Best Torin Pump Jacks in 2026

Product 1: Includes 9-pc. 1 in. drive deep 6-pt. impact sockets: 1, 1-1/8, 1-1/4, 1-3/8, 1-1/2, 1-5/8, 1-3/4, 1-7/8, 2 in.; Metal storage case

Product 1: Designed for use with impact wrenches

Product 1: High-torque, 6-point sockets grip flat sides of fasteners, not corners, preventing round-off

Hydraulic long ram jack has a double piston pump and clevis base designed for residential and commercial use

Features a lifting range from 24-13/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity; Clevis style base provides added versatility

Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength; Fits most garage/shop cranes, engine hoists, and more

Product 1: Hydraulic bottle jack designed for residential and commercial use; Serrated, heat treated saddle provides generous lifting area and secure grip

Product 1: Features a lifting range of 8-13/16" to 17-5/8" with a 10 ton (20,000 lb) capacity; Adjustable screw top extension adds versatility

Product 1: Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance

Designed for residential and commercial use that can be widely used for cars, trucks, and SUV's; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity; Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 2-3/8"

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks

Hydraulic bottle jack designed for residential and commercial use; Wide, rugged base enhances stability and strength; Meets ASME safety standards. Product Dimensions (LWH) for jack and storage case- 7.4 x 4.72 x 11.02 inches

Features a lifting range of 7-1/2" to 14-5/16"" with a 4 ton (8, 000 lb) capacity; Adjustable screw top extension adds versatility

Engineered using a drop forged alloyed steel construction with reinforced stress points for added durability; Inner/outer welded structure delivers leak-free performance

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles.Handle Length:24.5 inch

Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches.

A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety.

This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another.

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Product 1: 3-Ton jack with Heavy-duty steel construction provides stability and endurance. Saddle lifts: 5-1/4'' to 18-1/4'' (133mm to 465mm)

Product 1: Bullt-in safety valve protects against jack over-loading Complete with long two piece handle for ease of operation and reduced operator fatigue.

Product 1: Swivel saddle and rear casters for floor jacks providesmooth maneuvering and positioning. “Quick Start” double pump technology for fast operation to contact point.

Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading

Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly

Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose

Designed for residential and commercial use that can be widely used for cars, trucks, and SUV's; Serrated, heat treated saddle provides generous lifting area and secure grip

Features a lifting range of 8-1/4" to 15-15/16" with a 6 ton (12,000 lb) capacity; Has a lifting height of 4-15/16" and an adjustable screw top extension that adds an additional height of 2-3/4"

Engineered using a drop forged alloyed steel construction for quality and durability; Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8, 000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 3-7/8" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Racing floor jack can be used for general or specialty use and features a 1.5 ton (3,000 lb) capacity

Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-1/2" to 14-1/8" allows you can gain easy access under low-profile vehicles

This air hydraulic bottle jack has 5 Ton (10,000 LBs) and lift range is from 8-1/4" to 16-15/16". Working air pressure ranges from 100 to 175 PSI.

This pneumatic bottle jack is equipped with metal nozzle which has filtering function to remove impurities, increases air flow speed and efficiency.

The four corner air pump with up to 5000 cycles and a stronger air tube built-in iron core increase the services life of this bottle jack.

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability; Extra long saddle neck saves time when lifting higher vehicles

[Capacity]:Hydraulic bottle jack is capable of 4 ton(8800 lbs).Lifting min height 7.4",max height:14.3".Adjustable height:2.36".Lifting height:4.54".Weight:6.2(lb).4 Ton bottle jack is use for sedans,suv,travel trailer,station wagon,mini bus,van.Easy to carry and place in the trunk of vehicles

[Durable Welded Frame]:Adopt thick drop forged alloyed welded steel construction of bottle jacks for very sturdy,durable and prevent leak oil.Car jack surface paint is oil-proof and anti-corrosion.Easy to clean

[Automatic Safety Valve]:Each jack is tested for safety. Built-in oil-bypass and secure valve will automatically protect jack hydraulic system when overload.Keep Red bottle jacks from being damaged and keep you safe.Heavy duty jack accessories with steel long handle.Pump handle lifts without any effort and comes down smoothly

Hydraulic Trolley Floor Jack Is Constructed With Heavy Duty Steel, Providing Long Term Durability With An Industrial Luster

Features A 2.5 Ton (5,000 Lb) Capacity With A Minimum Lifting Height Of 3-3/8" And A Maximum Height Of 14-15/16"

Ideal For Most Cars, Trucks, And Suvs; Safety Bypass System Prevents Over-Loading And Ensures Safe Operation

Hydraulic bottle jack designed for residential and commercial use; Lifting range of 8.15" to 15.83" with a 6 Ton (12,000 lbs.) capacity

Adjustable screw top extension adds versatility; Heat treated extension screw allows low pickup height adjustment and maximum lift height

Serrated, heat treated saddle provides large lifting area and a secure grip; Wide, rugged base adds stability and strength

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2.5 ton (5,000 lb) capacity with a minimum lifting height of 3-3/8" and a maximum height of 14-15/16"

Ideal for most cars, trucks, and SUVs; Safety bypass system prevents over-loading and ensures safe operation

Low profile car jack design allows for lift range from 8.5 inches to 23 inches. Slow controlled lowering of load by a conveniently located release valve knob.

1000 LBS capacity to help remove and install most transmissions from cars and trucks. Safety overload system prevents the floor jack from being used beyond its capacity.

Versatile saddle design allows for total adjustments in every direction. Pump handle rotates 360° for operation from any direction.

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-7/8" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability

Handles up to 8-Ton: This 8-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications.

26" -45.7" Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 8 ton/17363 lb. in weight. And the slow release function for reliability and security.

Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift.

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 2.5 ton (5,000 lb) capacity with a minimum lifting height of 3-3/8" and a maximum height of 14-15/16"

Ideal for most cars, trucks, and SUVs; Safety bypass system prevents over-loading and ensures safe operation

It's the ideal jack for use on hydraulic cranes, engine hoists, and a wide variety of applications for mechanics, truckers, farmers and off-road enthusiasts

High quality large diameter hydraulic steel cylinder unit results in lower oil pressure needed to raise the load, helping to reduce wear and extend service life

Hydraulics are powered with a high quality oil, which offers better corrosion resistance and high/low temperature flexibility, allowing the unit to operate at temperatures between 40 degrees F and 105 degrees F

Use this press for at-home mechanics or your small repair business

Measures 27.5" L x 26.75" W x 57.25" H; maximum 20 ton capacity; horizontal-slide ram extends from 2.75" - 10"

Can be used with included manual hand pump

Air/Hydraulic Bottle Jack: VEVOR 20 tons/44092 lbs bottle jack is ideal for large size and heavy-duty applications. It integrates a pneumatic jack with a hydraulic jack into this one car bottle jack. It is ideal for lifting heavy-duty machinery, industrial construction equipment, farm vehicles, and more.

6-5/8" Lifting Range: With its powerful pneumatic and hydraulic power, our bottle jack can lift a maximum of 20 tons/44092 lbs and has a lifting range of up to 10-1/4 in/26 cm to 20 in/51 cm.

Labor-saving Dual Operation: Working pressure range: 120 psi-200 psi. Manual lifting is also possible with the splicing handle. The design allows the jack to work securely even without power.

Features a lifting range from 24-7/16" to 44-1/8" with a 8 ton (16,000 lb) load capacity

Long ram jack is constructed of heavy-duty steel with a heat-treated chrome cylinder for added strength. Clevis style base provides added versatility

Glide-action pressure pump is designed to lift with minimal effort; Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits

Hydraulic trolley floor jack is constructed with heavy duty steel, providing long term durability with an industrial luster

Features a 3 ton (6,000 lb) capacity with a minimum lifting height of 5-11/16" and a maximum height of 20-7/8"; Ideal for most cars, trucks, vans, and SUVs

Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability