Best Aluminum Fireplace Fans in 2026

Warm your room up to 31% faster with the mid-sized Ecofan model, the Ecofan UltrAir

Ideal for rooms up to 240 square feet, the UltrAir circulates more warm air further into your room!

Tested and proven to save you up to 14% in fuel with more efficient distribution of heat from your wood stove

【Powerful Airflow 】Used to DIY cool various electronic devices such as cigar humidor, TVs, mondems, routers, computer case, ps4, amplifier, fireplace, kitchen cabinet, window, server, humidifier, mushroom , grow tent, Reptile Enclosures and more.

【 Plug and Play 】Can be adjustment low speed 700rpm to 3000rpm high Speed Fan is compatible with a wide range of voltage inputs including 110V, 120V, 220V, and 240V AC. Features a multi-speed controller to set the fan’s speed to optimal noise and airflow levels.

【 Dual-ball 】 Powerful airflow fan have a lifespan of 50,000 hours and allows the fans to be laid flat or stand upright.The power adapter increases maximum fan speed and enables the fan to be powered through an AC outlet. Safe to run non-stop 24/7.

Sealed Ball Bearing Motor - Engineered to Run with Power & Quiet

Blower Housing Manufactured in USA - 1 Year Comprehensive Warranty

Features - Variable Speed Switch to regulate Air Flow, Combined with the automatic power activation of a Heat Sensor

★ Wood Stove Fan: Be different from other traditional 3/4 blades wood stove fans, our 5 blades heat powered fireplace fan will provide more larger airflow to circulate the warm air horizontally all-around your house to keep it more warm.

★ Silent Operation: Spread heat around room and increase temperature with low noise, improve warm air circulation which results in greater comfort and reduce wood consumption from your stove.

★ Ultra Quiet Operation: Spread heat around room and increase temperature with low noise, improve warm air circulation which results in greater comfort and reduce wood consumption from your stove. Satisfy you to enjoy warmth and comfort in a quiet environment.

Upgrade Version- Produces more warm air than the old version, circulates about 230CFM.

Eco Friendly- Heat Powered, the stove fan generates its own energy by the heat from the stove surface, and no batteries or electricity required.

Easy operation- No assembly needed, just put on the top of stove, the fan will spin with the temperature getting higher.

Magnetic Thermostat Switch for Fireplace Stove Blower Fan / Kit use, no screws and nuts needed

Temperature switch closes (turn on) at approximately 120°F and opens (shut off) at approximately 90°F (+/- 5°F tolerance)

Measures 2 1/2-inches in length by 1-3/4-inches in width.

``Please kindly note that Blower will not start until thermodisc is heated to approximately 120° F, if you have any other questions, please feel free to contact us.

This Magnetic Thermostat Switch is fit for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace. This fireplace blower switch doesn't need screws and nuts.

The switch Specifications: Length 2 1/2 x Width 1 3/4 x Height 1inch;

【Upgrade 5 Blades WoodStove fan】The Cocoon fan for wood stove is equipped with 5 Blades, has Faster Speed and Larger Air Volume than 4 Blades, The heat active stove fan is designed to circulate the warm air created by a wood/coal or pellet-burning. Efficiently circulates warm air throughout the room

【Heated Powered Stove Fan Non-electirc】Our Thermal fan for wood stove is an Environment-friendly Eco fan. The thermoelectric module acts as a small generator to power the fan's motor. No batteries or power required! Improved warm air circulation results in greater comfort and reduces wood consumption from your stove

【Quiet Operation】 This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves

&#9989 [ Must-Have Fireplace Accessories ] - Heat powered wood stove fan V266 makes your room warm faster + Magnetic thermometer monitors stove temperature to avoid over-heat.

&#9989 [ Large Airflow ] - Height 23cm, blow heat up to 490ft/m, max airflow up to 182CFM, ideal for large wood burning stoves or multi-fuel freestanding stoves and large rooms.

&#9989 [ No Running Cost ] - Self-starts at temp as low as 50°C / 122°F, no batteries or electricity required. Ideal operation temp is around 482°F/250°C, if the max temp on your stove top is even below 212°F/100°C, our stove fan is NOT recommended for you.

Heat powered - no batteries or electricity required.

Efficiently circulates warm air throughout the room.

Less consumption, more efficiency.

&#9989 - [ Updated Design ] New Designed magnetic wood stove thermometer, easier to read the temperature.

&#9989 - [ Exclusive White Needle ] The bright color needle moving is clearly visible even from far away.

&#9989 - [ Accurate Temperature Reading ] Face reads 100 to 800 °F with extreme accuracy.

Necessary Fireplace Accessories- the stove fan is widely used for gas, electric, pellet stove or wood burning stove, stove fans will work well and disperse hot air efficiently. wood stove fireplace fan

Eco Friendly-The stove fan is powered by heat from your fireplace or wood burning stove, no batteries or electricity required. The hotter the stove is, the faster the stove fan spins. wood stove fireplace fan

Silent Operation- The only moving part of the stove fan is the blades assembly, so the working noise is below 25DB, very quiet. You even do not know the stove fan is there, but you will feel the warmth well. wood stove fireplace fan

Kit includes ball bearing blower, 3-prong power cord, rheostat variable speed control, thermostat, Velcro mounting strips and noise reduction padding

Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA

Total Length = 12.5" Width = 3.23" Height = 3.73" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 60 Hertz, 35 Watts, CW Rotation, Class H Motor Insulation (rated to 392°F / 200°C)

COMPLETE KIT - Includes speed control, knob, and mounting nut.

UNIVERSAL FIT - Fits most pre-drilled OEM fireplace rheostat holes.

INFINITELY ADJUSTABLE - Fine tune the speed and blower noise level exactly where you want it.

▼ Magnetic Thermostat Switch for Fireplace Stove Blower Fan / Kit use, no screws and nuts needed.

▼ Durable quality replacement parts. ▼ Upgraded part used: Stainless Steel #430 + High heat resistant ceramic (white part) thermo sensor.

▼ Thermostat switch activate approximately at 120°F (50°C), shut off approximately at 90°F (32°C)

➤ The Fireplace Stove Blower Fan Variable Rheostat Speed On /Off Switch Control, Fireplace Fan Speed Control. It allows you to control the speed of any fan.

➤ Package includes: rheostat, locking nut, knob, male fast on connectors and double-sided tape. Double-sided tape makes it easier to install. You can stick it to any place where it is convenient for you to use.

➤ Technical Details: 120V ; Frequency: 60HZ ; MAX Consumption: 300W; Rheostat, UL Approved. The adjust range of the fireplace fan speed controller is from 65% to 100%.

Features a 3 position off/low/high switch

Easily attaches to the rear heat shield with 4 screws

Ideal for free standing stoves models 50-SFP12 and 50-SNC13

A quiet blower fan kit with smart controls, designed to boost airflow coming from your fireplace.

Being a standard size, it can replace blowers found in Lennox, Hearth Glo, Majestic, Rotom, and other fireplaces.

Programmable controller features temperature triggers, countdown timers, alarms, and 10 fan speeds.

Upgrade Version- Produces more warm air, circulates about 240CFM

Eco Friendly- Heat Powered, the stove fan generates its own energy by the heat from the stove surface, and no batteries or electricity required.

Easy operation- No assembly needed, just put on the top of stove, the fan will spin with the temperature getting higher enough.

★ Included With Purchase - Thermostat limit switch

★ Universal Fit - The thermostat on/off switch used in universal wood stoves, fireplace blower kits, gas log firplaces

★ Very Easy to Install - The thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox.

【Powerful Motor】The upgraded motor makes the stove fan ST-145 more powerful, and the applicable room area is 22 square meters, which is double that of the fan using the old motor. Moreover, the upgraded motor saves fuel by up to 14%, which is not only environmentally friendly but also brings you more powerful heating.

【Silent Operation Imported Motor】 The motor of our stove fan is imported from Japan, smooth and super quiet, the noise of the wood stove fan is less than 25db when operating. Longer service life and environmental protection. Effectively evenly distribute warm air throughout the room, reducing the fuel burned for you in the cold day.

【No Additional Running Costs】Heat powered - no batteries or electricity required, the stove fan is powered by heat from the fireplace or wood burning stove, the fireplace fan automatically adjusts its rotation speed with the temperature of the surface of the stove.

Upgraded 5-Blade will provide larger air volume, diverting the warm air horizontally all around your house but not give you the hot wind directly. The way making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. A magnetic thermometer included to monitor the temperature of your stove

No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity

Silent operation, spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. More stable and environmental protection

👉 Hongso Replacement Fireplace Blower Fan KIT for Heat N Glow GFK-160A; Regency Wood Stove Insert 846515; Royal GFK-160; Jakel; Rotom # R7-RB168 (2016 model)

👉 Dual Blower Fans with Center Mounted Ball Bearings Motor; Right-angled Stand, the direction of the wind can be adjusted with 90 degrees; 3-prong Power Cord, universal connecting wires, rheostat & thermostat, installation instructions. 👉It is not pre wired, easy to install with the installation instructions and wiring diagram

👉 Universal fit blower kit; High Quality, Powerful, Quiet, Superbly Balanced, Energy Efficient and Long Lasting

Fits Fireplace Brands (Find MODELS in Product Description): GTI, Heatilator, Heat N Glo, Quadra-Fire.

Cross Reference Part #: GFK-160, GFK-160A, GFK-160B, Fasco 7002-1241, A133, 3315, Rotom R7-RB168 R7-RB168B, HB-RB168, R7-RB27, HB-RB50, HB-RB166 HB-RB167, Regency Wood Stove 846515, FK26 Dutchwest, Stardance, SNV30, FAB-1600, FK-180 (Osburn, Valley Comfort, Pacific), P168DBB

Total Length = 12 7/8" Height = 4 1/4" Width = 4 1/4"; Motor RPM: 3000 ; Airflow in C.F.M: 160 ; Volts: 120 ; Frequency (hertz): 60; 1.0A.

Ttm heat powered stove fan - increases the efficiency of your freestanding stove oven or wood/ log burner to generate warmth economically.

and self-powered - a thermoelectric module acts as a small Generator to power the fan's motor. No batteries or electricity required.

Save energy: tested and proven to save you up to 12% in fuel with more efficient distribution of heat from your wood stove. Improved warm air circulation results in greater comfort and less fuel consumption from your stove.

◆S31105 Fireplace Blower 110V ~ 120V for GHP Group, Monessen / Majestic (MHSC Brands), Majestic Dutchwest Windsor, CFM US Century Plate Steel Freestanding Wood Stove Fireplaces.

◆Blower Includes: 4 Mounting Hardware Screws and 1 Heat Gasket. Feature: This is the Speed Variable Fireplace Blower Fan, Quiet, Energy Saving and Promote the flow of air and quickly increase the temperature of the room, make you feel comfortable in cold weather.

◆Fits MHSC Windsor Series Plate Stoves: WR1000L02, WR1500L02, WR2000L02, WR247001, WR244, WR270007, WR300007; ◆Fits CFM: S244E, FW247001, S274E, FW27007, FW300007, CJW1000L02, CJW2000L02. ◆Fits GHP: HWS-224172MH-B , HWS-224172MH-BCA , HWS-227202 , HWS-230292 , LWS-127201-B , LWS-127201-BCA, LWS-130291-B , LWS-130291-BCA

※Heat Powered Fan- The wood stove fan is powered by heat, no batteries or electricity required. It converts the heat generated by the stove or the fireplace into electrical energy to drive the fan to spin. It's quite environmental friendly.

※4 Blades Wood Burner Fan- This wood burning fan is newly designed with 4 blades, which makes the fan deliver a very broad thermal current. The hotter the stove top is, the faster the fan spins and the more warm air it circulates.

※Whisper Quiet- The only moving part of this small heat powered fan is the blades assembled. Silent running(less than 25db), say goodbye to the terrible noise. You even don't know the stove fan is there, but you will still feel the warmth and enjoy the warm air in a quiet and comfortable environment.

Premium Quality :Our stove flue pipe thermometer is consist of aluminum dial, bimetal thermometer sensor, brass pointer and metal handle, sturdy and durable, you can use for a long time.

Accurate Temperature Reading;Face reads 100 to 900 °F with extreme accuracy.

Exclusive Golden Needle: The bright color needle moving is clearly visible even from far away.

95 CFM, 3000 RPM, 60 Hz, 1.05 A

Englander Pellet Stove OEM Blower PU-4C442

1 Year Warranty

Replaces room blower for pellet stoves

Genuine US Stove Company OEM part

Easy Do-it-yourself repair with square vented opening