Best Torin Pump Jacks in 2026

COLORS MAY VARY: XL20 = A20015

LOW PROFILE FRAME: For easy access under low ground clearance vehicles.

DUAL PUMP PISTONS: Quickly raises the floor jack saddle to load.

Product 1: Includes 9-pc. 1 in. drive deep 6-pt. impact sockets: 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2 in.; Metal storage case

Product 1: Designed for use with impact wrenches

Product 1: High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off

Foot activated pump pedal for hands free raising of the rams

Extended to reach a maximum height of 74 inches

Lowered telescopic rams enable the transmission to be transferred from the jack to the work table

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a handy side handle, making it easy to carry.It has a machined, non-slip knurled handle

Lifting range from 3.5" to 14" allows you can gain easy access under low-profile vehicles

LIGHTWEIGHT AIRCRAFT-GRADE ALUMINUM: Allows For Easy Maneuverability

LIFTING CAPACITY: 6,000 lbs.

DUAL PUMP PISTONS: Quickly Raises The Floor Jack Saddle To Load

Hydraulic long ram jack has a double piston pump and clevis base designed for residential and commercial use

Features a lifting range from 24-13/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity; Clevis style base provides added versatility

Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength; Fits most garage/shop cranes, engine hoists, and more

Air hydraulic bottle jack is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more; Wide, rugged base adds stability and strength

Features a lifting range between 10-7/16" to 20-1/16" with a 20 ton (40,000 lb) load capacity; Designed for operating either manually or pneumatically

Automatic dual spring controlled lowering system; Fully polished and chromed cylinder rams enhanced with high-performance seals

Pit crew quality design, machined from lightweight aircraft aluminum with a sapphire anodized finish

Industrial quality for professional mechanics and hardcore automotive enthusiasts

Rapid Pump exclusive dual parallel pump system lifts with far fewer pumps. Rubber saddle pad to prevent marring.

LOW PROFILE FRAME: For Easy Access Under Low Ground Clearance Vehicles

LIFTING CAPACITY: 6,000 lbs.

QUICK LIFT: Double Pump Pistons Raise Saddle To The Load Fast

Product 1: Four leg steel base

Product 1: Made of heavy schedule pipe for added strength and stability

Product 1: Quick and easy height adjustment.Base Length:38.27 inch

Lightweight aluminum body nearly half the weight of steel jacks

Rapid-Rise Technology with dual pump pistons for fast saddle rise to load

Includes pair of 3 ton aluminum jack stands

Product 1: Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Product 1: Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Product 1: Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

2.75" min height is ultra-low and ideal for sports cars, exotic cars, and flat tires

24" max height is versatile and lifts high enough for pick-ups and suv's

Rapid rise technology with dual pump pistons reaches max height quickly in 6.5 pumps

Designed for residential and commercial use that can be widely used for cars, trucks, and SUV's; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity; Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 2-3/8"

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks

Hydraulic bottle jack designed for residential and commercial use; Wide, rugged base enhances stability and strength; Meets ASME safety standards. Product Dimensions (LWH) for jack and storage case- 7.4 x 4.72 x 11.02 inches

Features a lifting range of 7-1/2" to 14-5/16"" with a 4 ton (8, 000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction with reinforced stress points for added durability; Inner/outer welded structure delivers leak-free performance

Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches.

A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety.

This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another.

[Poweful Car Jack] Electric car jack is hydraulic driven, it can lift vehicles within 5 tons in less than 2 mins to its Max. height (lifting range: 6.1-17.7 inches). The high power engine installed in the hydraulic jack nearly matches all the autos, sedan, SUV, MPV, pickup and truck. The powerful hydraulic srenth is more competitive than an other car jacks.

[Change Tires Easily] Car jack hydraulic type can be supplied with two methods: cigar lighter and car battery. We recommend the car battery to our customers, the current would be more stable. Tire pumping inflator is installed in the floor jack, equipped with tire pressure display, you are able to monitor the tire pressure easily. If you are a guy who is not used to use normal car jack and has never changed a tire, you'll be amazed how easy and quick it is.

[Portable Impact Wrench] This electric car jack kit contains a portable ergonomic-designed electric impact wrench and two sleeves with two sizes, matching more vehicles in the market. Powerful motor and precisely-designed speed control system, making it possible to screw/unscrew in a very short time. This electric car jack kit can save you a lot of time and energy.

3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Product 1: QUICK/ EASY: quickly inflates tire sidewall to seat the bead onto wheel rim for all tires up to 24.5”, including regular vehicles, trucks, tractors, RVs, ATVs and more

Product 1: CE APPROVED: heavy duty CE approved all steel construction tank with powder coating finish for durability

Product 1: EASY TO READ GAUGE: accurately fill the tank from standard shop compressor at recommended operating pressure of 87-116 PSI with the included easy-to-read gauge

HIGH CAPACITY - This jack has a load capacity of up to 20 tons (44000 LBS) and a maximum pressure of 200PSI; With its powerful function, it is the best tool for car maintenance and auto emergency treatment

STURDY ROD AND SPRING - The height of the rod can be adjusted flexibly, with strong resistance to pressure and corrosion; Equipped with a high complex double spring, it has the compact structure to ensure that the product can be successfully reset after use

SPLICING HANDLE - The 2 handles can be connected to each other, which is convenient to use and easy to store; The bottom of the handle is equipped with a plastic sheaths, which can effectively protect the hands from injury

STRONG: Built to meet or exceed ANSI and PALD standards for construction, durability and performance

VERSATILE: Works on a huge range of vehicles, with a lift range from a low 3 inches to a high 19-1/2 inches

FAST: Save time working on vehicles thanks to dual-piston quick-lift pump that raises the unloaded lift arm to full height in 7 pumps

Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading

Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly

Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose

Designed for residential and commercial use that can be widely used for cars, trucks, and SUV's; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 8-1/4" to 15-15/16" with a 6 ton (12,000 lb) capacity; Has a lifting height of 4-15/16" and an adjustable screw top extension that adds an additional height of 2-3/4"

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8, 000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 3-7/8" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Quick lift design

Removable saddle

Minimum Lift Height: 3-15/16" inches

⚠Note: Never use it on a sloped ground, be sure to use it on a flat road and place in the direction parallel to the car. 🧰It takes about one minute for the floor jack to reach a max. height (17.7in) with max load capacity of 5T. When the car is lifted, use the impact wrench to remove the screws and change tire, the built-in tire pump will inflate the tire quickly and get your work done. This electric hydraulic floor jack is designed perfectly to deal with a flat tire without striking a blow.

🧰Best Choice for Sedan & SUV: The jack head fit for both Sedan and SUV, cars under 5 ton can be easily lifted. It can be connected to either a 12V car cigarette lighter or car battery, it is a necessary repair tool when run into roadside emergencies. 👉Pay attention to the positive and negative poles of the cable connectors on both ends, if reversely connected, there will be screw rod bending, abnormal sound and button failure.

🧰Safety Guarantee: When the air jack reaches the maximum height, it will stop working automatically. The protruding particles on the top of the jack will increase the friction. The self-locking structure of the jack can prevent the car from falling suddenly and ensure the safety of the car and people. The internal circuit breaker of the jack is ready to protect your car from overload.

Jack it Up: With 3 tons/6600 lbs strong loading capacity, VEVOR's floor jack can help you raise your car for whatever reason. Replace a tire, change oil or maintain the brake, whether you are a professional, car enthusiast, or weekend DIYer to take matters into your own hands!

For All Your Lifting Needs: Min. Height: 3.35""/85 mm. Max. Height: 19.69"/500 mm. The wide lifting range meets your lifting needs of family cars, trucks, SUVs, etc. And a dual parallel pump system allows you to lift to the highest in full 7 strokes. Speed up your process.

Rigid Steel Construction: Boasts heavy-strength steel construction, our low-profile jack is durable and sturdy to use. It is equipped with steel wheels (2 rear wheels are universal), making the jack easy to maneuver, steer, or roll. And the design of the magnetic tray on the top is convenient for you to place tools.

The product is 12Ton bottle jack

Easy and simple use kit

The product is manufactured in china