Best Hydraulic Lifting Pumps in 2026

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one at most. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has 1.5-ton/3,000 lb. lifting capacity with 3-1/8 in. to 14-1/4 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Easy Operation: The 1.5 Ton floor jack comes pre-filled with oil, it is ready to use after simply assembling the 2 handles together and putting it into position. Please just remember to turn the long handle clock-wise until tight before raising, and VERY SLOWLY turn the handle gently counterclockwise to lower it.

Includes Two Double Locking Jack Stands: IT COMES WITH 2 PACKAGES. The heavy-duty jack stands safely support up to 6000 lb., They are constructed with heavy-duty, solid steel body panels and welded-in reinforcement braces for added strength and durability. These jack stands feature an easy-to-use ratcheting system to make quick height adjustments lift height of 12-13/32 in. to 17 in., and double-locking mobility pins for extra safety and security.

Durable but Lightweight: BILT HARD hydraulic floor jack features industrial quality for professional mechanics and hardcore. It is constructed of a high strength aluminum billet and some steel components, weighs only 75% of the steel one. The sapphire anodized finish on the surface also makes it rust and corrosion resistant.

Low Profile: The aluminum racing floor jack has a 3-ton/6,000 lb. lifting capacity with a 3-7/8 in. to 19-1/2 in. lifting range, it provides you with a bottom height low enough to get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Package includes: 1 Floor Jack of 3 Ton, 2 Jack Stands of 3 Ton, Floor Jack Handles, Manual. Construted with heavy duty steel, the floor jack with jack stands combo set provide easy lifting and long term durability

The floor jack features dual piston quick lifting pumps that allow you to easily lift the jack to the desired height, rubber saddle to help protect your vehicle, and overload protection valve that protect you from lifting overweight items that weigh more than the jack's capacity

BILT HARD Hydraulic Trolley Floor Jack provides weight capacity up to 3 ton (6000 lb) with lifting height ranges from 3.34-18.50 inches, enables an easy access to low profile vehicle. It is equipped with four 360-degree swivel casters for convenient and smooth move

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity

Constructed of durable, high-strength steel; Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles

▷[IMPORTANT PARAMETERS]---Tonnage: 50T | Stroke: 0.6”/16mm | Self height: 2.8” /72mm | Outer diameter: 5.8x5.0”/148x128mm | Internal diameter: 3.1”/80mm | Weight: 18.7lbs /8.5kg | Effective area: 12.2 square inches/78.5cm2 | Usded with Pump: CP-700 | Connector: ZG 3/8.

▷[SMALLER SIZE & GREATER WORKING CAPACITY]---The hydraulic porta power ram has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.

Powerful and convenient: The service jack is specially designed to meet all load lifting needs for extra lifting and maneuverability. The durable steel body provides rigidity and stability. The vehicle point can rotate the saddle for easy positioning under the vehicle

2-piece handle: This heavy-duty floor jack is equipped with a long two-piece handle for easy operation and reduces operator fatigue

Vehicle protection: Double pump pistons quickly lift the floor jack saddle to the load, and are designed with rubber saddles and foam handle bumpers to protect the vehicle

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) load capacity; Foam bumper on the handle helps protect your vehicle from damage

Constructed of durable, high-strength aluminum and steel; Dual piston quick lift pump allows you to easily raise the jack to the desired height

Lifting range from 3-15/16" to 18-5/16" allows you can gain easy access under low-profile vehicles

Dual Rapid Pump：Equiped with a exclusive dual parallel pump system，the low profile car jack can lift most work loads in just 3-1/2 pumps! Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Low Profile: Featuring a 3 ton (6,000 lb) lifting capacity and 2.95 inch to 19.88 inch lifting range the racing floor jack can get underneath a lower vehicle while still providing enough maximum height to lift the vehicle off the ground.

Stable and Durable: Constructed of durable, high-strength steel. Oarlike hydraulic floor jack features industrial quality for professional mechanics and hardcore. The anodized finish on the surface also makes it rust and corrosion resistant.

Features: Heavy duty pumps, rams and cylinders are precision machined and inspected to ensure long service life and superior performance

Body: The super long 56" body administers easier lifting of vehicles with long overhangs; The handle mounted, locking control lever has 3 positions for better versatility in under car positioning

Foot Pump: For a manual hydraulic long chassis, the foot operated pump aids in quick lifting efficiency; The model comes included with an automatic overload safety valve for added safety and internal pressure relief

High and Low Profile Professional Floor Jack: Lifting range from 3.86" to 30.12" that is suitable for jacking up a light-duty car with low chassis as well as heavy-duty cars with a high chassis; Fits most automotive sedans, SUVs, and offroad trucks due to its 3 Ton (6,600 lbs) lift capacity

High Opeartion Performance with Dual Piston: Unique reinforced structural foldable arm gives more lifting choices; Features thick u-channel frame side plates for stablilty and durablity as well as a sealed cast iron pump base that operates double pistons for faster rising action

Brand New Racing Floor Jack Functions and Appearance Design: Rear casters pivot 360 degree for easy positioning and usage; Overall streamlined design conforms to mechanics for best loading capacity

[3.5-TON CAPACITY] - K tool International service jack rated to lift up to 3.5 tons or 7,000 lbs.

[4 PUMPS]- Only 4 pumps to max height (under no load). Exclusive K Tool International design

[SPECIFICATIONS]- Overall Length 28.25", Overall Width 14.5", Saddle Diameter 4.5", Low Height 3.5"; Max Height 21.38". Handle Length 50.25";

This hydraulic jack is commonly used in steel, bridge, electric power, chemical, machinery and other industries.

Our FPY series jacks have the advantages of small size, light weight, flexibility, large working capacity and high lifting force.

When using hydraulic jacks, the bottom should be flat and hard.