale" candle look for miniature candlesticks, chandeliers and sconces.

Since the bulbs are merely plugged in, replacement in the event of failure is greatly simplified.

The CK1019-1 has solder eyes for the connection and soldering of wires at each end.

Sockets measure approximately 3/16" wide by 1-5/8" long.

Detailed scale model for adult collectors. Not intended for children under 14

New Old Stock - In unopened package.

These sockets are designed specifically for the CK1018 series of fluorette bulbs. The clip-in type construction allows simple bulb installation and replacement.

The CK1019 is equipped with imbedded nails which automatically make electrical contact with the tape run when pounded in.

This tiny bit is a helpful aid for installing any of the various Cir-Kit Concepts' wiring and lighting fixtures. Their use greatly enhances and simplifies installation in all types of wood.

The 1/32" bit provides the proper size hole for wall sconce wires. This hole allows the pulling of sconce wires through a wall and electrically connecting them into a conductive tape run on the opposite side of a wall. (The wires are inserted into copper strip holes made with either a push pin or No. 70 bit).

Bit may be used with either a 1/4" electric drill or the CK201 Mini Drill.

Ideal for back lighting or illuminating miniatures, these fluorescent shaped bulbs provide a unique and effective indirect lighting source. The frosted bulb gives a uniform and diffused light over a large area whereas the clear bulbs display a brighter and more localized illumination. Fuse-type snap-in/snap-out construction allows easy bulb installation and replacement.

Each bulb measures approximately 1/4" in diameter by 1-1/2" in length. Power consumption for the CK1018-1 bulb is 70 to 80 ma when connected across a 12-volt source. The extra-bright Showcase Bulb draws approximately 220 ma of current. All fluorettes are warranted for 3,000 hours when used with a Cir-Kit Concepts' 12-volt transformer.

Mate with CK1019 and CK1019-1 sockets. 2,500 hour bulb life.

These high quality bulbs are excellent for illuminating any part of a dollhouse or miniature room. Bulb wires may be attached to our miniature plugs or directly bradded into tape runs with 1/8" brass brads.

The grain-of-wheat (GOW) bulbs measure approximately 1/8" in diameter and draw between 40-60 ma.

Detailed scale model for adult collectors. Not intended for children under 14.

These are the easiest to install ceiling lights yet! Nails imbedded in the globes allow pounding of the fixture directly into a tape run with no additional wiring or electrical connections.

Apply power and, presto, you have an instant working ceiling light. The CK842 is approximately 3/8" in diameter.

Contains a 12-volt GOW bulb drawing approximately 60 ma of current.

This tiny bit is a helpful aid for installing any of the various Cir-Kit Concepts' wiring and lighting fixtures. Their use greatly enhances and simplifies installation in all types of wood.

The No. 75 bit allows drilling of small .021" holes at tape juncture points for easy insertion of 1/8" brads in hardwood or Masonite structures. (May also be used for outlet and switch nails.) The drilling of holes simplifies brad installation and assures a tight electrical fit between the brad and copper strip.

Bit may be used with either a 1/4" electric drill or the CK201 Mini Drill.

Same as pictured, but with brown wires.

These high quality bulbs are excellent for illuminating any part of a dollhouse or miniature room. Bulb wires may be attached to our miniature plugs or directly bradded into tape runs with 1/8" brass brads.

The 12-volt bulbs should be used in locations where bright illumination is necessary.