Best Plastic Fixed Blade Knives in 2026

SWIVEL JOINT Sheath with paddle holster!! S-TEC is the first in the industry for this unique design.

9" overall length. 3CR13 S. Steel 4.5 inch Blade with a 3.5mm thickness. Great for hunting and outdoor activities.

4.75 inch ABS handle with herringbone pattern coupled with finger loop allows for a secure grip in any situation and response time.

DIMENSIONS: 6.5 inch (16.5 cm) overall length with a blade length of 2.8 inches (7.1 cm), and a weight of 2.39 ounces

DURABLE: Folding blade is made of reliable 1095 HC stainless steel - Made in the USA

BE PREPARED: Single drop point blade has an easily controlled point and a bigger belly for slicing and other general uses

Blade length: 3 5/8 inch

Overall length: 7 inch

Polished Stacked leather handle

Crafted from the highest quality materials

Built for performance and durability

Made in Switzerland

Fixed Blade Knives Dimensions: Overall range 6.4inch/16.2cm, with blade length 2.4inch/6.2cm, handle length 3.9inch/10cm. Knife weigth with kydex sheath is 3.06oz/86.7g.

D2 Stainless Steel Fixed Knife: The knife use D2 Steel blade and stainless steel handle, D2 steel hardness is between 59-62. G10 handle and kydex sheath make the knife be safety and convenient, have confidence that the blade will not slip with the security of the kydex sheath creates a tight hold when not in use.

Fixed Blade Knife with Kydex sheath: The best outdoor Fixed Blade Hunting camping knife you are looking for. Multiple carrying methods, lanyard hole and high-strength lightweight kydex material sheath for easy portability. The end of handle can be multi-purpose such as glass breaker .

dimensions: 9.25 inches overall with a 5.25-inch blade and 4-inch handle

toughness: decorative knife made with high quality 3cr13 carbon steel, this full-tang, tanto-point blade has a corrosion and rust resistant coating, ensuring a solid, fine edge over long periods of time

handling: this tanto knife offers grooved texture on the rubber handle and stainless-steel guard gives the user a no- slip grip for maximum control

· Ccanku Claw Knife Dimension: 7.36 inch (18.7cm) overall length with 3.27inch (8.3cm) blade length and 4.09inch (10.4cm) handle length, knife weight with 105g or 3.70oz.

· Ccanku Fixed Blade Knife Material: The knife use D2 blade and G10 handle , safe and convenient kydex sheaths,have confidence that the blade will not slip with the security of the kydex sheath creates a tight hold when not in use.

· Nice quality EDC Tool: the high quality material keep the knife a long service life. Canku knife professional outdoor camping knives is fully qualified,excellent choice for camping, fishing, hiking, and outdoor survival tool.

Sharp Pointed Blade: Leopcito outdoor dagger is made of stainless steel 3Cr13, with excellent hardness, strong edge retention and rust resistance. Excellent workmanship, sharp and durable, not easy to rust

Safe and Comfortable Knife Handle: Ergonomic brass handle, with 7 strands of black nylon lifeline tied to the handle to provide a non slip grip, provide comfortable and precise operation, and reduce damage to users.

Fixed Blade Knife: Super sharp fighting knife, stronger than any hunting knife or bow and arrow knife. Total length: 11.42 inches; Blade length: 5.51 inches; Weight: 0.57 lb. Blade blackening treatment, it is equipped with a high-strength black Oxford bag material sheath, which is easy to carry.

Handmade by Skilled German Craftsman from Solingen, Germany

Blade Length: 105 mm, Knife Weight: 123 g

Steel / Hardness: 1.4116 German Cutlery Steel / 55-57 HRC, Tested and Proofmarked

▶️ 9.5 INCH FIXED BLADE KNIFE w/ G10 HANDLES - A MUST HAVE knife for emergencies. The knife is designed to fit perfectly into your palm. A solid grip is necessary. It's safer and good to know the knife in your hand is ready for the task. This emergency tool is produced with "ease of use" in mind and all of our knives are designed as EDC knives. This means your tool is always easy to access when you need it. It also has the added benefit of being used as a light duty hammer if required

▶️ FULL TANG 4.75 INCH SPEAR POINT BLADE - Each blade is professionally heat treated to balance hardness and toughness, increasing blade durability and capabilities. A harder knife blade can perform better than a softer blade. Toughness is the ability to resist chipping, cracking or breaking. Using a very hard blade without toughness, such as a blade made from glass, will be very easy to break. This is why balancing hardness and toughness is so important and why we heat treat every single blade

▶️ 4.3mm D2 STEEL BLADE - Excellent Balance of Hardness and Toughness. Provides Razor Sharp Cutting Performance, High Durability and Easy Edge Maintenance. We chose this steel so the blade can resist any hard corrosion and increase the life expectancy of the blade edge. This allows our knives to provide razor sharp cutting performance over and over again

Blade steel: 8CR14MOV (High carbon stainless steel),Sharp point length of knife: 2.3inch (5.8cm)

Blade handle material: G10 ，G10 surface carved with anti-skid lines

Full length of knife: 6.5inch (16.7cm),Handle length: 4.3inch (11cm)

▶️ 10 INCH FIXED BLADE KNIFE w/ G10 HANDLES - A MUST HAVE knife for emergencies. The knife is designed to fit perfectly into your palm. A solid grip is necessary. It's safer and good to know the knife in your hand is ready for the task. This emergency tool is produced with "ease of use" in mind and all of our knives are designed as EDC knives. This means your tool is always easy to access when you need it. It also has the added benefit of being used as a light duty hammer if required

▶️ FULL TANG 5.5 INCH SPEAR POINT BLADE - Each blade is professionally heat treated to balance hardness and toughness, increasing blade durability and capabilities. A harder knife blade can perform better than a softer blade. Toughness is the ability to resist chipping, cracking or breaking. Using a very hard blade without toughness, such as a blade made from glass, will be very easy to break. This is why balancing hardness and toughness is so important and why we heat treat every single blade

▶️ 4.93mm D2 STEEL BLADE - Excellent Balance of Hardness and Toughness. Provides Razor Sharp Cutting Performance, High Durability and Easy Edge Maintenance. We chose this steel so the blade can resist any hard corrosion and increase the life expectancy of the blade edge. This allows our knives to provide razor sharp cutting performance over and over again

▶️ 9.5 INCH FIXED BLADE KNIFE w/ G10 HANDLES - A MUST HAVE knife for emergencies. The knife is designed to fit perfectly into your palm. A solid grip is necessary. It's safer and good to know the knife in your hand is ready for the task. This emergency tool is produced with "ease of use" in mind and all of our knives are designed as EDC knives. This means your tool is always easy to access when you need it. It also has the added benefit of being used as a light duty hammer if required

▶️ FULL TANG 4.5 INCH STRAIGHT BACK BLADE - Each blade is professionally heat treated to balance hardness and toughness, increasing blade durability and capabilities. A harder knife blade can perform better than a softer blade. Toughness is the ability to resist chipping, cracking or breaking. Using a very hard blade without toughness, such as a blade made from glass, will be very easy to break. This is why balancing hardness and toughness is so important and why we heat treat every single blade

▶️ 5mm D2 STEEL BLADE - Excellent Balance of Hardness and Toughness. Provides Razor Sharp Cutting Performance, High Durability and Easy Edge Maintenance. We chose this steel so the blade can resist any hard corrosion and increase the life expectancy of the blade edge. This allows our knives to provide razor sharp cutting performance over and over again

▶️ 11 INCH FIXED BLADE KNIFE w/ G10 HANDLES - A MUST HAVE knife for emergencies. The knife is designed to fit perfectly into your palm. A solid grip is necessary. It's safer and good to know the knife in your hand is ready for the task. This emergency tool is produced with "ease of use" in mind and all of our knives are designed as EDC knives. This means your tool is always easy to access when you need it. It also has the added benefit of being used as a light duty hammer if required

▶️ FULL TANG 5.5 INCH SPEAR POINT BLADE - Each blade is professionally heat treated to balance hardness and toughness, increasing blade durability and capabilities. A harder knife blade can perform better than a softer blade. Toughness is the ability to resist chipping, cracking or breaking. Using a very hard blade without toughness, such as a blade made from glass, will be very easy to break. This is why balancing hardness and toughness is so important and why we heat treat every single blade

▶️ 4.71mm D2 STEEL BLADE - Excellent Balance of Hardness and Toughness. Provides Razor Sharp Cutting Performance, High Durability and Easy Edge Maintenance. We chose this steel so the blade can resist any hard corrosion and increase the life expectancy of the blade edge. This allows our knives to provide razor sharp cutting performance over and over again

▶️ 10 INCH FIXED BLADE KNIFE w/ G10 HANDLES - A MUST HAVE knife for emergencies. The knife is designed to fit perfectly into your palm. A solid grip is necessary. It's safer and good to know the knife in your hand is ready for the task. This emergency tool is produced with "ease of use" in mind and all of our knives are designed as EDC knives. This means your tool is always easy to access when you need it. It also has the added benefit of being used as a light duty hammer if required

▶️ FULL TANG 5 INCH DROP POINT BLADE - Each blade is professionally heat treated to balance hardness and toughness, increasing blade durability and capabilities. A harder knife blade can perform better than a softer blade. Toughness is the ability to resist chipping, cracking or breaking. Using a very hard blade without toughness, such as a blade made from glass, will be very easy to break. This is why balancing hardness and toughness is so important and why we heat treat every single blade

▶️ 4.82mm D2 STEEL BLADE - Excellent Balance of Hardness and Toughness. Provides Razor Sharp Cutting Performance, High Durability and Easy Edge Maintenance. We chose this steel so the blade can resist any hard corrosion and increase the life expectancy of the blade edge. This allows our knives to provide razor sharp cutting performance over and over again

Durable: The material is 5CR13MOV, treated to resist against rust and corrosion for quality long-lasting use.

Handle:  The high friction handles on this knife set are wrapped in a durable heavy-duty nylon cord to offer a steadfast hold for  optimal efficiency when in use.

Case:  These ninja knives come with a convenient and strong nylon case,  along with a belt loop for easy on-the-go carry and safe storage.

▶️ 8.75 INCH FIXED BLADE KNIFE w/ G10 HANDLES - A MUST HAVE knife for emergencies. The knife is designed to fit perfectly into your palm. A solid grip is necessary. It's safer and good to know the knife in your hand is ready for the task. This emergency tool is produced with "ease of use" in mind and all of our knives are designed as EDC knives. This means your tool is always easy to access when you need it. It also has the added benefit of being used as a light duty hammer if required

▶️ FULL TANG 4 INCH DROP POINT BLADE - Each blade is professionally heat treated to balance hardness and toughness, increasing blade durability and capabilities. A harder knife blade can perform better than a softer blade. Toughness is the ability to resist chipping, cracking or breaking. Using a very hard blade without toughness, such as a blade made from glass, will be very easy to break. This is why balancing hardness and toughness is so important and why we heat treat every single blade

▶️ 4.90mm D2 STEEL BLADE - Excellent Balance of Hardness and Toughness. Provides Razor Sharp Cutting Performance, High Durability and Easy Edge Maintenance. We chose this steel so the blade can resist any hard corrosion and increase the life expectancy of the blade edge. This allows our knives to provide razor sharp cutting performance over and over again

▶️ 10 INCH FIXED BLADE KNIFE w/ G10 HANDLES - A MUST HAVE knife for emergencies. The knife is designed to fit perfectly into your palm. A solid grip is necessary. It's safer and good to know the knife in your hand is ready for the task. This emergency tool is produced with "ease of use" in mind and all of our knives are designed as EDC knives. This means your tool is always easy to access when you need it. It also has the added benefit of being used as a light duty hammer if required

▶️ FULL TANG 5 INCH CLIP POINT BLADE - Each blade is professionally heat treated to balance hardness and toughness, increasing blade durability and capabilities. A harder knife blade can perform better than a softer blade. Toughness is the ability to resist chipping, cracking or breaking. Using a very hard blade without toughness, such as a blade made from glass, will be very easy to break. This is why balancing hardness and toughness is so important and why we heat treat every single blade

▶️ 4.90mm D2 STEEL BLADE - Excellent Balance of Hardness and Toughness. Provides Razor Sharp Cutting Performance, High Durability and Easy Edge Maintenance. We chose this steel so the blade can resist any hard corrosion and increase the life expectancy of the blade edge. This allows our knives to provide razor sharp cutting performance over and over again