Best Tritrust Exhaust Pipes in 2026

Please double check your exhaust size prior to placing your order to avoid restocking and inbound/outbound shipping fees

Y-Pipe - 2" Single, 2" Dual. Check product details below for other sizes.

Pipe have a gentler radius that allows for efficient exhaust gas scavenging, noise Cancellation and better balance between cylinder banks

【Dimension】Inlet Diameter:4"; Outlet Diameter: 6"; Overall Length: 15".

【Design】Bolt On - Rolled Edge - 45 Degree Single Angle Cut.

【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

Outside Diameter 2.00 inch /50.8mm - Wall Thickness 0.06 inch /1.5mm

Universal, Stainless Steel, Nonmagnetic

90-Degree & 180-Degree Mandrel Bends

Dimension: standard 4" x 6" x 15"(inlet, outlet and overall length); ONLY universal fit for vehicles with 4-inch outside diameter exhaust pipes (Please make sure the Outside Diameter of your vehicle tailpipe outlet is 4.0" before purchase)

Anti-deformation & rustproof: built from high-grade stainless steel, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well; plus, a drainage hole helps drain water to prevent rust

Stylish & pleasant-sounding: sleek degree rolled-edge angle cut and thicker inner wall design, make your car sounds rumble and crackle for a more powerful and unique sound; meanwhile, the black powder coated finish offers your car with an elegant & mysterious appeal

SIZE: 2.5" (2 1/2") ID,2.625"(2 5/8") OD, 8 inch outer length(total length including extension), 1 Piece of 100% Brand New Double Braided Flex Pipe.

MATERIAL: Made by Stainless Steel, Double Braided construction, durable and corrosion resisting.

FUNCTION: Vibration and nose reduction, Convenient installation and extended exhaust noise elimination system life.

【Dimension】2.5 inch inlet diameter;3.5 inch outlet diameter;Overall Length:9.5 inch. Please check all the dimensions before purchasing in case of installation interference.

【Design】Weld On - Double Wall Slant Angle Cut

【Material】High Quality Mirror Polished T304 Stainless steel. Durable and Anti-corrosive,never Rusty.

★FITMENT: Inside diameter inlet---4 Inch, Outside diameter outlet---8 Inch, Overall length---15 Inch

★MATERIAL: High qualified stainless steel material,durable and anti-corrosive. It will protect your original pipe from the sun and rain, avoid rusting and deformation.

★NOTE : It will fit 4inch outside diameter pipe, but will not fit 4 inch inside diameter pipe.

ID: 2.5" OD: 4" Length: 18" Angled Chrome

Weld On installation and Angled Cut design

Materials: Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty. Please clean the exhaust tip regularly to expand its longevity.

【Dimension】2.5 inch inlet diameter;4 inch outlet diameter;5 inch Overall Length

【Design】Weld On - Double Wall - Slant Angle Cut.

【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

4" Inlet & 8 Outlet Universal Diesel Truck Exhaust Tip.

Surface Finished: Polished. Style: Angled Cut - Rolled Edge

Have a small hole on bottom of tip to drain water.

【Dimension】2.25 inch inlet diameter; 3.5 inch outlet diameter; 18 inch overall length.

【Design】Weld On - Single Wall - 45 Degree Angle Cut.

【Material】High quality T304 Mirror Polished Stainless steel.Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

【Dimension】5 inch Inlet; 7 inch Outlet ; 15 inch Overall Length.

【Design】 Bolt On - Rolled Edge - 70 Degree Angle Cut.

【Material】High quality stainless steel mirror polished. Durable and Anti-corrosive,protect the original tips from Sun and Rain,avoid rusting and deformation.

【Dimension】2.5 inch inlet diameter;3.5 inch outlet diameter;Overall Length:9.5 inch Exhaust Tip.

【Design】Weld On - Double Wall Slant Angle Cut- Duo Outlets-Blue Burnt Tips.

【Material】The 2.5'' inlet dual exhaust tip is made of vacuum plating blue high quality Mirror Polished T304 Stainless steel. Durable and Anti-corrosive, never Rusty.

【Dimension】ID: 4" OD: 8" Length: 15" Angled Roll Bolt On Exhaust Tip

【Design】Bolt On installation and Angled Cut-Rolled Edge design

【Material】Made of High quality 304 Stainless steel has very strong anti-corrosive, Never Rusty

√ Inlet: 2.5" (63mm), Outlet: 3.5" (89mm), Total length: 9.5" (241mm), Width: 7" (178mm)

√ Features: Staggered, Duo Outlets, Blue Tips, Duo Layer, Slant Cut,Staggered

√ Universal fit for Most Vehicles With 2.5" Diameter Inlet Size Only (Note: Please Refer Dimension To Make Sure It Will Fit Before Purchasing)

U bend with 6" legs

Pipe gauge measures 18", tube diameter measures 2" and radius measures 3"

Package Dimensions: 16.8 " L x 15.9 " W x 5.4 " H

16-PIECE KIT: We provide four 46-inch lengths of straight pipe for the main pipe to run along with four lengths of each bend type: 90-degree, 45-degree, and 180-degree u-bends. 16-gauge mild steel tubing with .065-inch wall thickness for easier welding.

CUSTOM SYSTEM: Bends allow you to fabricate the optimum dual system routing around cross-members and over your rear axle simply by measuring, cutting, and welding the bend sections as required. Mandrel bent tubing maintains inside diameter throughout pipe flow path.

SLIP-FIT INSTALLATION: Each smooth mandrel bent tube is expanded on one end to allow easy slip-fit installation.

Made from 100% polished stainless steel

Reduces back pressure for added horsepower and torque

Adds a deep, resonant sound

Fits: To ensure proper fit make sure your exhaust INLET diameter is 2.5 Inch. Please check all the dimensions before purchasing in case of installation interference.

Pack of 2 blue exhaust tips; Professional installation is highly recommended; No instruction included

Weld On installation and Single Layer-Slant Cut design

ID: 5" OD: 10" Length: 18" Angled Roll Bolt

Bolt On installation and Angled Cut-Rolled Edge design

Materials: Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty.

【Material】Universal Straight DIY Custom Mandrel Exhaust Tube Pipe Made of High-Quality T-304 Stainless Steel, Strength and longer life, Excellent resistance to corrosion and oxidation resistance.

【Size】Outside Diameter: 3 Inch / 3'', Straight Pipes Length: 30"Inch, Bending Angle: Straight.

【Easy To Use】Construction to maintain OD/ID size integrity for easier installation, Polished pipe is great for DIY project.

Single Inside Diameter: 3 1/32" (3.03125"), Single Outside Diameter: 3 3/16" (3.1875"), Dual Inside Diameter: 2 17/32" (2.53125"), Dual Outside Diameter: 2 11/16" (2.6875")

Center to Center of Dual Pipes: 4" ;Overall Length: Approx. 10", Overall Width: 7 3/8" (7.375"), Thickness: 2 3/4" (2.75")

Between Dual Pipes: 1 5/16" (1.3125"), Outside to Outside of Dual Pipes: 6 11/16" (6.6875")

INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance

FLEXIBLE SOLUTION -- Offered in a variety of lengths, finishes, diameters and gauges with the appropriate Outlet Diameter (O.D.) connection; may require fabrication and welding; see product specifications for more information

BETTER TOGETHER -- Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Stainless steel with high resistance to rust.

4" Inlet 8" Outlet 18" Long

Fits 4" OD Exhaust systems

Polished Stainless Steel finish for a personalized touch

Fit type: Vehicle Specific

Package Weight: 1.157 kilograms

【Dimension】2.25 inch inlet diameter;3 inch outlet diameter;Overall Length:9.5 inch. Pls make sure the tip inlet size is matched the outlet size of your pipe on your car before your purchasing.

【Design】Weld On installation and Angled Cut - Rolled Edge-Staggered

【Material】High Quality Mirror Polished T304 Stainless steel. Durable and Anti-corrosive,never Rusty.

5 inch inside diameter inlet, 8 inch outside diameter outlet, 15 inch overall length.

Black Powder Coated surface treatment, high temperature resistance, not easy to scratch & fall off.

Made of High quality Stainless steel with strong anti-corrosive, Never Rusty.

Rounds pipes in or out

Come in box

Range is 1 1/2" - 3 5/8" (38.1 - 92mm)

Brand NEW Black Powder Angle Rolled Exhaust Tips (7, 9, 12, and 18 inch lengths)

All exhaust tips are 2 1/2" inlet x 4" outlet -- fits over your existing 2 1/2" tailpipe

Our single wall, rolled tips can be easily welded on for a perfect fit. With a 2.5” inlet and 4” outlet, these tips will fit over your existing 2.5” tailpipe and are available in 7", 9", 12” or 18” lengths.

Package Dimensions: 13 L x 5 H x 5 W (inches)

Package Weight : 3 pounds

Country of Origin : United States