Best Westbrass Faucet Flanges in 2025

City Water Flange. Lead free brass check valve with 1/2” MPT

Direct OEM replacement

UV and impact resistant

GARBAGE DISPOSAL FLANGE: This Sink Flange is designed to support your InSinkErator manufactured disposer. Available in a variety of popular designer finishes to complement many kitchen sink designs.

HIGHEST STANDARDS: Genuine InSinkErator parts & accessories add a touch of elegance & convenience. We offer an entire range of garbage disposal accessories held to our highest standards.

AMERICA'S #1 DISPOSER BRAND: There are more American-built InSinkErator garbage disposals in US homes than all other brands combined. A full line of models means there's one right for every need and budget.

Sensible styling that complements any home

Classically styled faucets and accessories handle the toughest of tasks with ease

For bar/prep sink applications

Sure Grip Low Pattern Flange for Copper pipe

For mounting to 1/2 in. Copper pipe (5/8 in. OD)

2-1/2 in. OD Exterior diameter

Size - The Shower Flange is suitable for pipes of any material less than 21mm in diameter. Please measure your pipe to make sure that it matches the measurements on this product.

Material - The hinged floor and ceiling plate flange cover is made of 304 stainless steel, which has great heat resistance and corrosion resistance, that can be applied for long time use. Chrome Finish.

Easy Installation - The hinged floor and ceiling plate flange cover can be easily installed without experience a hassle-free installation with no expert plumbing skills or tools.

New Waxless Toilet Flange and Spacer System for any NEW installation or REPAIR on 4" ID pipes.( Pipe must have a clear 4" ID")

Optional use of Spacers- adjust the height of the flange if needed- from min.3/8" to max. 1 1/8" height difference.

Inward lip forms a seal directly to the toilet horn, NO WAX NEEDED. Flexible Sleeve seals to the inside of the pipe. See Diagram A.

Corrects an improper flange height from 1/4 in. - 1 in. during repair and remodels

Easily extend the flange surface above the floor for optimum sealing with a standard wax ring

Use on existing PVC, ABS, cast iron, and stainless steel ringed flanges

Spacer builds up existing toilet flange on below-grade flooring

1/4 in. thick

Up to 3 can be stacked together

Purpose - floor and ceiling plates also known as escutcheon plates are used to cover and close the gap between the outside diameter or the pipe and the inside diameter of the wall, floor, or ceiling opening to avoid damage and leakage.

Measurements - Hole diameter is 0.625 inch (15.88mm) and outside diameter is 2.83 inches (72mm) Please measure your pipe accordingly and make sure that it matches the measurements on this description.

Fittings - Fits 3/8 inch IPS (3/8" Outside Diameter) Galvanized Pipe or 1/2 inch (1/2" Outside Diameter) Copper Pipe. Perfect for bathroom and kitchen tubular pipes.

FLANGE COVER: Cover conveniently replaces existing flanges without removing them

CLIP-ON DESIGN: 2 part design clips over shallow or deep flange and hides the old piping behind it, eliminating the need to cut the old flange off or remove the valve

EASY INSTALLATION: Simple to use design allows for easy installation and removal or replacement

UNIVERSAL - Universal, adjustable design fits stems of various sizes

FULL COVERAGE - Covers the working mechanism of a faucet

DURABLE BRASS - Durable brass construction provides reliability

Durable plastic construction

Use to install new tub/shower handle flanges

41/64-18 x 2-13/16 in.

Stainless Steel

Easily fits and this is easy to install

Made in China

🚽【Easy to install】The toilet flange use with durable plastic construction, no need for the removal of existing flooring. The toilet flange repair kit is easy to install and can be used with the wax ring.

🚽【Perfect seal】The toilet flange made of high quality ABS material, resistant to corrosion and high temperature, sealing to prevent leaks. The gasket and sleeve are made of friendly TPE material. Our toilet flange repair kit allows you to live in comfort and peace of mind.

🚽【Suitable for pipes】Toilet flange repair kit fitting 4" and 5" pipes.

Toilet wax gasket with flange 6 pack

Universal fit with all 3” and 4” waste lines

Standard wax ring

1.New design: The toilet flange replacement kit has a new designed sleeve, suitable for 4-inch drain pipe, perfect fit with the inner wall of underground pipe, strong sealing, the lower mouth narrow design, can effectively prevent the crawler in the sewer pipe through the pipe to climb into the bottom of the toilet, at the same time, the size of the mouth is 3 inches, can be used for 3-inch sewer pipe.

2.Perfect close seal with the floor: Add a green gasket between the fixed plate and the floor, which plays a perfect sealing role and perfectly prevents the smell from the underground pipeline from emanating from the floor.

3.High quality: Made of high quality raw materials, durable. The white fixing plate is made of high quality ABS material, and the green gasket and sleeve are made of high quality and environmental friendly TPE material. They are more resistant to high temperature and low temperature and have better elasticity, which ensures the durability of the whole set and is not easy to damage.

1.304 Stainless steel material,anti-rust.

2.Split installation,the gap connection is tight.

3.Paste installation,waterproof adhesive,not easy to fall off.

Genuine American Standard repair part

FLANGE & WASHER F/EZ METAL DRAIN

Check your repair part information for compatability

The keyhole flange cover is made of stainless steel, which is heat-resistant and resistant to a variety of chemicals.

When the pipe passes through the wall, it will leave an ugly surface; Conical pipe cover can be decorated with pipe cover or cover the gap to keep the appearance clean.

The size of flange cover is about 17 x 32 x 56 mm / 0.66 x 1.25x 2.2 inches, which is suitable for 1 / 2 inch CTS nominal copper pipe (5 / 8 inch outer diameter); The size of the middle hole is 16mm.

Function: Made from durable, lightweight material, this #32 Aligner removes the difficulty of flange aligning and squaring; This tool is snugly notched at either end for ease in aligning on the centerline of the pipe

Features: This aligner comprises of two 25-pound pull, cast-in magnets for holder in either a flat horizontal or vertical position; The base will accept either leg of a standard or combination square

Measure: This self-determining flange aligning tool will work on pipe diameters from 1" onwards; Requiring only the extension on the legs of the square being used to accommodate larger diameters

Mixet 5-1/2" OD shallow escutcheon for deep rough-ins are perfect for contractors, maintenance-repair professionals, and do-it-yourself home owners

For single handle tub and shower applications with original, non-pressure balance Mixet valves

Mixet's chrome escutcheon is a perfect way to update your dated or worn out tub or shower

Matches OE form, fit and function

Premium materials to withstand extreme temperatures

Includes seals where applicable

MAIN FEATURE. Use to protect your shower stem and add more style to your bathroom or kitchen.

DURABLE. Made with rust proof high quality material, designed to withstand hot and cold temperatures. Guaranteed to last longer than your usual shower flange

EASY INSTALLATION. Designed to fit any standard P-P shower or bathtub cartridge making perfect for repair and rebuilding. Also guaranteed to make the installation or repair process easy with all the parts included.

For kitchen sink applications

4-1/2 inch diameter brass flange

Top-mount flange provides easy installation

Adjustable PVC drain cleanout

Fits a 3 in. or 4 in. pipe

Includes 6 in. brass cover

High quality brass construction for durability and reliability

Can be used to cover unsightly holes

Will accommodate a 1/2" pipe

Handle flange for select Pfizer widespread and roman tub models

Pfizer Forever Warranty covers finish & function for life

Genuine Pfizer Part

Save Time/Space and Labor

Patented Technology with Further Patents Pending

The 360 Degree Flange Rotation Allow Rotation to any Degree Necessary for Installation

Keyhole flange covers are made of stainless steel and are heat resistant and resistant to many chemicals.

When pipes run through walls, they leave an unsightly finish; tapered pipe caps can be trimmed with pipe caps or to cover gaps to keep the look clean.

Flange cover measures approximately 21.5 x 70 x 25 mm / 13/16x 2-3/4x 1" and fits 1/2" CTS nominal copper pipe (5/8" OD); center hole size is 16mm.

Sold in pairs

Ideal for working on pipe lines and other applications involving flanges

Makes gasket removal fast and easy