Best House Floor Jacks in 2026

[Lift Your Foundation]: Whether age or disaster led to your sagging floors, lift them with the BISupply Basement Floor Jacks for temporary leveling support during construction renovations and repairs

[Strong Enough]: Prior to extending, secure base plate to your concrete floor slab; Weight capacity per jack up to 9,700lb (4,400kg) at all height extensions

[Adjust to Your Needs]: Our basement support columns screw jack post adjusts from 12-16in (30.48-40.64cm) tall using turning bar and screw bolt for temporary bracing

Compression Load Range* 18,000 lbs.

Premium quality heavy duty high carbon steel

Finished with corrosion-resistant powder (exceeds ASTM-B117-85)

No carriage bolts , screws and other installment accessories included with this product

DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks; Pick up the slack temporarily fortifying your homes structure with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack; These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs

BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion; Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate and (2) locking pins; ISO9001 certified for strength and durability

ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 19 inches to 36 inches (48.3 to 91.4 cm) for different height requirements; The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses

Specification: 10 ton (20,000 lbs) capacity with a 4.92" minimum lift height and 8.46" maximum lift height

Double Ram: Features lower minimum lift height and higher maximum lift height than common bottle jacks; Suitable for wider variety of vehicles including trucks and SUVs

Ultra Low Profile: The retracted height is as low as only 4.92", suitable for extreme working conditions

Specification: 4 ton (8,000 lbs) capacity with a 6.69" minimum lift height and 16.56" maximum lift height

Double Ram: Features lower minimum lift height and higher maximum lift height than common bottle jacks; Suitable for wider variety of vehicles including trucks and SUVs

Extension Screw Top: Adjust the screw before actually stroking the pump, saving time and effort

Adjustable, easy-to-assemble, easy-to-install floor jacks are designed for temporary support during remodeling projects to reinforce stairs, porches, decks, or weak floors

This product is manufactured in united states

This product meets customer requirement

Jack provides support for leveling and stabilizing floor beams

The telescopic style positions the brace for better leveling

Includes a screw and turning bar for easy height adjustment

Jack it Up: With 3 tons/6600 lbs strong loading capacity, VEVOR's floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 5.12"/130 mm. Max. Height: 20"/508 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a single piston quick hydraulic pump allows you to pump the jack to the desired height easily.

Rigid Steel Construction: Boasts heavy-strength steel construction, our low-profile jack is durable and sturdy to use. It is equipped with steel wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll.

The electric car jack must be used on a flat and firm ground Remember, never to use it on a sloped ground! Turn on the warning light as a reminder, park the car well and ensure that the car has been braked safely. Our electric car jack Heavy-duty steel construction, large base and saddle make this12V car jack strong and stable. wear-resistant.contact suface and compact triangle design for extra stability

Best choice for Sedan and SUV(under 3T): Two removable raised heads are respectively designed for Sedan and SUV. Vehicles under 3 ton can be easily lifted, but DO NOT use it on the trucks and those beyond 3 ton. Two-way Power Supply: It can be connected to either a 12 V outlet or car battery, two connector choices make it a necessary car repair tool when run into roadside emergencies. reinforced solid screw rod makes the electric car jack will not easily be torn apart or twisted

Get Done in Minutes: It takes ONLY about 2 minutes to reach a maximum height (17in) with loading capacity as high as 3T; Electric Impact Wrench powerful latest and upgraded version removes the nuts by pressing the switch for about 5 seconds.Whether men or women can replace the tire with ease in any emergent case.Save Effort : electric car Jack with Controller is perfect for emergent roadside tire change kit and repair

√4 IN 1 ELECTRIC HYDRAULIC JACK: The electric car jack must be used on a FLAT and FIRM ground! This 4 in 1 electric hydraulic jack comes in an electric hydraulic jack, an air pump and an impact wrench. The electric car jack is capable of lifting car(under 5 ton) up to reach its max height(height range:5.9~17.7 inch) within 2 minutes

NOTES FOR USING ELECRIC IMPACT WRENCH: First: Paying attention to the sizes when selecting the sleeve; Second: The signal "II" means loosening the screw, and you have to keep pressing "II" until the screw has been loosened.The signal"I" means tightening the screw, and you have to keep pressing "I" until the screw has been tightened

√SAFE AND SECURE TO USE:Our electric hydraulic jack is will automatically stop working after reaching the height limit.The electric car jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use

[Lift Your Foundation]: Whether age or disaster led to your sagging floors, lift them with the BISupply Basement Floor Jacks for temporary leveling support during construction renovations and repairs

[Strong Enough]: Prior to extending, secure base plate to your concrete floor slab; Weight capacity per jack up to 11,200lb (5,080kg) at 54in minimum height and 2,500lb (1,134kg) at 150in maximum height

[Adjust to Your Needs]: Our basement support columns screw jack post adjusts from 54-150in (137.2-381cm) tall using turning bar and screw bolt for temporary bracing

[Make Structural Repairs]: The BISupply Adjustable Shore Jack Post House Support Jacks 1-Pack transforms 4x4 inch (10.2 cm) square lumber into a temporary support or non-primary support (not intended for permanent installation)

[Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height; 4-inch height adjustment thread for shoring tension; 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height; 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes

[Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion; Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit; Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used

LIGHT DUTY STEEL SHORE: The Ellis Light Duty Steel Shore is an adjustable support jack that provides temporary or permanant support. This functional and dynamic jack post is the perfect tool for any residential or commercial construction project.

EASY TO USE: Simply turn the wing nut to adjust the height. Once the desired height has been reached use a 6mm Allen wrench to tighten the set screw located on the side of the wing nut. This will lock the wing nut into place to keep the shore from further adjustment.

SAFE & SECURE: Built with high quality materials, this adjustable support jack is extremely powerful and long-lasting. The light duty steel shore is a perfect solution for sagging floors and foundation issues. It provides additional support in crawl spaces, attics, decks, wood, steel, and concrete beams.

HYDRAULIC LIFT POWER: Made from durable alloy steel, along with heavy duty castor wheels, and a foot pedal operated lift. This dolly cart will help you position vehicles with tires up 12" wide with ease and is an essential auto car accessory for any shop, garage, storage unit or dealership to make positioning vehicles safe.

BEST USE: These Eastwood heavy duty hydraulic car dollies each have an impressive individual load rating of 1300 lbs, and are suitable for lifting inflated or flat tires. Perfect for moving your non runner barn find, or your shiny showpiece ride. Once lifted smooth rolling & positioning comes courtesy of the heavy duty ball bearings in the 4 large castor wheels.

EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.

[3.33-TON CAPACITY] - K tool International service jack rated to lift up to 3.33 tons or 6,660 lbs.

[DURABLE] - K Tool service jack is built for extra lifting and maneuverability for all load lifting needs. Heavy-duty steel construction provides stability and positioning.

[LONG PUMP HANDLE]-  50" long pump handle for easy pumping under load

Capacity: 8 ton (16,000 lbs), and the lift height ranges from 6.69" to 16.94"

Engineered with double ram lift system, providing wider lift range than common bottle jacks

Equipped with a extension screw top, adjust it before actually pumping

Capacity: 10 ton (20,000 lbs), and the lift height ranges from 4.92" to 8.46"

Engineered with double ram lift system, providing wider lift range than common bottle jacks

Ultra Low Profile: The retracted height is as low as only 4.92", suitable for extreme working conditions

Floor Jack

BUILT TO LAST - Constructed of heavy-duty steel and black oxide finish, these foundation levelling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.

MULTI-FUNCTIONAL - These house levelling jacks are easy to install and adjust. They are designed for stabilizing and supporting beams or joists during construction and repair.

ULTIMATE SUPPORT - The floor jack post can be adjusted and set to any height within the given range, allowing it to be used in applications with different height requirements. Welded steel provides strength. A turning bar and screw bolt are used to adjust the floor jack post's height.

Minimum lift height: 9-1/2"; Maximum lift height: 13-3/8"; Base Size: 4-1/2"x 4-1/2" Saddle Diameter: 3-5/16" Handle Socket Size: 9/16" in Dia.

Heavy duty bell-shaped cast base with corrugated steel and 360° swivel with anti-skid saddle for easier load leveling and positioning

High-quality steel enhances stability, lead-free paint finish prevents rust and stains and the self-locking design provides additional safety

High quality and brand new.

Heavy duty hydraulic pump lifts 300 lb. to a max height of 25 inches.

Five position wheel width adjustment fits lawnmowers and ATV/Quads from 36 in. to 51 in. wide center-to-center

Durable Foundation Support: Old houses and natural disasters often cause floor joists to crack, support beams to rot, and porches or decks to sag. Use adjustable jacks to reinforce your home's structure to make up for these shortcomings. Basement floor joist support jacks are available.

Long-lasting: The upper part of these foundation leveling jacks is made of galvanized finish, and the lower part is made of black oxide finish, which is strong, durable, and long-lasting, with anti-rust and anti-corrosion properties.

Function:The jack provides support for leveling and stabilizing floor joists, with a height range of 16 inches when raised and 12 inches when lowered, making it durable. In a vertical position, the center position can withstand 8000 pounds.

DESIGNED-The plug-in design allows the jack to reach the desired height by turning the adjusting nut under pressure.

SUPPORT - Perfect temporary or additional support for primary areas such as stairs, porches, decks, crawl spaces and heavy load areas. This service jack can also be used permanently as a secondary support.

Durable-Built with high quality materials,Coated to prevent corrosion.Although the Mini Screw Jack is small in size, it is big in strength and durability.