Best Aluminum Fireplace Fans in 2026

Compact Size--8.7 x 6.7 x 3.6 inches, the material of the stove fan is aluminum.

No Batteries or Electricity required--The wood burner fan uses heat from the stove surface to spin, adjusting its speed automatically with the stove surface temperature.

Longer lifetime--There is a Bi-metallic safety device at the base of the stove fan. If the surface temperature rises around 300℃, the safety device gently elevates the front of the fan to protect the TEG and motor.

High airflow fans designed for doorway, wood stoves, room-to-room, fireplace, and circulation projects

Features a fan speed controller so you can optimize the airflow and noise for your application.

UL-certified fan with dual-ball bearings has a lifespan of 67,000 hours. Can be mounted in any direction.

&#9989 [ Must-Have Fireplace Accessories ] - Premium anodized aluminum heat-powered wood stove fan N429 makes your room warm faster + Magnetic thermometer monitors stove temperature to avoid over-heat.

&#9989 [ Compact Design ] - Height only being 19 cm / 7.48'' to fit narrow spaces, ideal for all kinds of wood burning stoves, gas stoves, pellet stoves, etc.

&#9989 [ No Running Cost ] - Self-starts at temp as low as 50°C / 122°F, no batteries or electricity required. Ideal operation temp is around 482°F/250°C, if the max temp on your stove top is even below 212°F/100°C, our stove fan is NOT recommended for you.

Upgraded 5-Blade will provide larger air volume, diverting the warm air horizontally all around your house but not give you the hot wind directly. The way making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. A magnetic thermometer included to monitor the temperature of your stove

No batteries or mains electricity required, the thermoelectric module acts as a small generator to power the fan's motor. The fan base and blade are made from anodized aluminum which is rust-proof, wear-resisting, with good thermal conductivity

Silent operation, spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. More stable and environmental protection

Ttm heat powered stove fan - increases the efficiency of your freestanding stove oven or wood/ log burner to generate warmth economically.

and self-powered - a thermoelectric module acts as a small Generator to power the fan's motor. No batteries or electricity required.

Save energy: tested and proven to save you up to 12% in fuel with more efficient distribution of heat from your wood stove. Improved warm air circulation results in greater comfort and less fuel consumption from your stove.

Premium Quality :Our stove flue pipe thermometer is consist of aluminum dial, bimetal thermometer sensor, brass pointer and metal handle, sturdy and durable, you can use for a long time.

Accurate Temperature Reading;Face reads 100 to 900 °F with extreme accuracy.

Exclusive Golden Needle: The bright color needle moving is clearly visible even from far away.

【Upgraded & Premium Quality】- Our Stove Thermometer is designed with aluminum dial, bimetal thermometer sensor, brass pointer and metal handle, which is sturdy, durable and easy to use, providing good oven temperature monitoring for your home.

【Magnetic Stove Thermometer】- The back of the stove flue pipe thermometer is a magnet, so that it can be placed on the top or side of the stove, or on a single-wall flue. Magnet attaches the thermometer to the stove can monitor and optimize the work efficiency of your stove, protecting the stove fan from being damaged by overheating.

【Accurate Temperature Reading】- The measuring temperature range of the wood stove thermometer is 100-900°F, providing accurate temperature measurement, and the large dial is convenient for reading.

MORE EFFECTIVE-This heat powered stove fan with 8 blades circulates 50% more warm air than standard 4-blade fan.

NO NEED ELECTRICITY-Heat powered by wood burning stove top.

WHISPER QUIET-Working noise of CRSURE double motors dual fan is <25dB.

【Durable Wood Stove Fan】 - Hanaoyo fireplace fan is made of high qualified anodized aluminum,rust-proof with good thermal conductivity.

【6-Balde Heat Powered Wood Stove Fan】 - Working without electricity. 6-Blade Classic with upgrade design is not only beautiful, also improves more than 55% efficiency of air circulation throughout the room. Package also includes with a free magnetic thermometer. More convenience.

【Ultra-Quiet Motor Operating】 - Hanaoyo stove fan distributes heat more evenly also working with a lower noise ( ≤25db） at the same time.

[LARGE SIZE & POWERFUL]: 5 Blades Large Size wood stove fan with double chips, much more powerful to create lager air volume and maximize heat distribution throughout the room. This fireplace fan can make a noticeable difference and help your room warm faster.

[HEAT POWERED & ENERGY SAVING]: Non electric and no batteries required, thermoelectric module acts as a small generator to power the fan motor. Wood stove fan improve your stove efficiency and reduce wood and energy consumption. A necessary fireplace accessories for wood burning stoves, gas, pellet stoves, etc.

[START AUTOMATICALLY]: Start-up temperature as low as 60°C(140°F), optimal working temperature is when stove top surface reaches 200°C to 320°C (392°F - 608°F). The hotter the stove is, the faster the thermal fan spins. (Don’t exceeds 345°C / 650°F).

Includes replacement fireplace blower only. No power cord or instructions. Total Length = 7.5" Width = 3.73" Height = 3.23" Flange Opening = 4 7/8", Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3050, Airflow in C.F.M: 98, 120V, 0.5 Amps, 60Hz, Power Consumption (watts): 31W Rheostat Variable Speed: NO; Magnetic Thermostat: NO; Material: Aluminum + Galvanized Steel; Certifications: Motor UL Approved

Can be used as a universal replacement blower. Cross Reference Numbers: Blower unit only, GFK21, FK21, GFK21B, R7-RB66, HB-RB21K, HB-RB130, R7-RB21, BLOTBLDV, BLOTSDV, Novus 30, Security UZY3. Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. The "Fits" BRAND and MODEL # are Reference ONLY! Any questions or concerns, please contact us before ordering.

▶︎Fits Majestic: 300DVB, 300DVBH, 300DVBL, 300DVBLNSC7, 300DVBLPSC7, 32VFSC, 32VFSNVC, 32VFSPVC, 33BDVR, 33BDVREN, 33BDVREP, 33BDVRRN, 33BDVRRP, 33BDVT, 33BDVTEN, 33BDVTEP, 33BDVTRN, 33BDVTRP, 33ISDG, 33LDV, 33LDVR, 33LDVREN, 33LDVREP, 33LDVRRN, 33LDVRRP, 33LDVT, 33LDVTEP, 33LDVTIN, 33LDVTIP, 33LDVTRN, 33LDVTRP, 33XDV, 33XDVR, 33XDVREN, 33XDVREP, 33XDVRRN, 33XDVRRP, 360DVS2, 360DVS2RN...

Blower size: Length x Width x Height (inches): 12.5 x 3.73 x 3.23; Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3000 Airflow in C.F.M: 130 Ratings: 120V, 60Hz Power Consumption (watts): 31 Rheostat Variable Speed: NO; Magnetic Thermostat: NO; Material: Aluminum + Galvanized Steel; Certifications: Motor UL Approved

For Heatilator: A36C, A36CH, A42C, A42CH, ADI60S, ADI-ZC-FB, ADI-ZCFB-S, BCDV36, BE-36-C, BE-36-CIPI, BV4236DBI, BV4842DBI, CB4236IR, CB4236MIR, CB4842IR, CB4842MIR, CD4236ILR, CD4236ILR-C, CD4236IR, CD4236IR-C, CD4236LR, CD4236MILR, CD4842MILR, CD4236MIR, CD4842MIR, CD4236MLR, CD4842MLR, CD4236MR, CD4842MR, CD4236R, CD4842ILR, CD4842ILR-C, CD4842IR, CD4842IR-C, CD4842LR, CD4842R, CNXT70E, CNXT90E, DV3732SBI, DV3732SBIL, EC36, EC36I, EC39, EC42, EC42I, FP28, FP36, GBi25 SERIES

For Heatilator: GC100, GC100E, GC100L, GC100LE, GC150, GC150E, GC150L, GC150LE, GC200, GC200L, GC300 SERIES, GC300E, GC300LE, GC300FL, GC300FLE, GC300FLLE, GC300ST, GC300STE, GC300STLE, GC361, GC421, GC400 SERIES, GCBC36, GCBC36LE, GCBC42, GCBC42LE, GCBC60, GCBC60I, GCBC60IL, GCBC60L, GCBC80, GCBC80I, GCBC80IL, GCBC80L, GCDC36, GCDC42, GCDC60, GCDC60E, GCDC60L, GCDC60LE, GCDC80, GCDC80E, GCDC80L, GCDC80LE, GDST3831I, GGBC36, GGBC36E, GGBC36L, GGBC36LE,

Upgrade Fireplace Fan: The 5 blades stove fan is less consumption, and more efficient. Increase the indoor air circulation, and the heat of the fireplace will circulate to the entire bedroom or living room with the rotation of the fan, which can improve the heating efficiency of the stove while saving 30% of the fuel cost.

Eco Friendly: The wood stove fan is driven by the conversion of heat energy into electric energy, with no batteries or electricity required. Efficiently circulates warm air throughout the room.

Operating Temperature: The general working temperature of the stove fan is 50°C - 350°C(122°F - 662°F), self-start at temp as low as 50°C / 122°F, the stove fan will spin faster as the temperature increases and down as it decreases. The optimum operating temp is 80-250°C(176-482°F). DO NOT OVER 350°C(662°F).

[FUNCTION] The 5 blades stove fan speed up air circulation and improve the efficiency of fireplace fans, to heat your room quickly. It widely used for wood burning stove, gas stove, pellet stove and more. A thermometer included to monitor the temperature of your stove.

[ADVANTAGE] No batteries or electricity required. The stove fan driven by the heat generated by the fireplace or wood burning stove and conducts to the fan base to drive the blades. The temperature of the fireplace affects the speed of the fan.

[LOW NOISE IN OPERATION] The fan will work at less than 25db, heat around room and increase temperature with low noise. Reduce wood consumption from your stove and provide greater comfort. More stable and environmental protection.

【Non-Electric & Heated Powered Fireplace Fan】 TCFUNDY stove fan is an Eco-friendly fireplace fan for wood burning stove. It uses thermoelectric technology to power, the stove fan will automatically rotate with the temperature getting higher, no batteries or electricity required. Not only warm your room faster, it also saves the fuel consumption and your bills.

【Upgraded 6-Blades Wood Stove Fan】The heat powered stove fan is equipped with 6 blades for softer wind, greater airflow and faster speed. This design is designed to effectively circulate warm air throughout the room. You just need to place this stove fan on flat surface of the stovetop. The optimum operating temp is 80℃-250℃ (176℉-482℉), DO NOT over 350℃ (662℉).

【Overheating Protection】Our stove fan has built-in high temperature protection at the base of the fan. The safety device gently raises the front of the fan to protect the TEG and the motor If the surface temperature exceeds 300°C.

【Upgrade Wood Stove Fan non Electric】 HuiDun 5 blades wood stove fan will circulate larger volumes of warm air, diverting the warm air horizontally all around your house rather than going straight up top the ceil. This wood stove fan non electric is widely used in wood stoves, gas stoves, log burners, Fireplaces, etc.

【High-quality Ecofan Wood Stove Fan】 This fireplace fan base and blade are made from rust-proof anodized aluminum, wear-resisting, with good thermal conductivity. The ecofan is able to no deformation and no discoloration even after a long time working under high temperature.

【Non Electric Fan/Ecofan】 The heat powered fan converts heat energy from the stove surface into kinetic energy to spin, and adjust its speed automatically with the stove surface temperature. No batteries or electricity is required. Working Temp is 150F-662F.

【Double Stove Fan Heat Powered】: Our thermoelectric fan is Compact and energy-efficient, this heat activated fan is powered solely by heat and does not require any batteries or power cords to operate

【2 Year Warranty and Support】: The package includes a stove fan and a free magnetic thermometer. If you are not 100% satisfied, We provide 30 days refund without any reason, if the product quality problem, we provide a 2-year replacement. Don't hesitate to get in touch with us if you have any questions

【Upgraded Aluminum Fan Blade】: The Aluminum curved fan blade lasts longer and spread more heat around the room. The ecofan is 6.5in long and 7.7in high, the heat powered fan can comfortably be used with wood stoves, log burners, and fireplaces

【High Quality Fireplace Fan】Good quality makes you worry-free and twice as warm in winter. The fireplace fan is made of anodized aluminum with higher thermal conductivity, faster speed, larger air volume and lower starting temperature. 4 blades have also been upgraded and strengthened for stable and guaranteed operation, suitable for wood/log burners/fireplaces.

【Energy Saving Principle 】No need for batteries or electricity, heat to electricity. The wood stove fan uses the temperature difference to convert the heat from the chimney into electrical energy to generate electricity. When a certain temperature is reached, it automatically starts working to accelerate the flow of warm air. The heat distribution in the house is improved and the comfort level will be greatly increased.

【Eco-friendly】Make the most of your stove's heat and say goodbye to energy waste. The wood stove fan can horizontally push the warm air gathered around the furnace into the room, improving the circulation of hot air, which can reduce the fuel used by the furnace by about 25%. Live a more comfortable and warm life with less energy consumption!

Upgrade 5-Blades Stove Fan -- Our Premium stove fan composed of 5 blades, can produce more warm air and improve the efficiency of the product, giving you maximum benefit. The stove fans start automatically when placed on top of a stove and adjust their speed with the stove temperature. As the stove burns down and cools, the fans automatically shut off.

Energy Conservation & No Electricity -- This eco-friendly Fan requires no batteries or external power, it is powered by the heat produced by your fireplace or wood-burning stove; The heat of the stove top is conducted through the base of the fan and converted to electricity which powers the fan motor. This low-maintenance fan will help keep your home warm.

Safety Material & Longer Lifetime -- This fireplace fan is made from rust-proof anodized aluminum, wear-resisting, with good thermal conductivity. There is a Bi-metallic safety device in the base of the stove fan. If the surface temperature rises above around 300℃, the safety device gently elevates the front of the fan to protect the thermoelectric module.

【2022 Upgrade 6-Blade Stove Fan】-- 2022 new stove fan composed of 6 blades,can produce more warm air and improve the efficiency of the product. It is widely used in wood stove, gas stove, Log Burner, Fireplace etc. With thermometer can detect the working temperature at any time to ensure the safety of the furnace. The effective working distance of a 6-blade stove top fans can reach 3 meters, which is twice the working distance of a 3-blade fan of 1.5 meters.

【Eco-friendly】-- Heat Powered, the stove fan generates its own energy by the heat from the stove surface, no batteries or electricity required, and can efficiently circulate warm air throughout the room

【Whisper Quiet】-- Newly designed blade, larger air volume, lower noise. The only moving part is the blades assembly, so the working noise is below 32DB. You will enjoy the warm air in a quiet and comfortable environment

❤New Upgrade❤New fan blade ,Faster Speed,Larger Air Volume, Lower starting temperature,Lower noise,Motor has a longer service life, More solid and durable,Highest performing.Never need to turn it on or off, Start working automatically when the starting temperature is reached.Reinforced 4 Blades,Made of premium anodized aluminum, the heat-powered stove fan has a higher thermal conductivity efficiency than those steel ones.

❤Working principle❤Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly.

❤ Energy saving❤ the thermoelectric module acts as a small generator to power the fan motor. No batteries or electricity needed! The improved hot air circulation and ensures greater comfort ,while reduces the wood consumption of the stove.

POWERFUL PERFORMANCE - Compare with a standard 4-blade fan, VIVOHOME fireplace stove fan features 8 extra-strength blades and dual efficient motors, which allow more powerful circulation and greater efficiency than other fans on the market; This is the most efficient way to distribute warm air around the furnace and the circulation is 180 – 250 CFM

NO ELECTRICITY NEEDED - No need for a battery or electricity to make this stove fan operate; VIVOHOME heat powered wood stove fan generates electricity by converting the heat of the stove into electric energy; The generator set converts the heat energy into kinetic energy to drive the motor, then the blades rotate to dissipate heat; The eco-friendly and energy-saving stove fan will reduce wood consumption of your stove and bring a comfortable warm air circulation experience

APPLICABLE TEMPERATURE - Operation Temperature: 122°F-140°F (50℃-60℃); The optimum operating temperature of our heat powered stove fan is 392-527°F (200~275°C); Please note: don't operate at temperatures over 350℃ (662ºF); The built-in bimetallic strip at the bottom of the stove fan is designed to slightly raise the edge of the fan when it approaches the maximum operating temperature to protect the thermoelectric module and motor

【Upgrade Version Fireplace Fan】--Less consumption, more efficiency. This heat powered stove fan tested and proven to save 28% fuel cost, improved warm air circulation results in greater comfort, and reduce wood consumption from your stove.

【Premium Quality】--Made with high-temperature resistant anodized aluminum, The stove fan is designed for usage on freestanding stoves with a normal surface temperature of between 80℃-345℃(176℉-653℉). ★The fan can also be used on Mr. buddy Heater, you can refer to the modification it yourself on YouTube.

【Overheat Protection Design】The Cocoon fan with The radiator temperature display bar can monitor the radiator temperature in real-time. When it displays 60°C /140°F, the fan needs to be removed from the top of the fireplace to avoid the motor damage, ensure the long life of the fireplace fan.

【5 Blades】Upgraded 5-Blade will provide larger air volume, diverting the warm air horizontally all around your house but not give you the hot wind directly. The way making it the most efficient way to heat your room from your stove, widely used for wood burning stove, gas stove, pellet stove and more. A magnetic thermometer included to monitor the temperature of your stove.

【Overheating Protection】The In-built Bi-metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly as the maximum operating temperature is approached to protect the motor and the thermoelectric module. Wood stove fireplace fan.

【Silent Operation】The only moving part of the stove fan is the blades assembly, so the working noise is below 25DB, very quiet. Spread heat around room and increase temperature with low noise, improve warm air circulation results in greater comfort and reduce wood consumption from your stove. More stable and environmental protection.

Durable Material:The stove fan base and blade are made from anodized aluminum, which make the fan not rust or corrode,it is durable enough for a long time use. No installation required,you only need to place the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe.The hotter the stove surface is, the more air the fan circulates. Compact size:8.3x 6.3 x 3.6 inches

Better Heat Distribution:This 4 blades wood burner fan is designed to deliver a very broad thermal current,so it disperse heat from the stove more efficiently and raise the temperature of your room quickly.Circulates 150 - 180 CFM. Improved warm air circulation results in greater comfort and less fuel consumption from your stove.

Safety Protection Design:The stove fan comes with a Bi-metallic safety device.When the stove surface temperature rises above around 300℃,the safety device gently elevates the front of the fan to protect the center module and motor.

Upgraded 6-blade fireplace fan heat powered - The upgraded stove fan is equipped with 6 blades, and the blades are designed at an angle, such an upgraded design will emit more heat, save your wood fuel, and you and your family will feel more warm.

Upgrade the movement - The motor movement is the key to the fireplace fan heat powered, we have upgrade adopts German high temperature material motor and high temperature resistant magnetic coil, movement speed can reach 2800 revolutions per minute. You don't need a battery or power source, the thermoelectric module acts as a small generator, and the wood stove fan heat powered spins using the heat from the cooktop surface. Upgrade the movement, the wood burner fan is more resistant to high temperature and faster.

Upgrade Temperature Sensing - Our fireplace blower has a temperature sensing strip attached to the top of the blower, so you don't need to install a separate thermometer. The auto-sensing temperature strip is sensing the radiator temperature of the fireplace blower fan, it has 4 levels, when the 4th level is reached, please remove the stove fan. Fireplace fan and temperature sensor integrated design makes you more convenient to use.

* IMPORTANT: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. The "Fits" BRAND and MODEL # are Reference ONLY! Any questions or concerns, please email us before ordering.

Replacement Fireplace Blower Fan Unit for Desa Tech, FMI, Vanguard, Vexar, Comfort Flame, Comfort Glow Fireplaces. Cross Reference Numbers: Blower only, BK, BKT, GA3650, GA3650B, GA3700, GA3700A, GA3750, GA3750A, GA3650T, GA3650TB, GA3700T, GA3700TA, 103581-01, 103581-02, 103581-03, 103581-04;

Length x Width x Height (inches): 15.0 x 4.0 x 3.5 Motor Type: Ball Bearing Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3000 Airflow in C.F.M: 160 Ratings: 120V, 60Hz Power Consumption (watts): 45 Rheostat Variable Speed: NO Magnetic Thermostat: NO; Material: Aluminum + Galvanized Steel; Packaging Materials: Shipping box; Certifications: Motor UL Approved;

By changing the direction of propagation of the heat emitted by the wood stove, the warm air throughout the room is effectively circulated, reducing the wood consumption required to reach the same heat in the room.

When the temperature of the stove fan reaches above 50 degrees, the heat energy will be converted into electrical energy to drive the fan without the need to connect to electricity.

The 6 fan blades are more powerful than standard fan drive, which can circulate indoor air faster. And the working sound is <24dB, which does not cause any sound disturbance and operates almost quietly.

🔥【Easy to Use & Costs Nothing】 No installation, no trouble, no battery or power supply! Just put the stove fan on the stove which has a smooth and hot flat surface, it will rotate as the temperature rises. Easy and efficient!

🔥【Energy Saving & Environmental Protection】 The heat powered stove fan is designed to circulate the warm air created by a wood/ coal or pellet burning. Fully utilize the heat from your wood stove and disperse it to your room. The fan uses 28% less wood. It's a wonderful natural circulation element. You can enjoy warmth in your room, increasing your comfort.

🔥【Overheat Protection Device】 The fan is made of anodized aluminum, so the fan will not rust or corrode over heat, so it is strong and durable. A bimetal safety device is installed at the bottom of the fan. If the surface temperature exceeds 650℉ /345℃, the safety device gently lifts the front end of the fan to reduce the contact surface between the fan and the wood stove to protect the TEG and starter.

<p><b>【Operating Principle】</b>：Convert heat energy into electric energy, drive the heat powered thermal fan to rotate. The rotation speed of the wood burner stove fan depends on the temperature of the fireplace. Operating temperature 122° F - 662° F (50 ℃ - 350 ℃).</p>

<p><b>【Environment Protection】</b>：High temperature self generation, improved hot air circulation can bring greater comfort, and the wood used in the stove is reduced by about 28%. No Batteries or Electricity Required!</p>

<p><b>【New Design】</b>: The heat powered fireplace fan is made of high-strength aluminum alloy and has been oxidized, which can withstand high temperature up to 662℉ (350 ℃). Even if heat powered wood stove fan work at high temperature for a long time, they will not deform or change color</p>