Best Taixin in 2026

Taxinxinhyd Air Hydraulic Pump: AIR PRESSURE IS 108-120 PSI, Max. Hydraulic Pressure is 10000PSI, Usable Oil Capacity is 42cu.in(690cu.cm), Air Inlet Size: 1/4 NPT Femal, Oil Port Size: 1/4 NPT

Swivel Coupling Simplifies Hydraulic Connection And Pump Operation, Operates In All Directions For Increased Versatility In Use And Mounting;

Air Line Lubricator: Taixinhyd Air Hydraulic Pump has Air Line Lubricator with Quick Connect Coupler, EXTEND this AIR HYDRAULIC FOOT PUMP service lifetime and performance.

64 FITTINGS---This 64-piece ORFS hydraulic cap and plug kit by Zelcan gives you plenty of fittings in the 6 most commonly needed sizes: ORFS 4, 6, 8, 10, 12, and 16.

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments.

EASY TO USE---These ORFS caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly.

2 sets Ag hydraulic quick connect tractor couplers,easy to connect and disconnect,with hydraulic coupler dust caps

Body Size: 1/2″ Body,Thread Size: 1/2″ NPT Thread, Poppet Valve

The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal and ISO 7241

【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers.

【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion.

【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system.

【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers.

【100 FTHYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 1/4 inch, and the outer diameter 0.59 inch. With a 5800 PSI working pressure, the hydraulic line is explosion-proof.

【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion.

64 FITTINGS---This 64-pc. JIC hydraulic cap and plug kit gives you plenty of fittings in the 6 most commonly needed dash sizes: -04, -06, -08, -10, -12, and -16

SUPERIOR QUALITY---Our hydraulic fittings are made from 45# structural steel to withstand high heat and pressure and galvanized to resist corrosion in even punishing environments

EASY TO USE---These JIC caps and plugs have precision-engineered standard threading to install smoothly, seal your hoses, tubes, and pipes hermetically, and come off cleanly

【Adjustable Resistance】Rotating the knob to easily adjust the resistance, rang 22-440 lbs free adjustment. Just rotating the knob, resistance can be adjusted, faster than car shifting.

【Durable Material】Double-layer steel tube is firm and durable. The material is strong and more realistic. The training machine has 440 lbs bearing capacity.

【Stable Triangle Structure】Stable triangle center design makes the exercise more stable, which is a safer and more scientific structure.

Length: 72"

4,000 PSI

Inside diameter: 3/8"

This Universal Quick Disconnect Coupler & Plug set features a new improved design for high flow performance and maximum service life.

1/2" NPT Thread, 1/2" Body (see size chart), These flat face couplers connect to models of skid steers loaders including Bobcat, Case / New Holland, Kubota, and many others

Heavy Duty Design with 5076 PSI Rating and 23 GPM Max Flow Rate

Hydraulic garage floor jack can be used for general or heavy-duty industrial use and features a 4 ton (8,000 lb) capacity

Dual piston pump lifts loads 5 times faster than a single pump and is ideal for most cars, trucks, and SUVs

Lifting range from 4" to 20" allows you can gain easy access under low-profile vehicles; Wide stance provides added stability under load

Complete kit includes a variety of auto body, frame repair and construction components for lifting, pushing, pulling, bending, straightening and spreading

Ideal for your workshop or garage and has a 4 ton (8,000 lb) load capacity; Includes 20-7/8", 17-3/4", 9-3/4", 6-1/4", and 4-1/2" extension tubes with a snap-lock design for quick, easy assembly

Features a serrated saddle, spread wedge, rubber head, flat base, ram toe, plunger toe, wedge head, V-base, male connector, and a hydraulic hose

3/8in. pipe thread

40deg F-212deg F range

Black oil-resistant synthetic rubber construction

The 3/8" hydraulic quick couplers with 3/8" NPT thread+ 3/8” body,with 2 dust caps.

The 3/8" 10000 psi hydraulic coupler interchange with models of Enerpac C-604 Parker 3000 Series Perfecting T Series Snap Tate 76 Series Stucchi IVHP Series Dip PVM Series Safeway S30 Series

Designed for high pressure applications:hydraulic rams, hydraulic jacks,hydraulic pumps and cylinder

Racing floor jack can be used for general or specialty use and features a 3 ton (6,000 lb) capacity

Constructed of durable, high-strength steel; Equipped with a single piston quick lift pump, allowing you to easily raise the jack to the desired height

Lifting range from 3-7/10" to 18-7/100" allows you can gain easy access under low-profile vehicles

1/2in. pipe thread

40deg F-212deg F range

Black oil-resistant synthetic rubber construction

【One Force Lifts a Thousand Pounds】The hydraulic pump is equipped with a 12V DC motor (rated at 1.6KW) and an 15 quart/15 liter oil tank. The maximum pressure at the outlet can reach 3200PSI/22MPa with your double-acting cylinder can easily lift at least 5 tons of weight.

【Double Acting Hydraulic Power Units】This double-acting hydraulic pump must be used with a double-acting cylinder. The hydraulic pump will have an outlet and return port when controlling your cylinder up and down (for up: A2 for outlet and A1 for return; for down: A2 for return and A1 for outlet), so your cylinder must also have two ports to work.

【The King of Cost Performance】This brand new hydraulic pump is perfect for replacing your dump trailer pump, and you get a great performing hydraulic power unit for half the cost of a dump truck pump store. And it can also be used as a power unit for other hydraulic systems such as garden tractors, forklifts, stackers, small or medium-sized lifting platforms, etc.

【HIGH QUALITY MATERIAL FOR LONGEVITY】- Full high quality construction with high strength and hardness. Good wear resistance, durable in use.

【FAST STARTING】- The high-quality starter ensures a fast start every time and a long using period, Reduce labor intensity, improve work efficiency.

【SAFETY ASSURANCE】- The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh situations.

Product Details: Our hydraulic pump is designed with a 220V AC motor (Power: 2.2kw) and a 6-Liter reservoir. The max relief pressure is 2750 PSI; it is a single-acting pump for power up and gravity down.

Easy to Use: This hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. Extra connectors are offered for replacement.

Reliable Quality: The oil tank is sturdy and durable as it is made of special-treated plastic. As a power unit, this is a perfect replacement pump for remote hydraulic systems. The relief valve ensures safer operation.

Product Details: Our hydraulic pump is designed with a 220V motor (Power: 2.2kw) and a 10-Liter reservoir. The max relief pressure is 2950 PSI; it is a single-acting pump for power up and gravity down.

Easy to Use: This hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. Extra connectors are offered for replacement.

Reliable Quality: The oil tank is durable as it is made of sturdy metal. As a power unit, this is a perfect replacement pump for remote hydraulic systems. The relief valve ensures safer operation.

Product Details: Our hydraulic pump is designed with a 12V DC motor (Power: 1.6-3.0kw) and a 8-quart reservoir. The max relief pressure on A port (SAE#6) is 3200 PSI, and on B port (SAE#6) is 1500 PSI; the flow rate is 2 GPM, and it is a double-acting pump for both power up and power down.

Easy to Use: This 12V hydraulic power unit has been fully assembled in advance. The wiring is simple and comes with operating instructions. Two additional SAE#6 connectors and one 15 ft remote control are included in the package.

Reliable Quality: The dump trailer pump is made of sturdy metal; thus, the oil tank is not easy to crack or be damaged. As a power unit, this is a perfect replacement pump for remote hydraulic systems. Equipped with an overflow valve, it automatically releases when overpressure, safer and reliable.

ISO16028 Standard, New valve design, it can resistance damage from high flow and the pressure of impulse that providing advanced performance

Sleeve locking mechanism is engaged by rotating sleeve after connection. It prevents accidental disconnection when the coupling is dragged along the ground

Durable ball-locking mechanism assures reliable connections every time. A large number of locking balls distributes the work load evenly while providing alignment and swiveling action to reduce hose torque and prolong hose life.

1/2in. pipe thread

40deg F-212deg F range

Black oil-resistant synthetic rubber construction

▷[IMPORTANT PARAMETERS]---Tonnage: 50T | Stroke: 0.6”/16mm | Self height: 2.8” /72mm | Outer diameter: 5.8x5.0”/148x128mm | Internal diameter: 3.1”/80mm | Weight: 18.7lbs /8.5kg | Effective area: 12.2 square inches/78.5cm2 | Usded with Pump: CP-700 | Connector: ZG 3/8.

▷[SMALLER SIZE & GREATER WORKING CAPACITY]---The hydraulic porta power ram has the advantages of smaller size and greater working capacity, especially in a small space location, and has the functions of portability, flexibility, and large lifting force.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.

Rated to 5000 psi for high-pressure hydraulic applications

Solid steel fittings for durability

Black, Nitrile tube for flexibility and oil resistance

Rated to 5000 psi for high-pressure hydraulic applications

Solid steel fittings for durability

Black, Nitrile tube for flexibility and oil resistance

▷[IMPORTANT PARAMETERS]---Tonnage: 50T | Total Stroke: 2.56”/65mm | Self height: 2.8” /71mm | Weight: 19.8lbs /9kg |Oil storage: 113cc| Usded with Pump: CP-700 | Connector: ZG 3/8.

▷[TWO-STAGE OIL OUTPUT DESIGN]---This low profile hydraulic pump is designed in two stage of high and low speed for quick oil output.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use.

▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable.

▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use.

▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.

299 PSI max. working pressure

Temperature Range: -20 to -160F

Non-conductive, closely plied high tensile textile cord reinforcement with neoprene cover

Pre-coupled. An excellent hose for use with petroleum based hydraulic fluids within a temperature range of -40°F to +212°F. Also handles fluids like gasoline, diesel fuels, mineral oils, glycol, lubricating oils, water, etc. Coupled 1/4" solid male pipe thread on each end, hose and couplings meet or exceed SAE J517 100R2AT specifications.

Maximum Operating Temperature: 212 deg. F

Maximum PSI Rating: 5000 psi

[Low Profile & Portable] - This mini hydraulic cylinder is ultra-thin, portable, but strong in load-bearing capacity, which is especially suitable for lifting and supporting work in narrow spaces.

[Automatically Retract] - This hydraulic ram cylinder can automatically retract to the initial height after the oil return valve of the pump is loosened, which is easy and convenient to operate.

[Used with Pumps] - The porta power ram should be used with hydraulic pumps. The 10T/20T can be used with CP-180 hydraulic pump (ASIN: B08QTXY2D2); the 30T/50T can be used with CP-700 hydraulic pump (ASIN: B08QV222RP).