Best Metric Electronic Indicators in 2026

Electronic indicator measures 0 to 0.5" (0 to 12.7mm) with 0.0005" (0.01mm) resolution and + or - 0.0008" accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications

LCD displays in both inches and metric units, and indicator has a flat back for stem/plate mounting

Absolute electrostatic capacitance-type linear encoder for accurate measurements

Absolute Encoder ensures all settings and readings maintained for the life of the battery (even when the power is turned off)

Preset, Zero-Set, inch/mm, +/- direction and GO/±NG functions SPC output

Face rotates 330° for use at various angles

LCD display converts between English and metric units, has five user-selectable resolutions with a maximum resolution of 0.00002”/0.0005 mm, an accuracy of + or - 0.00005”/0.0015 mm, and a total measurement range of 0 - 1.2 inches/0 - 30.4 mm

Sealed housing meets Ingress Protection Rating 30 (IP30) standards for dust and water protection

Displays maximum and minimum value hold, the difference between high and low values, and changes from green to red when user-defined tolerances are exceeded

Electronic indicator measures 0 to 25.4mm with 0.01mm resolution and + or - 0.03mm accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications

LCD readout displays measurements in metric units, go/no-go display lights red or green when upper and lower tolerances have been set, and indicator face can be rotated 330 degrees for reading from different angles

Stem has 8mm diameter and an M2.5X0.45 contact point thread mount

As compact as standard series 2 dial indicators

After the initial zero-setting with the origin button, the repeated absolute positioning is no longer necessary over the entire battery life

Employing the absolute linear encoder, the id-s always displays the spindle "absolute position" from the origin at power-on, also unlimited response speed eliminates over-speed errors

The new Calculation-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock. This is designed to prevent accidental changing of settings during operation

Improved parameter setting software makes it even easier to set all of the available parameters and determine and upload the proper coefficients for calculation.(optional)

FAST measurement frequency allows the user to increase the number of readings per second from 10 to 50

LCD display converts between English and metric units, has five user-selectable resolutions with a maximum resolution of 0.00002” (0.0005 mm), an accuracy of + or - 0.0001” (0.0025 mm), and a total measurement range of 0” - 2.4” (0 - 60.9 mm)

Sealed housing meets Ingress Protection Rating 30 (IP30) standards for dust and water protection, has an 8-mm diameter stem, a steel ball contact point, and a flat back

Displays maximum and minimum value hold, the difference between high and low values, alerts when user-defined tolerances are exceeded, and can be set to zero at any spindle position for measuring in either or both directions

Electronic indicator measures 0 to 0.5" (0 to 12.7mm) with 0.0001" (0.001mm) resolution and + or - 0.00012" accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications

LCD displays in both inches and metric units, and indicator has a flat back for stem/plate mounting

Absolute electrostatic capacitance-type linear encoder for accurate measurements

Metric LCD display has two user-selectable resolutions (0.0005 or 0.001 mm), an accuracy of + or - 0.0025 mm, and a total measurement range of 0 - 60.9 mm

Sealed housing meets Ingress Protection Rating 30 (IP30) standards for dust and water protection, has an 8-mm diameter stem, a carbide ball contact point, and a flat back

Displays maximum and minimum value hold, the difference between high and low values, alerts when user-defined tolerances are exceeded, and can be set to zero at any spindle position for measuring in either or both directions

Electronic indicator measures 0 to 0.5" (0 to 12.7mm) with 0.0001" (0.001mm) resolution and + or - 0.00012" accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications

LCD displays in both inches and metric units, and indicator has a lug back for mounting from the rear of the indicator

Absolute electrostatic capacitance-type linear encoder for accurate measurements

As compact as standard series 2 dial indicators, large, easy-to-read LCD

Go/+/-ng judgment can be performed by setting upper and lower tolerance limits; The judgment result (go/+/-ng) can be displayed in full-size characters

The positive/negative count resulting from the spindle’s up/down movement can be toggled, internal calculations using the simple formula of [f(x) = ax)] are available

Electronic indicator measures 0 to 0.5" (0 to 12.7mm) with 0.0005" (0.01mm) resolution and + or - 0.0008" accuracy, for measuring short, linear distances in mechanical engineering, machining, and manufacturing applications

LCD displays in both inches and metric units, and indicator has a lug back for mounting from the rear of the indicator

Absolute electrostatic capacitance-type linear encoder for accurate measurements

Package Dimensions: 34.798 cms (L) x 15.748 cms (W) x 7.62 cms (H)

Product Type: Precision Measuring

Package Quantity: 1