Best Screw Electrical Light Switches in 2026

WIRELESS BRIGHTNESS CONTROL: Turn your lights on or off and dim them with Z-Wave. Works with all of the LED's other dimmers flicker with (120 VAC only, no 0-10V control)! Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).

NEW 700 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. Each dimmer will act as a signal extender making your smart home mesh reliable. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!

SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with direct connection to power and neutral (check your boxes before buying).

WIRELESS BRIGHTNESS CONTROL: Manual or remote on/off and dimming control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately. Smart speakers are NOT Z-Wave hubs). Reports status instantly.

NEW SIMPLE DIRECT 3-WAY: Patented solution for 3-way and 4-way installations! No add-on switch needed, no need to rewire the other boxes. Just wire the ZEN74 dimmer in the box with direct connection to power (it needs to replace an existing 3-way switch) according to the appropriate diagram. Works with mechanical 3-way switches (DON'T connect to other dimmers) as long as NEUTRAL is present.

NEW 700 SERIES MODEL: Just 1.1" deep to easily fit in crowded and shallow boxes. 700 series Z-Wave chip for faster response time and better wireless range boosted by optimal antennae positioning. Remembers and restores on/off status after power failure. Do NOT use as direct replacement for the ZEN24 model in 3-way set-ups, always follow the wiring in the manual.

FASTER Z-WAVE: Add wireless on/off control to your lights when you connect this switch to your Z-Wave system (hub required, sold separately). The NEW 700 Series chip ensures more range and faster communication. Compatible hub needed for voice control.

DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21 model. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!

BETTER FIT: The new model is just 1.16" deep so it's easier to install it in a shallow or crowded box! There are no heat sink tabs either, just place it next to the other switches in a multi-gang box. And if you need a different color paddle, just ask Zooz for light almond, brown, or black options (NOT included, sold separately) - the white paddles can be replaced.

MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.

POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).

EASY INSTALLATION: Pigtail wires for convenient connections. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

VERSATILE APPLICATION: Push-button control for garbage disposals. Can be used with Z-Wave dimmer modules for local dimming control (NOTE: THIS IS NOT A Z-WAVE DEVICE).

MOMENTARY CONTROL: Press and hold to trigger the motor in your garbage disposal, release to stop. Tap to turn on the light, press and hold to adjust brightness, tap again to turn off the light when using with a Z-Wave dimmer module.

FLEXIBLE INSTALLATION: Accepts 14 AWG and 12 AWG wires. Works with loads up to 15 A.

SMART RELAY FOR ON/OFF CONTROL: Install this relay to add Z-Wave to the existing wall switch and keep your favorite switch style and color. The relay output is dry contact for your unique applications outside of lighting but note the input (switch) requires 120 V which makes it perfect for 120 V signal monitoring on sump pumps or motion lights. For a dry contact input device, look up ZEN16.

3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way set-ups as well. Even if you don't have neutral available at any of the switch boxes, you can always install this relay at the light fixture where you'll have access to power and neutral. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.

EASY INSTALLATION: Pigtail wires for convenient connections. Connect to mechanical on/off or momentary switches only (NO dimmers or electronic / smart switches). The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.