Best Gm Electric in 2026

High Quality OEM Replacement Part; Fit and Quality Guaranteed; Direct Replacement

Electric Fuel Pump Replaces Part Number: 4011545, 4011492, 4010658, 4170020, E11005

Fitment: Replacement For Polaris Ranger 400 2009-2012; Replacement For Polaris Ranger 500 1999-2008

External Fuel Pump is made of high-density brass and steel alloy, with high hardness, not easy to wear, not easy to corrode, and has a long service life

Package Include: 1 x External Fuel Pump, 2 x Rubber Connection Cover, 2 x Terminal, 1 x Large Gasket, 1 x Small Gasket, 1 x Large Nut, 1 x Small Nut

This is a universal fit pump and depending on your application some adapting will be required, Installation may require skill and knowledge, no instructions are included

The DIY pump Kit is easily to install , Widely used in many areas such as: auto marine boat diesel car motorbike , agricultural irrigation, drinks transfer, garden cleaning,summer cooling, industrial applications,DIY and so on

Portable for travel, Small size, DC 12V If you want to connect this pump to AC power, you will need a power converter

Maximum Pressure: Max. 0.8MPA，Maximum Flow: 4L/min, Rated Power: 60W

𝐄𝐋𝐄𝐂𝐓𝐑𝐈𝐂 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Model: HEP-02A; Material: Copper Clad Aluminum; Voltage: 12V; Current: 2A; Output Pressure is 3-6 psi, Pressure : 0.032-0 .045 MPA; which can reach 80-100 (liters/hour) per hour, and the oil absorption capacity is strong enough to ensure the supply of fuel.

𝐈𝐍-𝐋𝐈𝐍𝐄 𝐅𝐔𝐄𝐋 𝐏𝐔𝐌𝐏: Fits 5/16 "Oil Pipe, 5/16" Joint Or Connector At Each End, Transparent Plastic Shell, Orange Inner Filter, With Metal Brass End Caps On The Top And Bottom Of The Filter, Filter Out Impurities And Precipitation In Gasoline, Reduce Parts Wear And Protect The Engine, Direct Installation, Simple And Convenient.

𝐖𝐈𝐃𝐄 𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍: You Will Get A Universal 12V (3-6PSI) Electric Fuel Transfer Pump + 2m/79-Inch Reinforced Fuel Pipe + 5/16-Inch Fuel Filter + 10 Hose Clamps. The kit fit all 12 Volt Cars (such as Toyota, Ford, Honda, Mazda, and any other suitable car), Trucks, Boats & Generators, Lawnmower.

For specific V-6 and V-8 MerCruiser stern drive engines made by General Motors with the brass sea water pump and v-belt engine accessory pulley and electric fuel pumps.

Plastic housing resists corrosion in saltwater installations

See your owner's manual or service manual for specific applications and installation instructions.

Manufactured in America with U.S. and global parts. A 12-volt powered transfer pump that quickly transfers gas or diesel with minimal effort. This model pumps up to 30 gallons per hour and can lift fluid up to 6 feet high.

Dry lift and siphon fuel from most vehicles, boats, and other equipment. This is a must have prepper tool. See more options by clicking on "Visit the GasTapper Store" at top of page.

A 12V power source is required to operate this unit. Simply plug it into a 12V vehicle accessory plug or use a portable battery. See our portable battery equipped with a 12V receptacle in our store.

For specific V-6 and V-8 MerCruiser stern drive engines made by General Motors with the brass sea water pump and serpentine belt engine accessory pulley and electric fuel pumps.

Plastic housing resists corrosion in saltwater installations

See your owner's manual or service manual for specific applications and installation instructions.

We have 2 similar pumps: Z789 ASIN: B09Z4Q2TBL; Z798 ASIN: B0B4BXG7J8. The difference is the vacuum pipe. The vacuum pipe of Z789 is fixed in the position and cannot swivel. The vacuum pipe of Z798 need to be installed by yourself and you could choose any direction you needed. You could click: https://www.amazon.com/dp/B0B4BXG7J8

We mark size of the brass fitting in picture. If the brass fitting is too small to fit hose on the motor and you cannot fix it, do not buy it.

Compatible with Mercur. 35 50 60 115 225 HP Outboard 2 Stroke ; Compatible with 14360A16 14360A41 14360A43 14360A50 14360A71 14360A73 14360A78

BASIC PARAMETERS: The rated head of the impeller pump is 5m, and the rotational speed is 2900RPM with stable performance.

APPLICABLE SCENARIO: Impeller pumps are suitable for lubricants and viscous liquids and can be used to transport brine, water, lubricants and mechanical fuels.

WIDE APPLICATION: The self priming impeller pump is suitable for ship, RV, automobile and agricultural application, has strong practicability.

WIDE APPLICATION: The self priming impeller pump is suitable for ship, RV, automobile and agricultural application, has strong practicability.

RED COPPER MOTOR: The impeller pump uses a full purple copper wire motor core, with a sturdy appearance and reasonable design to give this pump a longer service life.

BASIC PARAMETERS: The rated head of the impeller pump is 5m, and the rotational speed is 2900RPM with stable performance.

【MODEL】HEP02A, Output Pressure: 4-7PSI，Input Voltage: 12 Volt, Current: 1-2A Flows: 80-90 (L/h)(A),Compatible Electronic Devices All 12 Volt Cars , Trucks , Boats & Generators

【CROSS-REFERENCE】E8012S, FD0002, P60430, EP12S, 6414671

【MATERIAL】100%Brass(Does Not Contain Aluminum),Cable Length: 12"/300mm; Inlet and outlet Diamter: 8mm/0.315 inch ,Installation hole distance: 6.7cm/2.638 inch