Best Metal Earphones in 2026

[2.4GHz Wireless]- 2.4GHz wireless in-ear monitor system create your personal or team monitor systemm,it works anywhere in the world—ready to go where the tour goes

[90ft Working Range]- Over 90 feet of range is perfect for small clubs and venues, also you can send audio wirelessly to performers onstage

[6 Channel & Less Than 5ms Latency]- Less than 5ms of latency for distraction-free performance, simultaneous broadcasts on 6 channels

【Great 2.4GHz Band】2.4GHz wireless in-ear monitor system create your personal or team's monitor system. uncompressed wireless signal transmission, low noise and latency.Mono balanced XLR or mono unbalanced TS input.Provides smooth frequency response with any headphones.

【Less than 4.5ms Latency】Simultaneous broadcasts on 6 channels no-interference, Less than 4.5ms Latency(normal),Up to 107 dB signal-to-noise ratio provides clear, detailed audio at any volume. High Resolution 24-bit/48kbps audio. Broad 20Hz-20KHz frequency response，Dynamic Rang 107 dB.

【Efficient Power Circuit and Listening Effect】 Rechargeable Lithium Battery，7 hours of battery life(normal),comes with power cable,ensures great performance for your every show.Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch monitoring has the headphone jack.it can replace traditional complex sound monitoring equipment,achieve admirable listening effect.

WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.

DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable

WIRELESS PERFORMANCE: This UHF stereo wireless in-ear audio monitor system operates in 900Mhz Band UHF, interference-free by utilizing UHF-wide audio signal transmission (Up to 6 systems can operate simultaneously). It enables users to move freely on the stage and in the studio with a coverage of 140 – 164ft. in open space and line of sight. *For longer distances, please avoid thick walls, glass, and metal blocks.

HIGH-END QUALITY AND DESIGN: Elegant, sleek design for in-ear monitor transmitter and receiver. Simple setup with uninterrupted frequency to optimize sound performance for this wireless IEM system. The metal transmitter of this studio audio monitor has an LCD panel to provide system details, including channel, group number,stereo mode selection, lock feature, and RF indicator. Good quality earphones enhance purer sound performance for studio and stage wireless monitors.

STEREO FUNCTION FOR PROFESSIONAL USE: This quality stereo IEM in ears for singers works perfectly in various sound-monitoring events, both small and large venues, ideal for on-stage performance, studio recording, exhibit, lecture, instruction, speech, etc. The package also includes metal racks that facilitate more professional use. Users can select the stereo mode for both the transmitter and receiver to enjoy the stereo performance of the system.

【2.4GHz Wireless IEM System】MS-1 wireless in-ear monitor system adopts 2.4G wireless transmission, with lossless sound quality, low noise/lowlatency. One-Key to change mono/stereo input, providing smooth frequency response with any earphones.

【Auto-Pairing】The transmitter and receiver can pairing automatically, no need to manually tune the channel. Turn on the power, long press the two "PAIR" buttons at the same time to pair, wait until the green light is on, the pairing is successful and use. That's how simple it is.

【Low Latency&Long Battery Life】Built in Rechargeable Lithium Battery, it can last up to 5 hours per use after a full charge, make suring your show is complete and perfect!! Less than 12ms Latency,24-bit/48kbps high resolution, Broad 20Hz-20KHz frequency response,Dynamic Rang 105 dB.

UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Improved comprehensive performance, anti-frequency drop, anti-series frequency. Frequency range: 550 MHz-580 Mhz. In the 32MHz frequency band, the preset 40 frequencies can be switched at will. The dynamic expansion circuit greatly improves the signal-to-noise ratio

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect

DESIGN FEATURES(APPERANCE AND DISPLAY)-Wireless in ear monitor system with elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable.

【Great UHF Band】520-580Mhz wireless in-ear monitor system create your personal or team's monitor system. uncompressed wireless signal transmission, low noise and latency. Provides smooth frequency response with any headphones.

【Extensible Monitor system】 With one transmitter, no matter how many bodypack are added, the bodypack and transmitter can work properly as long as they have the same frequency. No quantity limit. Good quality earbuds provide pure sound and enhanced performance. It works perfectly in various sound-monitoring events, stage performance, studio recording, exhibit, lecture, instruction, speech, etc. The package also includes with standard rack unit.

【180 Feet Operation】 Using advanced circuit design, great chips, clear the receiving blind angle to make the system's receiving signal steady. Enables users to move freely with 160ft - 180ft operating distance in open space. the transmitter is made by tough metal material. It is the best choice of monitor product.

Dynamic full-range transducer for high-resolution, powerful monitoring sound

2 in 1 bundle: Bluetooth module for wireless connection to mobile devices, PCs or tablets, with a built-in microphone for calls or standard 3.5 mm jack-plug cable

Excellent shielding through optimized earpiece shape and flexible silicone and foam attachments

WIRELESS PERFORMANCE: This mono wireless in ear monitor system operates in UHF band with 50 selectable frequencies ( 6+ units can work together). NO LATENCY by utilizing UHF wide audio signal transmission. Wireless design for less clutter on stage, enables users to move freely with 140ft - 164ft operating distance in open space, line of sight. *For longer distance, please avoid thick walls, glass, and metal block

MONO DESIGN, SEPERATE OUTPUTS: Elegant sleek design with metal construction for transmitter base unit. Black carrying case for safe-keeping. Left and right inputs for personal audio mix with clear mono sound monitoring. The wireless IEM system also runs a left/right line out back to the soundboard or speaker. It allows original audio signal pass through the PTM-11 transmitter without being affected

SIMPLE SETUP WITH VERSATILE USE: Simple setup with uninterrupted frequency to optimize sound performance for this personal monitor system. Good quality earbuds provide pure sound and enhanced performance. The UHF in-ear monitor system works perfectly in various sound-monitoring events, stage performance, studio recording, exhibit, lecture, instruction, speech, etc. The package also includes necessary tools to work with standard rack unit

【2.4GHz Wireless IEM System】This wireless in ear monitor system adopts 2.4G wireless transmission which is allowed to be used free worldwide, making pairing easier. Just plug and play. Features with high signal stability, anti-interference and short audio delay. No drop with 50-65 feet. Powered by built-in lithium batteries and can be used for up to 6 hours. Provide perfect audio monitoring for your personal stage or team stage.

【One to More】Switch between built-in 6 channels to prevent possible interference from other devices. Set all transmitter and receivers on the same channel, one transmitter can be connected with many receivers. Please purchase additional receivers for the people in the team according to your needs. Use the supplied TYPE-C charging cable to charge these devices. Both the transmitter and receiver have the remaining battery indicator to ensure that you can estimate how long they can be used.

【In Ear Monitor Earphones】Ergonomically shaped 45-degree angle in-ear earbuds provide comfortable and secure fit for better soundproofing and prolonged use. Both cables offer the form-fitting cord to go over the back of your ears. So this studio monitor headphone won't fall out easily. Enhanced bass, mids and treble is extremely rich and energetic. Excellent noise reduction ability makes it suitable for stage performance and recording studio monitoring.

Consumer Alert: Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device.

The ideal monitoring solution for up to two performers

Perfect for Musicians

Target consumer: musicians

Important Notice: B-7PSM is designed for band rehearsals and live performances, prioritizing the best possible STEREO experience. you'll enjoy the product and the experience it provides. While it may not be suitable for personal silent practice.

Operation Length: > 100 feet (30m) Outdoor unobstructed, >33 feet(10m) Outdoor with obstructions

Latency: < 5.5 ms

Xvive U4T9 Wireless IEM System,U4 Wireless IEM System with T9 Dual Balanced-Armature Drivers in-Ear Monitor Earphone

Dual Balanced-Armature Drivers-T9 IEM has carefully selected, and customized drivers designed to deliver full‐range, dynamic, tactile, and detailed audio, to be fun for music lovers, at home on stage and equally useful in the recording studio.

BASS,MID-HIGH Frequency-We took the industries' largest and most capable low frequency driver and paired it with a specially tuned and tweaked mid‐high driver to create a responsive and detailed sound signature

Featuring Mixed mono mode

4 receivers and 1 transmitter; 275 selectable channels

Uhf phase Locked loop

GET BACK YOUR CONNECTION - The 3DME G2 is the only in ear monitoring system with built in active ambient mic's! These patented ear monitors allow you to control the outside sound you want in your ears, while still keeping the same quality you love about your iems. Your ears - your mix!

YOU CONTROL THE AMBIENT SOUND - These unique in ear monitors for musicians use patented miniature microphones which you control. Now you can bring back your connection with your bandmates and your audience without ever having to pull your earpiece out.

PATENTED ACTIVE SIGNAL PROCESSING - These in ears for musicians offer a distortion-free ambience capture up to 135 dB-SPL. A programable sound limiter ensures controlled isolation from potentially damaging sound pressure levels.

Designed to fit most half-rack wireless in-ear personal monitoring systems

Rugged nylon exterior and heavy-duty padded interior

Storage for transmitter, earbuds, receiver body pack, and power supply

High quality sound---Install high-performance chips to reduce the transmission loss of sound quality, so that the restoration rate of sound reaches 99%.

Unlimited increase of receivers---One transmitter supports unlimited number of bodypack receivers for simultaneous use, please purchase additional receivers for people in your team as needed.The newly added receiver automatically matches the channel with the original transmitter when it is turned on.

Stable signal transmission ---Signal transmission distance is 82ft (25m),High signal stability. The sound without delay,Stereo,Just plug and play.

The PRO UHF Wireless In Ear Monitoring System: D Debra audio's new UHF system with phase-locked loop PLL. It using high-quality IC chips, improves the overall performance, anti-frequency reduction, anti-series frequency, has a stronger and more stable signal, better signal to noise ratio. The frequency range is 510 MHz-580 MHz. The preset 100 frequencies for each channel can be switched at will, which can better avoid signal interference.

Suitable For Multiple Places: Built-in limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch monitoring has the headphone jack. Back panel have 3.5mm mixed input and two independent integrated interface input, as well as a 6.5mm mixed output. Good used in stage, broadcast, recording studio, musicians, band performance.

Feature Design: The transmitter has LCD display panel, RF and AF display. The receiver is equipped with LCD display, power supply and RF receiving indicator. The panel can monitor battery power.

In Ear Monitor System (Transmitter + Receiver) with High Quality Metal Earphones

Zero Latency / Lossless 2.4Ghz Wireless Audio Transmission up to 90 feet

5 Hours Battery Life on both the Transmitter and Receiver

UHF frequency range with 6 selectable channels（561-568MHZ）

One transmitter can be operated with multiple receivers within the operating range

Long operating range up to 100m

【In-Ear Monitor Earphones】Ergonomically shaped 45-degree angle in-ear earbuds provide comfortable and secure fit for better soundproofing and prolonged use. Both cables offer the form-fitting cord to go over the back of your ears. So this studio monitor headphone won't fall out easily. Enhanced bass, mids and treble is extremely rich and energetic. Excellent noise reduction ability makes it suitable for stage performance and recording studio monitoring.

【2.4GHz Wireless IEM System】This wireless in-ear monitor system adopts 2.4G wireless transmission which is allowed to be used free worldwide, making pairing easier. Just plug and play. Features with high signal stability, anti-interference and short audio delay. No drop with 50-65 feet. Powered by built-in lithium batteries and can be used for up to 6 hours. Provide perfect audio monitoring for your personal stage or team stage.

【One to More】Switch between built-in 6 channels to prevent possible interference from other devices. Set all transmitter and receivers on the same channel, one transmitter can be connected with many receivers. Please purchase additional receivers for the people in the team according to your needs. Use the supplied TYPE-C charging cable to charge these devices. Both the transmitter and receiver have the remaining battery indicator to ensure that you can estimate how long they can be used.

Stable Signal: The wireless earphone monitor system supports the preferred XLR loop out (true straight through), connecting the signal to a mixing console, additional IEM system or recording device without signal degradation.

Anti Interference: This studio monitoring system's adjustable squelch eliminates annoying static frequency guide sound and prevents RF interference when the transmitter is turned off. Portable system can be quickly loaded and set up.

High Performance: Professional stage ear monitor system reduces stage sound clutter for a better overall mix and less feedback. Use any number of stereo receivers on the same frequency (with separate mixes).

Professional: Up to 8 simultaneous systems per band, three receiver modes, individual mix, stereo and mono. Individual mix control allows control of the volume and mix of two separate signals at the receiver.

Working Principle: Wireless ear monitor system combines HiFi sound with a clear mix, allowing players to hear themselves clearly at lower volumes. Suitable for exhibition live broadcast listening, stage return monitoring.

Stable Signal: The wireless earphone monitor system supports the preferred XLR loop out (true straight through), connecting the signal to a mixing console, additional IEM system or recording device without signal degradation.

⭐4 Channels IEM - With 4 channels of monitoring system, each channel has 16 frequency points can be selected, the perfect solution to the problem of signal interference. Each monitor is equipped with 4 bodypack receivers and 1 transmitter.

⭐Unlimited increase bodypack receiver - Can be used according to the number of people, buy another bodypack receiver, increase the number of bodypack receivers to meet the needs of multiple simultaneous use of stage performances.

Mono input and output - Using high-performance chips to reduce sound transmission loss and achieve 99% sound reproduction.