Best Bbq Factory in 2026

* IMPORTANT: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. The "Fits" BRAND and MODEL # are Reference ONLY! Any questions or concerns, please email us before ordering.

Included with Purchase Ball bearing blower, Pre-wired harness for easy installation, Rheostat variable speed control, Magnetic thermostat on/off switch + one spare snap thermostat, 3-prong power cord, Velcro mounting strips, Stainless steel wall switch panel, Noise reduction padding, Installation instructions.

Length x Width x Height (Inches): 15 x 4.0 x 3.5 ; Insulation: Class H (rated to 392F / 200C) ; Motor RPM: 3000 ; Airflow in C.F.M: 160 ; Volts: 120 ; Frequency (hertz): 60 ; Power Consumption (watts): 45 ; Power Cord Length (inches): 75 ; Rheostat: Yes ; Thermostat: Yes, activate at 120F / 50C, shutoff at 90F / 32C ; Certifications: Rheostat, Thermostat, Motor UL Approved.

Replacement for Heat Surge brand electric fireplace;

Blower fan Size: Diameter 48mm x L:190mm ; Heater size: L210*35(mm) ; 1350W, 120V;

Blower from factory direct, UL listed, Quiet;

* IMPORTANT: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. The "Fits" BRAND and MODEL # are Reference ONLY! Any questions or concerns, please email us before ordering.

Replacement Fireplace Blower Fan Unit for Desa Tech, FMI, Vanguard, Vexar, Comfort Flame, Comfort Glow Fireplaces. Cross Reference Numbers: Blower only, BK, BKT, GA3650, GA3650B, GA3700, GA3700A, GA3750, GA3750A, GA3650T, GA3650TB, GA3700T, GA3700TA, 103581-01, 103581-02, 103581-03, 103581-04;

Length x Width x Height (inches): 15.0 x 4.0 x 3.5 Motor Type: Ball Bearing Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3000 Airflow in C.F.M: 160 Ratings: 120V, 60Hz Power Consumption (watts): 45 Rheostat Variable Speed: NO Magnetic Thermostat: NO; Material: Aluminum + Galvanized Steel; Packaging Materials: Shipping box; Certifications: Motor UL Approved;

* IMPORTANT: Please measure the space for installing this blower in your Stove or Fireplace, and compare with the dimension of this blower. Any questions or concerns, please email us before ordering.

Length x Width x Height (inches): 13.63 x 4.63 x 4.5 Motor Type: Ball Bearing Insulation Class H (rated to 392°F / 200°C) Motor RPM: 3000 Airflow in C.F.M: 130 Ratings: 120V, 60Hz Power Consumption (watts): 35; 3-prong Power Cord: YES Power Cord Length (inches): 75 Rheostat Variable Speed: No Magnetic Thermostat: NO Material: Aluminum + Galvanized Steel

Replacement for Lennox: LMDVT-3328, LMDV-3530, LMDV-4035, LMDVR-3328, MPDT-3328, LMDV-3530, LMDV-4035, MPDT-3328, MPD- 3530, MPD-4035, MPD-4540, MPDT-3328, MPDR-3328, MPD-3530, MPB Series, MLDVT Series, MLDVTCD Series, SLDVT Series, UVF Series, UVFRC Series, MPD35ST, MPD35PF, EDV3530, EDV4035, EDV4540, EDVSTNM, EDVSTPM, EDVPFNM, EDVPFPM, EDVCRNM, EDVCRPM, EDVCLNM, EDVCLPM, EDVSTNE, EDVPFNE, EDVCRNE, EDVCLNE, EDVSTNM, EDVSTPM, EDVPFNM, EDVPFPM, EDVCRNM, EDVCRPM, EDVCLNM

Heat powered - no batteries or electricity required.

Efficiently circulates warm air throughout the room.

Less consumption, more efficiency.

Kit includes dual blower unit, 3-prong power cord, rheostat variable speed controller, automatic thermostat and 2-prong adapter

Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA

Total Length = 12 3/4" Height = 4 1/16" Width = 4" | 180 CFM, 1.6A, 3000 RPM, 120 Volts, 60 Hertz, CCW Rotation, Class H Motor Insulation (rated to 392°F / 200°C)

Compact & sturdy:Dimensions 19" X 8",beautiful wood color finish, zinc-cast nozzle, crafted from ply board and black artificial leather look with rivets. Perfect handheld sized for fire pit BBQ barbecue tool kit and small enough to hang next to the fireplace, chimney and wood stove.

Simple to use & ideal gift: Bellows draw in air through a hole in the bottom and force it out through a nozzle. This eliminates the need to blow directly into a fire, thus reducing the risks of burns. Bellows make an ideal housewarming gift for a home with a fireplace.

Decorative:A fireplace bellow is both decorative and useful. Traditionally design has become more of a piece of art. It can add a decorative touch to any wood burning fireplace and create a more rustic setting, make for some nice home decor on the wall.

Warm your room up to 31% faster with the mid-sized Ecofan model, the Ecofan UltrAir

Ideal for rooms up to 240 square feet, the UltrAir circulates more warm air further into your room!

Tested and proven to save you up to 14% in fuel with more efficient distribution of heat from your wood stove

Warm your room up to 38% faster with the largest and highest performing Ecofan model, the Ecofan AirMax

Ideal for all room sizes, the AirMax circulates more warm air further into your home!

Tested and proven to save you up to 18% in fuel with more efficient distribution of heat from your wood stove

Sealed Ball Bearing Motor - Engineered to Run with Power & Quiet

Blower Housing Manufactured in USA - 1 Year Comprehensive Warranty

Features - Variable Speed Switch to regulate Air Flow, Combined with the automatic power activation of a Heat Sensor

★ Wood Stove Fan: Be different from other traditional 3/4 blades wood stove fans, our 5 blades heat powered fireplace fan will provide more larger airflow to circulate the warm air horizontally all-around your house to keep it more warm.

★ Silent Operation: Spread heat around room and increase temperature with low noise, improve warm air circulation which results in greater comfort and reduce wood consumption from your stove.

★ Ultra Quiet Operation: Spread heat around room and increase temperature with low noise, improve warm air circulation which results in greater comfort and reduce wood consumption from your stove. Satisfy you to enjoy warmth and comfort in a quiet environment.

Compact Size--8.7 x 6.7 x 3.6 inches, the material of the stove fan is aluminum.

No Batteries or Electricity required--The wood burner fan uses heat from the stove surface to spin, adjusting its speed automatically with the stove surface temperature.

Longer lifetime--There is a Bi-metallic safety device at the base of the stove fan. If the surface temperature rises around 300℃, the safety device gently elevates the front of the fan to protect the TEG and motor.

Magnetic Thermostat Switch for Fireplace Stove Blower Fan / Kit use, no screws and nuts needed

Temperature switch closes (turn on) at approximately 120°F and opens (shut off) at approximately 90°F (+/- 5°F tolerance)

Measures 2 1/2-inches in length by 1-3/4-inches in width.

Upgrade Version- Produces more warm air than the old version, circulates about 230CFM.

Eco Friendly- Heat Powered, the stove fan generates its own energy by the heat from the stove surface, and no batteries or electricity required.

Easy operation- No assembly needed, just put on the top of stove, the fan will spin with the temperature getting higher.

Kit includes ball bearing blower, 3-prong power cord, rheostat, thermostat, galvanized mounting bracket, noise reduction padding and installation instructions. Wall switch NOT required.

Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA

Total Length = 12.5" Width = 3.23" Height = 3.73" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CW Rotation, 120° / 90° Thermostat, Class H Motor Insulation (rated to 392°F / 200°C)

High airflow fans designed for doorway, wood stoves, room-to-room, fireplace, and circulation projects

Features a fan speed controller so you can optimize the airflow and noise for your application.

UL-certified fan with dual-ball bearings has a lifespan of 67,000 hours. Can be mounted in any direction.

``Please kindly note that Blower will not start until thermodisc is heated to approximately 120° F, if you have any other questions, please feel free to contact us.

This Magnetic Thermostat Switch is fit for Fireplace Blower Fan, Wood Stove, Gas Log Fireplace. This fireplace blower switch doesn't need screws and nuts.

The switch Specifications: Length 2 1/2 x Width 1 3/4 x Height 1inch;

&#9989 [ Must-Have Fireplace Accessories ] - Heat powered wood stove fan V266 makes your room warm faster + Magnetic thermometer monitors stove temperature to avoid over-heat.

&#9989 [ Large Airflow ] - Height 23cm, blow heat up to 490ft/m, max airflow up to 182CFM, ideal for large wood burning stoves or multi-fuel freestanding stoves and large rooms.

&#9989 [ No Running Cost ] - Self-starts at temp as low as 50°C / 122°F, no batteries or electricity required. Ideal operation temp is around 482°F/250°C, if the max temp on your stove top is even below 212°F/100°C, our stove fan is NOT recommended for you.

【Upgrade 5 Blades WoodStove fan】The Cocoon fan for wood stove is equipped with 5 Blades, has Faster Speed and Larger Air Volume than 4 Blades, The heat active stove fan is designed to circulate the warm air created by a wood/coal or pellet-burning. Efficiently circulates warm air throughout the room

【Heated Powered Stove Fan Non-electirc】Our Thermal fan for wood stove is an Environment-friendly Eco fan. The thermoelectric module acts as a small generator to power the fan's motor. No batteries or power required! Improved warm air circulation results in greater comfort and reduces wood consumption from your stove

【Quiet Operation】 This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves

&#9989 [ Must-Have Fireplace Accessories ] - Premium anodized aluminum heat-powered wood stove fan N429 makes your room warm faster + Magnetic thermometer monitors stove temperature to avoid over-heat.

&#9989 [ Compact Design ] - Height only being 19 cm / 7.48'' to fit narrow spaces, ideal for all kinds of wood burning stoves, gas stoves, pellet stoves, etc.

&#9989 [ No Running Cost ] - Self-starts at temp as low as 50°C / 122°F, no batteries or electricity required. Ideal operation temp is around 482°F/250°C, if the max temp on your stove top is even below 212°F/100°C, our stove fan is NOT recommended for you.

Heat powered - no batteries or electricity required.

Efficiently circulates warm air throughout the room.

Less consumption, more efficiency.

【Heat Powered】This small wood stove fan is a perfect addition to every home that has a wood stove. No batteries or electricity required, but simply the heat from your stovetop, this eco friendly fan allows you to get the maximum heat from your wood burner stoves.

【Easy to Use】No assembly required, you only need to place this mini stove fan on a smooth flat surface of your stovetop, the stove fan will automatically rotate with the temperature getting higher. The hotter the stovetop is, the faster the stove fan spins and the more warm air the eco fan circulates.

【Operating temperature】The working temperature of this wood stove fan is 85-350°C. It starts spinning when the temperature gets around 55°C, and works most efficiently when it gets around 200-300°C. But please avoid using the fan at high temperature continuously for a long time. Kindly note that its working efficiency will be various as per your stovetop temperature.

Necessary Fireplace Accessories- the stove fan is widely used for gas, electric, pellet stove or wood burning stove, stove fans will work well and disperse hot air efficiently. wood stove fireplace fan

Eco Friendly-The stove fan is powered by heat from your fireplace or wood burning stove, no batteries or electricity required. The hotter the stove is, the faster the stove fan spins. wood stove fireplace fan

Silent Operation- The only moving part of the stove fan is the blades assembly, so the working noise is below 25DB, very quiet. You even do not know the stove fan is there, but you will feel the warmth well. wood stove fireplace fan

&#9989 - [ Updated Design ] New Designed magnetic wood stove thermometer, easier to read the temperature.

&#9989 - [ Exclusive White Needle ] The bright color needle moving is clearly visible even from far away.

&#9989 - [ Accurate Temperature Reading ] Face reads 100 to 800 °F with extreme accuracy.

★ Included With Purchase - Thermostat limit switch

★ Universal Fit - The thermostat on/off switch used in universal wood stoves, fireplace blower kits, gas log firplaces

★ Very Easy to Install - The thermostat has a magnet instead of having to mount it with screws, attach the magnetic heat sensor to the underside of the firebox.

Creates its own electricity and easily pushes up to 100 CFM

Uses less fuel and contains a whisper quiet design

Includes a 2 year warranty

Kit includes ball bearing blower, 3-prong power cord, rheostat variable speed control, thermostat, Velcro mounting strips and noise reduction padding

Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA

Total Length = 12.5" Width = 3.23" Height = 3.73" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 60 Hertz, 35 Watts, CW Rotation, Class H Motor Insulation (rated to 392°F / 200°C)

Kit includes 100% ball bearing blower and 3-prong power cord. Also includes galvanized mounting bracket, noise reduction padding and installation instructions. Wall switch required.

Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA

Total Length = 13.63" x 4.63" x 4.5" | Blower Length = 12.5" Width = 3.73" Height = 3.23" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CCW Rotation, Class H Motor Insulation (rated to 392°F / 200°C)

Kit includes 100% ball bearing blower, 3-prong power cord, rheostat variable speed control (replaces wall switch). Also includes galvanized mounting bracket, noise reduction padding and installation instructions

Comes fully assembled and pre-wired. Easy DIY installation. Instructions included. 1 year comprehensive warranty. Assembled and tested in Racine, WI USA

Total Length = 13.63" x 4.63" x 4.5" | Blower Length = 12.5" Width = 3.73" Height = 3.23" Flange Opening = 9 1/2" | 130 CFM, 3000 RPM, 120 Volts, 0.86 Amps, 35 Watts, CCW Rotation, Class H Motor Insulation (rated to 392°F / 200°C)

COMPLETE KIT - Includes speed control, knob, and mounting nut.

UNIVERSAL FIT - Fits most pre-drilled OEM fireplace rheostat holes.

INFINITELY ADJUSTABLE - Fine tune the speed and blower noise level exactly where you want it.