Best 8Milelake Engine Tools in 2026

Disconnects Fuel Line and EVAP Line Fittings with Tabs that Must be Depressed to Disengage.

Low-profile design with 85° bend allows the tool to fit between the top of the fuel tank and vehicle.

Works great on Delphi two tab connectors and some import vehicles.

The Ram-Pro Engine Spark Tester Probe is a must have diagnostic tool for any engine with a spark plug, & can quickly and easily diagnose ignition/engine outboard motor issues or a fault in the fuel delivery system

HOW TO USE: Simply connect the tester between the spark plug and the plug wire, if spark is being sent, the tester will mirror the spark and light up - Find dirty spark plugs, defective points, bad cables or connections, etc.

DIMENSIONS: 6" boot/cable, 5" shaft/light housing; 2.2 oz. DESIGN: Nickel Plated Shaft, Double ended flexible tool offers a straight boot -– Internal bulb lasts for years, but is replaceable through transparent housing

EFFICIENT VALVE REMOVAL/INSTALL - Everything you need to safely remove or install valve springs, including the wide C-clamp, extension screws, and pushers with 5 collet sizes for a precise fit on almost any automotive or small engine valve spring and cylinder head.

DURABLE STEEL CONSTRUCTION - With forged steel construction for superior strength and hardness, this C-Clamp will not bend or twist under the stress of compressing valve springs. The smooth surface is finished with oxide to resist rust and corrosion.

SIMPLE OPERATION - Close the valve spring compressor until touching the center rod, and insert the compressor into the coil spring. Carefully compress the spring for removal or install and only release compression when the spring is set for install. Handle with caution.

Yuesstloo camshaft holding tool kit can help vehicle maintenance effectively and is easy to use, simplify your timing chain work. You can use it to accurately position and alignment for Ford 3.5L and 3.7L camshafts at the TDC to perform repairs during removal and installation of the timing chain.

Designed specifically for Ford V6 3.5L & 3.7L Cyclone Engines. Compatible with Ford Edge Explorer F-150 Flex Fusion Fusion Hybrid Mustang Taurus Lincoln MKS MKT MKX MKZ Navigator Mercury Milan Sable Taurus Taurus X. Replace 303-1248 303-1530 OTC 6682

Comes with a portable case, includes 2 X Camshaft Holding Tools, 1 X Tension Tool, 1 X Tool of Removing Camshaft Screw and a pair of gloves. Convenient to carry and store.

Includes 3 Micrometers with measuring ranges: 0 - 1", 1 - 2", 2 - 3", Vernier Graduations: 0.0001", accurate to 0.0001". Mitutoyo-style frame - solid casting frame.

Lock nut

Crisp, clear, easy-to-read graduation. Hardened and ground spindle with carbide anvil ensure durability and accuracy. Super hard carbide tipped. Ratchet handle for precise application of force.

SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate; Our turner helps you apply proper torque to nuts during flywheel installation

COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently; This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft

FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key; Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs

Valve Spring Compressor C Clamp Tool Set Service Kit includes 5 adaptors to correctly fit, install, and remove automotive valve springs,Suitable for your motorcycle, ATV, UTV, car, and other small engine vehicles and equipment; All collets are 1.75 inches (4.4cm) long with 9.5-inch (24.1cm) maximum jaw openings

Valve Spring Compressor Small Engine, This toolset is used to easily and safely compress valve springs for removal or installation.The forged steel construction of this set provides superior strength and hardness. The C-Clamp will not bend or twist under the stress of compressing valve springs. The oxide finish on the set components resists rust and corrosion. The surface finish of each part is smooth and provides for easy use under high compression.

Valve Spring Compressor Tools -come packaged in a high-impact case that holds each part securely. The parts will remain organized and safe while stored or in transport, and the case stacks and stores away conveniently.1 x Spring Compressor ""C"" Clamp ,5 x Adaptors ,3 x Extension Screws ,1 x Compression Bar ,1 x Storage Case

UNIVERSAL DESIGN: Fits more than 90% of common applications including dominator manifolds

VEHICLE MAINTENANCE: Makes removing or installing engines with or without the transmission easy

SIMPLE ATTACHMENT: 3 large holes on plate allow easy attaching for chains or hooks

💥【A MUST TOOL FOR BEGINNER】- VDIAGTOOL VD10 car code reader is an incredibly useful obd scanner for each car owner or hobbyist, even for those with little to no experience when it comes to vehicle mechanics! Using this car diagnostic scanner is extremely easy. All you have to do is attach it to your car OBDII port and you can diagnose car problems in seconds! ✅ Read Codes (DTCs); ✅ Clear Codes; ✅ Live Data; ✅ View Freeze Frame; ✅ I/M Readiness; ✅ Vehicle Information.

🚗【KEEP ENGINE IN GOOD STATUS】- VDIAGTOOL check engine code reader brings a fast access to scan, read the car fault code, show its definition on the screen instantly, troubleshooting to find the root causes of problems, erase the engine fault code and turn off the MIL (Malfunction Indicator Light).

🚗【READ/CLEAR CODES & DTC LOOKUP】- No search online & saving your time, this vehicle code reader retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, pending codes and displays DTC definitions based on the built-in database(more than 3000 codes) on the TFT screen, find out the root causes and clear the codes after fixed.

Comes with a portable case, easy to carry and store the tools. Boxes contained crankshaft locking pin, camshaft setting plate, camshaft sensor setting tool x 2, camshaft sprocket holding tool, chain tensioner locking pin x 2, and with a pair of gloves.

Made of high-quality steel, durable, strong and stable, rustproof, not easy to deform. Designed to lock the cams and crankshafts in order to allow disassembly and replacement of timing chains adapted at the Vauxhall Opel Chevy engine. Make sure the chain tensioner is completely retracted and held in the retracted position using the suitable pin.

Yuesstloo Turbo Engine Timing Tool Kit is compatible with Vauxhall Opel, Adam 1.2 1.4 (2012- ), Ampera 1.4 (2011- ), Astra-J 1.4 (2009), Aveo1.2 1.4 (2011-), Corsa-D 1.0 1.2 1.4 (2009-), Cruze 1.4 (2011-), Cascada 1.4 (2013-), Insignia 1.4 (2011-), Meriva-B 1.4 (2010-), Mokka 1.4 (2012-), Orlando 1.4 (2012-), Zafira-C Tourer 1.4 (2011-)

【Complete Kit for Car Testing】: the 9pcs cylinder testing kit comes with 8 x compression tool and 1 x spark plug tester, total package includes 1 x SPARK PLUG TESTER, 1 x 300PSI DUAL UNITS GAUGE, 1 x STRAIGHT RUBBER CONE ADAPTER, 1 x CURVED RUBBER CONE ADAPTER, 4 x BRASS ADAPTERS, and 1 x 14-inch EXTENSION HOSE, complete package allows you to test the car’s condition easily by yourself

【Extra Value with Spark Plug Tester】: the spark tester is a must have diagnostic tool for engine which has a spark plug, you can diagnose ignition or engine outboard motor issues and a fault in the fuel delivery system quickly and easily; If spark is being sent, the tester will mirror the spark and you can see it light up, therefor you can find dirty spark plugs, defective points, bad cables or connections, etc.

【300psi Dual Units Gauge with 3” Dial】: easy to read this compression gauge which comes with 0 - 300 PSI and 0 - 20 kg/ cm square dual units, the gauge cover is protected by an anti-scratch coating and rubber protection to absorb shocks; Plus, all the items are contained in an ABS case for easy storage, the fittings can accommodate most or all of your needs for most engines, good kit overall for your garage

Sturty & Durable: Made of high-quality materials, and treated with rust and corrosion protection, sturty and durable enough. Large acrylic dial with rubber cover is convenient to read datas more accurately. Pressure range: 0-300 psi, 0-20kg/cm².

Professional Tester Kit: Our cylinder compression tester kit is a professional tool to measure pressure on gasoline engine cylinder quickly and accurately. It is suitable for petrol engines on motorcycles, cars, trucks, ATVs, and any other vehicles.

Easy to Carry: The handheld carrying case is made of high quality PVC, keeps all accessories in place and protects the gauges during storage and transportion.

【Package Includes】Tanstic 12pcs valve spring compressor set contains everything you need to remove and compress valve springs: 1pc solid valve spring compressor including 1pc wide C-clamp, 3pcs extension screws, and 5pcs pusher adapters in 5 sizes and 1pc hand level, 2pcs valve lappers. Practical set for easier work.

【Valve Spring Compressor】Each component is made from forged steel which guarantees superior strength and hardness, so that our C-Clamp will not bend or twist under the stress of compressing valve springs. Compressor surface is oxide finished for rust- and corrosion-resistance. Quality material for longer service life.

【Practical Size】Multiple adapters and pusher can meet your different auto mechanical needs. Valves for the Following Sizes: 16mm (OD.) 19mm (OD.), 25mm (OD, 30mm (OD.). Also with hard plastic storage case for easy carry, safe storage, and quick organization.

Application: Compatible with Ford Rotunda Expedition Explorer F-150 F-250/350/450/550 Mark LT Mountaineer 5.4L 4.6L 6.8L 3V Engine. Replaces 303-448, 303-1046, 303-1175, T93P-6303-A, 6681, 6024, 525219.

The timing chain locking tool makes camshaft or cam phaser change easily on your vehicle without losing chain tension and removing the timing cover. And the crankshaft positioning tool is used to align and hold the crankshaft at the correct position for timing chain installation.

Convenient to transport and store: Yuesstloo Engine Repair Tools Kit comes with a carrying case, all parts are neatly placed in the case. The kit includes 1 x valve spring compressor tool, 1 x crankshaft positioning tool, 1 x timing chain locking wedge tool, 1 x cam phaser locking tool, 1 x crankshaft pulley bolt, 2 x cam phaser lock out kit, and a pair of gloves.

Includes extensive holder and fitted case.

Chrome plated handle. Insulated grip.

Self-centering. Easily adjustable.

✅【Elite Edition】- Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.

✅【Wide Capability】- Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 10 languages - English,German, Dutch, Spanish, French, Italian, Russia, Chinese, Japanese and Korean. Designed with a clear display LCD screen (128 x 64 pixels). No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.

✅【Premium OBD2 Code Reader with Enhanced Coverage and Functionality】- The Scanner empowers home mechanics, automotive enthusiasts, and service & repair technicians with professional-level functionality. It is a vehicle code reader that reads and clears OBD engine codes and displays all vehicle information from when a trouble code was triggered.

【Spot on Accurate】This digital compression gauge provides accurate measurements with an impressive 0.5 display resolution, which is within 1% of the exact pressure range of 10-200 PSI. You can rely on consistent and precise readings with no need for guesswork, unlike analog gauges that rely on pointer comparison.

【Versatility】Our product offers versatility with compatibility for 3 different thread sizes, including 2 sizes on the hose and an additional adapter. It's the ideal tool for all types of gasoline engines, including automotive, small engines such as lawn equipment, chainsaws, and four-wheelers, outboard boat motors, motorcycles, dirt bikes, and ATVs.

【Simple and Straightforward】13-inch hose ensure effortlessly reaches deepest spark plugs, quick connect coupler for added convenience, and the side bleeder valve allows for multiple tests without disconnecting the hose. Additionally, the backlit LCD screen displays large, clear numbers in 4 units, making it effortless to read even in dimly lit environments.

FITS: 01-03 Jeep / Grand Cherokee, Wrangler, Cherokee 4.0L L6 OHV Naturally Aspirated

FITMENT NOTES: w/ Oil Pump & Timing Belt Or Timing Kit If Applicable, Master Kit

You are assured to receive a worldwide proven Master Engine Rebuild Kit quality part with OE quality fit and performance.

GIFTS FOR MEN - This is the perfect Father's Day gift for the car enthusiast dad. This is a wonderful father's day gift ideas to give to a dad, husband, friend, or DIYer who has everything and wants nothing.

QUICK AND EASY DIAGNOSTICS - Our Bluetooth OBD2 scanner connects to your smartphone in seconds, allowing you to easily read and clear error codes, view live data, and perform advanced diagnostics.

RELIABLE AND ACCURATE RESULTS - Our car scanner utilizes the latest OBD2 technology to provide accurate and reliable diagnostic information, ensuring that you can trust the results you receive.

HASSLE FREE VALVE SERVICE: Orion Motor Tech's valve keeper remover and installer tool kit helps you replace valve springs and valve keepers quickly and easily without removing the engine head

WIDE COMPATIBILITY: This valve spring compressor set fits valve retainers 0.2" to 0.3" and 0.3" to 0.4" (4.5 to 7.5 and 7.9 to 9.5 mm) wide on a variety of gas and diesel overhead engines

SECURE CONTROL: The valve keeper removal tools' built in magnets hold parts securely during operation, maximizing efficiency and precision and reducing engine damage

Exquisite design: dual display pressure gauge head, clear scale, easy to clean, and equipped with rubber buffer protection cover, shockproof and scratchproof.

Complete accessories: select high-quality metal materials, 10 adapters to fit most brands and models, suitable for most gasoline and small diesel engine cars, motorcycles, boats and other vehicles, as long as the adapter can match your engine and The oil pressure does not exceed 140PSI, each marked with a number, stored in a fixed position in the red case for easy selection.

Oil-resistant hose: Oil-resistant and high-temperature resistant hose, freely bendable, sturdy and durable, giving you professional high-quality products.

Pre-Lube Engine Oiler Tool

EASY CAM ALIGNMENT: Orion Motor Tech's 303-1655 camshaft alignment tool kit securely locks your camshaft to the top dead center of the piston travel for accurate alignment so that you can service your camshaft with ease

PRECISE CONTROL: The camshaft holding tools firmly fix the parts in place and the phaser bolt removal socket quickly removes the damaged phaser bolt, facilitating your timing chain and belt replacement, phaser bolt change, water pump maintenance, and more

WIDE COMPATIBILITY: Our OEM-equivalent engine timing tool is compatible with 2017-2022 Ford F-150 and Ford GT, and 2018-2022 Ford Expedition and Lincoln Navigator

🔨【𝐆𝐥𝐨𝐰 𝐏𝐥𝐮𝐠 𝐄𝐱𝐭𝐫𝐚𝐜𝐭𝐢𝐨𝐧 𝐊𝐢𝐭 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧】Angchun glow plug kits is designed for disassembling damaged/broken 8mm 10mm glow plugs from cylinder heads. Glow Plug disassemble tool kit is designed for disassembling broken or damaged glow plugs without causing further damage

🔨【𝐖𝐡𝐚𝐭 𝐮 𝐆𝐞𝐭 - 𝟐𝟐𝐩𝐜𝐬 𝐆𝐥𝐨𝐰 𝐏𝐥𝐮𝐠 𝐑𝐞𝐦𝐨𝐯𝐞𝐫 𝐒𝐞𝐭】Drill/tap guides (M8x1.0, M10x1.0, M10x1.25, M8 x 1.0 - M10 x 1.0 - M10 x 1.25, M3 x 0.5) x7, glow plug extraction adapters x5, drill bit (2.5 x 120 mm - 3.3 x 140 mm) x2, taps(100 mm, M4 x 0.7 tap 100 mm) x2, threaded pulling rods x3, threaded pulling rod ends x3 and blow moulded case x1

🔨【𝐖𝐢𝐝𝐞𝐥𝐲 𝐅𝐢𝐭𝐦𝐞𝐧𝐭】Glow plug electrodes removal extracting plugs tool is suitable for domestic and imported vehicles. Compatible for most domestic and imported vehicles, such as compatible for Ford, for Toyota, for BMW, for GM, for VW, for Mercedes Benz, for Alfa romeo, for Fiat, for Vauxhall, for Opel, for Peugeot, for Renault, for Rover and any car that fits the using size etc

1. scan and clear the engine fault code, and display their meaning (the database has more than 3000 general code definitions），find out the problem and solve it. Save money and time.

2.Universal.Applicable to most cars based in the United States in 1996, EU and Asia in 2000, and newer OBD II and CAN household or imported cars. Supports 6 languages -English ，French ，Italian, Russian, German, Spanish，Dutch。

3.Color Screen — 2.8'' HD color check engine code reader displays more and richer content, which will not cause eye fatigue after long-term use. And the body design is very suitable for one-handed holding.

THIS IS BRAND NEW: DNJ® Piston Set Standard Size

FITS: 85-95 Toyota / 4Runner, Pickup, Celica 2.4L L4 SOHC Naturally Aspirated 22RE,22R,22REC

FITMENT NOTES: Set Services Complete Engine, 1.5x1.5x4.0

THIS IS BRAND NEW: DNJ® Cylinder Head Set

FITS: 03-06 Chrysler, Dodge, Jeep 5.7L V8 OHV Naturally Aspirated

FITMENT NOTES: Premium Sealing Solution, Valve Grind Set

Yuesstloo Engine Camshaft Timing Locking Tool Kit is used to check and lock the camshaft of petrol injection engines. Help you align camshafts, set crank sensor and balancer, adjust crankshaft in the correct TDC position. Simplify engine work and complete work correctly and efficiently.

The timing tool compatible with Jaguar Land Rover Evoque Ford Mondeo 2.0T Engine. Works for 2.0L Duratec-HE (MI4) Petrol, 2.0L EcoBoost GTDI (MI4) Petrol, 2.0L ST EcoBoost GTDI - (MI4) Petrol, Focus (2011.2), Galaxy (2006.5), Mondeo (2007.5).

Replace OEM Equivalent Part Number: 303-1600; 303-748; 303-1594; 303-1595; 303-1521; 303-1504. Works on the engine code: TNWA, TNWB, TPWA, TNBA, MGDA, XQDA.