Best Zooz in 2026

VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A.

DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!

RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards.

WIRELESS BRIGHTNESS CONTROL: Turn your lights on or off and dim them with Z-Wave. Works with all of the LED's other dimmers flicker with (120 VAC only, no 0-10V control)! Hub required (sold separately), scroll down for compatibility. Voice control with Z-Wave hub ONLY (will NOT work directly with your smart speaker).

NEW 700 SERIES Z-WAVE: Boost your network with the latest Z-Wave technology that offers more range and faster communication speed than ever before. Each dimmer will act as a signal extender making your smart home mesh reliable. And if you need to troubleshoot connectivity issues, access a built-in range test tool straight from the switch!

SIMPLE 3-WAY & 4-WAY: Use it with existing on/off switches (NO dimmers) in your 3-way, 4-way, or 5-way set-up, even if load and line are not in the same box. No need for add-on switches, no need to rewire other boxes. Just wire the Zooz in the box with direct connection to power and neutral (check your boxes before buying).

WIRELESS BRIGHTNESS CONTROL: Manual or remote on/off and dimming control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately. Smart speakers are NOT Z-Wave hubs). Reports status instantly.

NEW SIMPLE DIRECT 3-WAY: Patented solution for 3-way and 4-way installations! No add-on switch needed, no need to rewire the other boxes. Just wire the ZEN74 dimmer in the box with direct connection to power (it needs to replace an existing 3-way switch) according to the appropriate diagram. Works with mechanical 3-way switches (DON'T connect to other dimmers) as long as NEUTRAL is present.

NEW 700 SERIES MODEL: Just 1.1" deep to easily fit in crowded and shallow boxes. 700 series Z-Wave chip for faster response time and better wireless range boosted by optimal antennae positioning. Remembers and restores on/off status after power failure. Do NOT use as direct replacement for the ZEN24 model in 3-way set-ups, always follow the wiring in the manual.

FASTER Z-WAVE: Add wireless on/off control to your lights when you connect this switch to your Z-Wave system (hub required, sold separately). The NEW 700 Series chip ensures more range and faster communication. Compatible hub needed for voice control.

DIRECT 3-WAY SOLUTION: No add-on switch needed! Works with regular 3-way switches as long as NEUTRAL is present. Wire it just like the ZEN21 model. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!

BETTER FIT: The new model is just 1.16" deep so it's easier to install it in a shallow or crowded box! There are no heat sink tabs either, just place it next to the other switches in a multi-gang box. And if you need a different color paddle, just ask Zooz for light almond, brown, or black options (NOT included, sold separately) - the white paddles can be replaced.

2 SMART OUTPUTS: Control 2 dry contact relays independently with one Z-Wave device. Choose from normally closed (10 A) and normally open (20 A) relays to automate almost any electrical device. Connect an optional wall switch for physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels.

2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically.

AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A.

SMART RGBW CONTROL: Change colors and hues, adjust brightness, and turn DC RGBW LED strips on or off from your Z-Wave hub (required, sold separately). Alexa is NOT a Z-Wave hub. Does NOT work with Wink and Z-Wave alarm panels. Custom driver required for works with SmartThings, contact seller for details.

HOW IT WORKS: You'll need a 12 or 24 V DC (not AC!) power supply depending on your LED strip requirements to power both the strip (sold separately) and the RGBW Dimmer. Do NOT exceed 120 W total for 12 V DC strips or 240 W total for 24 V DC strips! Do NOT use with addressable LED strips. Add the RGBW Dimmer to your Z-Wave hub to get wireless control of your lighting. Program schedules, and create custom scenes (if this functionality is supported by your hub).

EXTRAS: Enjoy more smart features like energy monitoring, scene control (double tap), and SmartStart (your hub needs to support these features). Add physical control of the light by connecting an on/off or momentary wall switch to the RGBW Dimmer, the Zooz ZAC99 model will work great. You can also use the 4 input terminals to monitor analog low voltage sensors and add Z-Wave to even more devices around you!

MULTI-FUNCTIONAL DIMMER: Smooth brightness control for incandescent and LED bulbs (up to 75 Watts of LEDs). Smart bulb ready! Double tap to full brightness, adjustable ramp rate, and dimming speed (your hub needs to support advanced setting input). NO DIRECT 3-WAY, only virtual 3-way available. Contact support for details.

POWERFUL RELAY: Connect any load up to 15A, including ceiling and exhaust fans for reliable on/off control from the relay button and via Z-Wave. Or use the button for scene control (multi-tap supported by select hubs only, contact support before buying).

EASY INSTALLATION: Pigtail wires for convenient connections. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight.

EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet.

COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo).

VERSATILE APPLICATION: Push-button control for garbage disposals. Can be used with Z-Wave dimmer modules for local dimming control (NOTE: THIS IS NOT A Z-WAVE DEVICE).

MOMENTARY CONTROL: Press and hold to trigger the motor in your garbage disposal, release to stop. Tap to turn on the light, press and hold to adjust brightness, tap again to turn off the light when using with a Z-Wave dimmer module.

FLEXIBLE INSTALLATION: Accepts 14 AWG and 12 AWG wires. Works with loads up to 15 A.

4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.

NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance.

CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input).

EXTRA FEATURES: Adjustable motion sensitivity and retrigger time. Built-in Z-Wave range test tool for easier network troubleshooting. Vibration reports on SmartThings and other selected gateways.

2 POWER SOURCES: Runs on a single battery for up to a year (depending on traffic and settings) OR on micro USB cable (NOT INCLUDED). Acts as signal extender when connected to USB.

FLEXIBLE DESIGN: Extremely small and light, the sensor sits in a perfectly shaped magnetic mounting base for precise and firm positioning.

SMART RELAY FOR ON/OFF CONTROL: Install this relay to add Z-Wave to the existing wall switch and keep your favorite switch style and color. The relay output is dry contact for your unique applications outside of lighting but note the input (switch) requires 120 V which makes it perfect for 120 V signal monitoring on sump pumps or motion lights. For a dry contact input device, look up ZEN16.

3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way set-ups as well. Even if you don't have neutral available at any of the switch boxes, you can always install this relay at the light fixture where you'll have access to power and neutral. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.

EASY INSTALLATION: Pigtail wires for convenient connections. Connect to mechanical on/off or momentary switches only (NO dimmers or electronic / smart switches). The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

SMART DOUBLE RELAY: Control 2 loads independently with just one Double Relay. It's perfect for double gang boxes - simply install the relay behind your existing wall switches to make your lights smart. Connect to simple on/off or momentary mechanical switches only, NOT to dimmers or other electronic / smart switches. Z-Wave hub required, scroll down for details.

3-WAY COMPATIBLE: Unlike many other smart relays, you can use this device to automate 3-way switches as well. Keep your favorite wall control style even if it's a multiway set-up. Always follow the wiring diagrams carefully and make any programming changes if needed when installing this relay.

EASY INSTALLATION: Pigtail wires for convenient connections. The relay is small enough to fit in the most crowded box, just 1.5" x 1.4" and 0.7" deep. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards.

PREVENT WATER DAMAGE: Receive alerts on your phone when water is detected by the sensor once you include it to your Z-Wave hub (required, sold separately). Check below for compatibility. Pair with the Zooz Titan Water Valve actuator (sold separately) for a smart flood prevention system.

EXTRA SMALL: Place it under your appliances to monitor for leaks discreetly. It's OK if the device is splashed with water but it can't be fully submerged so keep that in mind when choosing the installation location.

NEW 700 SERIES CHIP: You get more Z-Wave range and longer battery life with this sensor. Better signal means more reliable and quicker reports to help you act faster in case of a leak.

TEMPERATURE SENSOR: Monitor air temperature in every room to get the most of your smart thermostat (sold separately). Make your home more comfortable with precise data sent by this smart sensor. Z-Wave hub required (sold separately, scroll down for compatibility).

HUMIDITY SENSOR: Increase the air quality of your bedroom or home office with humidity level reports you can use to trigger your smart humidifier (sold separately). Stay in full control of the environment you spend the most time in.

DISCREET & SECURE: Enjoy the minimal design of this device and extra small size that will help it blend into any interior. It comes with the 700 series Z-Wave chip offering longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication.

4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately).

FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power.

Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system.

TILT SENSOR: Monitor your garage doors or gates through the classic vertical or unique horizontal tilt movement (do NOT use for swinging doors or gates). Get notified when the door is open unexpectedly. Z-Wave hub required (sold separately, scroll down for compatibility).

SHOCK SENSOR: This device will also report acceleration for more creative security monitoring scenarios like cabinet or glass safety.

EXTRA SMALL & SECURE: Perfect for discreet mounting with a slim profile to fit most frames and surfaces. It's only 1.9" x 1". 700 series Z-Wave chip with longer range, better battery life, and the highest level of S2 security with SmartStart for fully encrypted communication.

Easy guided install: Neutral wire is required, standard wall plate size. No need to understand complex switch, wiring or master vs auxiliary switch configurations; The Kasa app guides you through easy step by step installation. Need 2.4GHz Wi-Fi connection

Control from anywhere: Monitor your light status. Turn electronics on and off from anywhere with your smartphone using the case app, whether you are at home, in the office or on vacation

Voice control: Enjoy the hands-free convenience of controlling the lights in your home with your voice via Amazon Alexa or Google Assistant; perfect for times when your hands are full or entering a dark room

Easy guided install: Neutral wire is required, standard wall plate size. No need to understand complex switch wiring or master vs auxiliary switch configurations; The Kasa app guides you through easy step by step installation. Need 2.4GHz Wi-Fi connection

Control from anywhere: Monitor your light status. Turn electronics on and off from anywhere with your smartphone using the Kasa app, whether you are at home, in the office or on vacation

Voice control: Enjoy the hands-free convenience of controlling the lights in your home with your voice via Amazon Alexa or Google Assistant; perfect for times when your hands are full or entering a dark room

Voice control: Kasa smart plugs that work with Alexa and Google Home Assistant. Enjoy the hands free convenience of controlling any home electronic appliances with your voice via Amazon Alexa or Google Assistant. Compatible with Android 5.0 or higher and iOS 10.0 or higher

Smart Outlet Control from anywhere: Turn electronics on and off your smart home devices from anywhere with your smartphone using the Kasa app, whether you are at home, in the office or on vacation

Scheduling: Use timer or countdown schedules to set your wifi smart plug to automatically turn on and off any home electronic appliances such as lamps, fan, humidifier, Christmas lights etc. The Kasa app is free and compatible with iOS 10.0 or later.

Voice control: Kasa smart plugs that work with Alexa and Google Home Assistant. Enjoy the hands-free convenience of controlling any home electronic appliances with your voice via Amazon Alexa or Google Assistant

Smart Outlet Control from anywhere: Turn electronics on and off your smart home devices from anywhere with your smartphone using the Kasa app, whether you are at home, in the office or on vacation

Scheduling: Use timer or countdown schedules to set your wifi smart plug to automatically turn on and off any home electronic appliances such as lamps, fan, humidifier, Christmas lights etc.

Voice control: Kasa smart plugs that work with Alexa and Google Home Assistant. Enjoy the hands free convenience of controlling any home electronic appliances with your voice via Amazon Alexa or Google Assistant

Easy set up and use: 2.4GHz Wi-Fi connection required. Plug in, open the Kase app, follow the simple instructions and enjoy

Scheduling: Use timer or countdown schedules set your smart plug to automatically turn on and off any home electronic appliances such as lamps, fan, humidifier, Christmas lights etc.

PEACE OF MIND: Set lights to automatically adjust with changing seasons so your family always comes back to a well lit home; you can also enable the Smart Away feature to randomly turn your lights on and off to look like you’re home even if you’re away (smart bridge, L BDG2 WH, required)

MOST CONNECTED: Caseta connects with more leading smart home devices – including Amazon Alexa, Apple HomeKit, the Google Assistant, Serena shades and Sonos – than any other smart lighting control brand (smart bridge required)

CONTROL YOUR WAY: Caseta puts the smarts in the switch so you can control your lights a variety of ways – via the free Lutron app, your voice, or from the wall. You can create personalized schedules to turn lights on/off at set times to best fit your everyday routines, or activate favorite lighting scenes with the touch of a button (smart bridge required)

Universal - Works well with just about any rocker switch and button of any appliance. Smart Bluetooth button pusher for your smart home. Supports Press mode/Switch mode/Custom Mode. With the included Add-on sticker, switch mode helps to turn your light on/off.

Easy to install and set up - Tape it right next to a rocker switch or button with a 3M sticker in 5 seconds. No swapping, no tools are required. Easy App operation within Bluetooth range.Used twice a day, the battery lasts approximately 600 days.

Timers - Use the SwitchBot App to schedule built-in timers, run without phone or Hub. Turn lights or home appliances on/off automatically even when you’re away. Free your hands.

The MEGA complete starter kit with more than 200pcs components, premium quality and 100% Compatible with Arduino IDE

Free pdf tutorial in the cd (33 lessons)

Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)

INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors. Supports single-phase up to 240VAC line-neutral; single, split-phase 120/240VAC; and three-phase up to 415Y/240VAC (no Delta). Panels with access only to busbars will need flexible sensors available from Emporia Energy.

24/7 ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. Light commercial 3 phase option available as a separate bundle. PROTECTED BY A 1-YEAR WARRANTY.

APPLIANCE MONITORING WITHOUT GUESSWORK: Add up to sixteen 50A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer, range, etc.

INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors. Supports single-phase up to 240VAC line-neutral; single, split-phase 120/240VAC; and three-phase up to 415Y/240VAC (no Delta). Panels with access only to busbars will need flexible sensors available from Emporia Energy. Includes DIY instructions, though a professional electrician is recommended.

24/7 ENERGY MONITORING: Monitor your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. Light commercial 3 phase option available as a separate bundle. PROTECTED BY A 1-YEAR WARRANTY.

APPLIANCE MONITORING WITHOUT GUESSWORK: Comes with sixteen (16) 50A sensors to accurately monitor your air conditioner, furnace, water heater, washer, dryer, range, etc.

【 APP Remote Control 】eWeLink APP enables you to control all SONOFF devices anywhere with one tap via iOS & Android smart phone, no distance limitation. The device has a small size, which only takes up a little space during installation

【Safety, Improved Further】 The external antenna of MINIR2 is moved to the interior, improving the use performance and safety.Pass the 2KV surge testing and also certified by ANATEL which ensures MINIR2 more secure in use.

【Compatible with A Rocker Light Switch】Turn on the light without opening the app on your way to the washroom in the evening, simply press the connected switch

Bundle Includes our Rachio 3 Smart Sprinkler Controller (Alexa and Apple HomeKit Compatible with Hyperlocal Weather Intelligence) & our Rachio Weatherproof Outdoor Enclosure (custom designed and fully weatherproofed for outdoor use to protect your Rachio controller).

Avoid watering in the rain. Exclusive weather intelligence plus automatically skips unnecessary watering with features like rain skip, wind skip, freeze skip, and more.

Control from anywhere with the easy-to-use app. Run sprinklers, view upcoming schedules, and observe your estimated outdoor water usage.

ADD OR MOVE SWITCHES WITHOUT RUNNING WIRES: RunLessWire’s Wireless Switch Kit is an easy, do-it-yourself solution to controlling your lights remotely. Save money and stress by not having to pull up the drywall and run wires when adding or relocating a switch. This self-powered wireless switch eliminates the need for wires, batteries, or internet access.

BASIC SWITCH KIT: This kit is for controlling 1 light source with 1 single rocker switch. The receiver (controller) is pre-connected to the single rocker switch and is perfect for moving a switch, adding a switch to control a pull-chain light, or adding an additional light fixture to a room without running wires to the switch.

INFINITE BATTERY AND EXCELLENT WIRELESS RANGE: RunLessWire’s wireless switches have a micro-generator that produces kinetic energy by pressing the switch, sending a signal to the pre-connected receiver. That means no batteries needed, ever! No need for wifi or bluetooth either, these wireless switches use RF technology with 150 ft range (or more), even going through walls.