Best Aluminum Fireplace Fans in 2026

Magnetic Thermostat Switch for Fireplace Stove Blower Fan / Kit use, no screws and nuts needed

Temperature switch closes (turn on) at approximately 120°F and opens (shut off) at approximately 90°F (+/- 5°F tolerance)

Measures 2 1/2-inches in length by 1-3/4-inches in width.

👉 Hongso Replacement Fireplace Blower Fan KIT for Heat N Glow GFK-160A; Regency Wood Stove Insert 846515; Royal GFK-160; Jakel; Rotom # R7-RB168 (2016 model)

👉 Dual Blower Fans with Center Mounted Ball Bearings Motor; Right-angled Stand, the direction of the wind can be adjusted with 90 degrees; 3-prong Power Cord, universal connecting wires, rheostat & thermostat, installation instructions. 👉It is not pre wired, easy to install with the installation instructions and wiring diagram

👉 Universal fit blower kit; High Quality, Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting

Includes replacement fireplace blower only. No power cord or instructions. Total Length = 7.5" Width = 3.73" Height = 3.23" Flange Opening = 4 7/8", Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3050, Airflow in C.F.M: 98, 120V, 0.5 Amps, 60Hz, Power Consumption (watts): 31W Rheostat Variable Speed: NO; Magnetic Thermostat: NO; Material: Aluminum + Galvanized Steel; Certifications: Motor UL Approved

Can be used as a universal replacement blower. Cross Reference Numbers: Blower unit only, GFK21, FK21, GFK21B, R7-RB66, HB-RB21K, HB-RB130, R7-RB21, BLOTBLDV, BLOTSDV, Novus 30, Security UZY3. Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. The "Fits" BRAND and MODEL # are Reference ONLY! Any questions or concerns, please contact us before ordering.

▶︎Fits Majestic: 300DVB, 300DVBH, 300DVBL, 300DVBLNSC7, 300DVBLPSC7, 32VFSC, 32VFSNVC, 32VFSPVC, 33BDVR, 33BDVREN, 33BDVREP, 33BDVRRN, 33BDVRRP, 33BDVT, 33BDVTEN, 33BDVTEP, 33BDVTRN, 33BDVTRP, 33ISDG, 33LDV, 33LDVR, 33LDVREN, 33LDVREP, 33LDVRRN, 33LDVRRP, 33LDVT, 33LDVTEP, 33LDVTIN, 33LDVTIP, 33LDVTRN, 33LDVTRP, 33XDV, 33XDVR, 33XDVREN, 33XDVREP, 33XDVRRN, 33XDVRRP, 360DVS2, 360DVS2RN...

Includes blower fan unit, 3-prong power cord, connecting wire, rheostat & thermostat, Velcro mounting strips & installation instructions. Wall switch for blower NOT REQUIRED

Blower total Length = 7.5" Width = 3.73" Height = 3.23" Flange Opening = 4 7/8", Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3050, Airflow in C.F.M: 98, 120V, 0.5 Amps, 60Hz, Power Consumption (watts): 31W; Material: Aluminum + Galvanized Steel; Certifications: Motor UL Approved

Cross Reference Numbers: FK21, GFK21, GFK21B, R7-RB21K (Electric Motor Warehouse), HB-RB21, HB-RB21K, HB-RB130, Novus 30, Security UZY3, GA3450TA; NOTE: The "Fits" BRAND and MODEL # Listed below are Reference ONLY! Make sure you measure the size of your original blowers and compare with the replacements BEFORE you order

Total Blower Length with guard: 9.5 in. Height: 5.25 in. Depth 3.75 in. Blower size is 9" long and 5 1/4" tall. There are 4 holes to mount. They are 8" apart left to right, and 4 3/4" apart top to bottom. This optional variable speed blower can be mounted to the back of the stove using predrilled holes to improve heat circulation. Manual variable speed switch. 110V to 120V with 6' cord. 2800 RPMS. This blower set includes: 4 Mounting Hardware Screws and 1 Heat Gasket.

Make your wood burning stove even more efficient with this blower. When you add a blower to your wood burning steel stove, heated air from the stove will be circulated better throughout your room. This blower will allow you to heat a bigger space while using less fuel, which will save you money. And a more efficient wood burning stove means that you will spend less time going outside in the cold for more firewood.

Fits in GHP Group, Monessen/Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplace

Electric Fireplace Blower / Squirrel Fan & Heating Element / Far Infrared Heater.

Fits Twin Star brand electric fireplace and other Wood / Gas Burning Stove or Fireplace.

Total Length = 9 1/4", Total Depth = 5 1/8", Total Height = 3 1/4"; Heating Element Size: Length= 7 7/16", Depth= 1 3/8", Height= 1 7/16"; Blower Fan Size: Diameter 60mm x L:185mm; IR Heater Size: L 200*35(mm) ; 1350W, 120V; Temp Switch Size: 105C / 221F.

Includes ball bearing blower fan unit, 3-prong power cord, rheostat variable speed control, thermostat, high temperature wire. Also includes noise reduction padding & velcro, installation instructions. Wall switch for blower NOT REQUIRED.

Blower Total Length = 12.5" Width = 3.73" Height = 3.23" Flange Opening = 9 1/2", Insulation: Class H (rated to 392F / 200C), Motor RPM: 2050, Airflow in C.F.M: 120, Volts: 120, 0.6 Amps, Frequency (hertz): 60, Power Consumption (watts): 35, Certifications: Motor UL Approved. Cross Reference Numbers: BLOT, BLOTMC, HB-RB68, R7-RB84(Rotom), Hunter - 770 (Kit), HDS2000, HDS3000, HFI30, HDV31, MGDV31, SFDV20 (Models)

Fits Monessen Models: 2000 Series (216DV3732, 216DV4136, 216DV4742), 3000 Series (320DV4136, 320DV4742), 624DV See-Thru Designer, BDV BDV7 Series (300BDV, 400BDV, 500BDV, 600BDV), CDV CDV7 Series (CDVR33, CDVR36, CDVR42, CDVR47, CDVT33, CDVT36, CDVT42, CDVT47), CLDV CRDV Designer Series, Chesapeake (CFX24, CFX32), DBX24, DFX Series (DFX24, 24DFX, DFX32, 32DFX), DFS Series (DFS32, DFS36, DFS42), DIS33, DZ36, GDVR36, GDVR42, GDVT36, GDVT42, GCUF36, GCUF42, GRUF36, GRUF42, GSTF36 See-Thru...

Hongso Electric Fireplace Blower / Squirrel Fan & Heating Element

➤Fits Heat Surge brand electric fireplace

Total Width (Does not include Heating Element) = 10", Depth = 3 1/2", Height = 3" Blower fan Size: Diameter 48mm x L:190mm; IR Heater size:L 210*35(mm) ; 1350W, 120V